[PATCH] ARM: Dove: add fixed regulator for CuBox USB power

[PATCH] ARM: Dove: add fixed regulator for CuBox USB power

[Sebastian Hesselbarth]

CuBox needs to enable USB power on a gpio pin. Add a fixed regulator
to always enable usb power on boot.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/dove-cubox.dts |   25 ++++++++++++++++++++++++-
 arch/arm/mach-dove/Kconfig       |    2 ++
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index bed5b62..7e3065a 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,6 +26,24 @@
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 0>;
+		};
+	};
 };
 
 &uart0 { status = "okay"; };
@@ -50,9 +68,14 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_12>;
+	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
 	pinctrl-names = "default";
 
+	pmx_gpio_1: pmx-gpio-1 {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_12: pmx-gpio-12 {
 		marvell,pins = "mpp12";
 		marvell,function = "gpio";
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index aedd0ba..36469d8 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -24,6 +24,8 @@ config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
 	select MVEBU_CLK_CORE
 	select MVEBU_CLK_GATING
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the
-- 
1.7.10.4

[PATCH] ARM: Dove: add fixed regulator for CuBox USB power

[Jason Cooper]

On Thu, Dec 27, 2012 at 11:21:59PM +0100, Sebastian Hesselbarth wrote:
> CuBox needs to enable USB power on a gpio pin. Add a fixed regulator
> to always enable usb power on boot.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> ---
>  arch/arm/boot/dts/dove-cubox.dts |   25 ++++++++++++++++++++++++-
>  arch/arm/mach-dove/Kconfig       |    2 ++
>  2 files changed, 26 insertions(+), 1 deletion(-)

Applied to mvebu/dt

thx,

Jason.