From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] ARM: highbank: fix typos with hignbank in power request functions
Date: Sun, 30 Dec 2012 10:15:04 -0600 [thread overview]
Message-ID: <1356884107-30991-4-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1356884107-30991-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
s/hignbank/highbank/
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
arch/arm/mach-highbank/highbank.c | 2 +-
arch/arm/mach-highbank/pm.c | 2 +-
arch/arm/mach-highbank/sysregs.h | 8 ++++----
arch/arm/mach-highbank/system.c | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc24816..981dc1e 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
static void highbank_power_off(void)
{
- hignbank_set_pwr_shutdown();
+ highbank_set_pwr_shutdown();
while (1)
cpu_do_idle();
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 74aa135..0f4ffd6 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -32,7 +32,7 @@ static int highbank_suspend_finish(unsigned long val)
static int highbank_pm_enter(suspend_state_t state)
{
- hignbank_set_pwr_suspend();
+ highbank_set_pwr_suspend();
highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index e13e8ea..707cfd3 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -44,25 +44,25 @@ static inline void highbank_set_core_pwr(void)
writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
}
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index aed96ad..37d8384 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -22,9 +22,9 @@
void highbank_restart(char mode, const char *cmd)
{
if (mode == 'h')
- hignbank_set_pwr_hard_reset();
+ highbank_set_pwr_hard_reset();
else
- hignbank_set_pwr_soft_reset();
+ highbank_set_pwr_soft_reset();
while (1)
cpu_do_idle();
--
1.7.10.4
next prev parent reply other threads:[~2012-12-30 16:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-30 16:15 [PATCH 0/6] highbank fixes for 3.8 Rob Herring
2012-12-30 16:15 ` [PATCH 1/6] ARM: dts: add device_type prop to cpu nodes on Calxeda platforms Rob Herring
2012-12-30 16:15 ` [PATCH 2/6] ARM: dts: fix highbank cpu mpidr values Rob Herring
2013-01-06 2:10 ` Shawn Guo
2012-12-30 16:15 ` Rob Herring [this message]
2012-12-30 16:15 ` [PATCH 4/6] ARM: highbank: fix secondary boot and hotplug Rob Herring
2012-12-30 16:15 ` [PATCH 5/6] ARM: highbank: add a power request clear Rob Herring
2012-12-30 16:15 ` [PATCH 6/6] ARM: highbank: save and restore L2 cache and GIC on suspend Rob Herring
2013-01-02 20:39 ` [PATCH 0/6] highbank fixes for 3.8 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356884107-30991-4-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).