From: avinashphilip@ti.com (Philip Avinash)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries
Date: Wed, 2 Jan 2013 18:54:48 +0530 [thread overview]
Message-ID: <1357133094-30806-2-git-send-email-avinashphilip@ti.com> (raw)
In-Reply-To: <1357133094-30806-1-git-send-email-avinashphilip@ti.com>
EQEP entry is HWMOD entry is not present in HWMOD entry. Also address
ranges specified for EACP & EHRPWM is not correct & HWMOD flags of
ADDR_TYPE_RT is added to PWM subsystem register address space. This
patch
1. Corrects register address mapping for ECAP & EHRPWM
2. Removes HWMOD flags in PWM submodule register address space.
3. Adds EQEP HWMOD entries.
Signed-off-by: Philip Avinash <avinashphilip@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 158 +++++++++++++++++++++++++---
1 file changed, 145 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 081c71e..42a841b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -784,7 +784,7 @@ static struct omap_hwmod am33xx_elm_hwmod = {
};
/*
- * 'epwmss' class: ecap0,1,2, ehrpwm0,1,2
+ * 'epwmss' class: ehrpwm0,1,2 eqep0,1,2 ecap0,1,2
*/
static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
.rev_offs = 0x0,
@@ -864,6 +864,66 @@ static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
},
};
+/* eqep0 */
+static struct omap_hwmod_irq_info am33xx_eqep0_irqs[] = {
+ { .irq = 79 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_eqep0_hwmod = {
+ .name = "eqep0",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_eqep0_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* eqep1 */
+static struct omap_hwmod_irq_info am33xx_eqep1_irqs[] = {
+ { .irq = 88 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_eqep1_hwmod = {
+ .name = "eqep1",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_eqep1_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* eqep2 */
+static struct omap_hwmod_irq_info am33xx_eqep2_irqs[] = {
+ { .irq = 89 + OMAP_INTC_START, },
+ { .irq = -1 },
+};
+
+static struct omap_hwmod am33xx_eqep2_hwmod = {
+ .name = "eqep2",
+ .class = &am33xx_epwmss_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .mpu_irqs = am33xx_eqep2_irqs,
+ .main_clk = "l4ls_gclk",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/* ecap0 */
static struct omap_hwmod_irq_info am33xx_ecap0_irqs[] = {
{ .irq = 31 + OMAP_INTC_START, },
@@ -2559,8 +2619,7 @@ static struct omap_hwmod_addr_space am33xx_ehrpwm0_addr_space[] = {
},
{
.pa_start = 0x48300200,
- .pa_end = 0x48300200 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48300200 + SZ_128 - 1,
},
{ }
};
@@ -2585,8 +2644,7 @@ static struct omap_hwmod_addr_space am33xx_ehrpwm1_addr_space[] = {
},
{
.pa_start = 0x48302200,
- .pa_end = 0x48302200 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48302200 + SZ_128 - 1,
},
{ }
};
@@ -2611,8 +2669,7 @@ static struct omap_hwmod_addr_space am33xx_ehrpwm2_addr_space[] = {
},
{
.pa_start = 0x48304200,
- .pa_end = 0x48304200 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48304200 + SZ_128 - 1,
},
{ }
};
@@ -2629,6 +2686,81 @@ static struct omap_hwmod_ocp_if am33xx_l4_ls__ehrpwm2 = {
* Splitting the resources to handle access of PWMSS config space
* and module specific part independently
*/
+static struct omap_hwmod_addr_space am33xx_eqep0_addr_space[] = {
+ {
+ .pa_start = 0x48300000,
+ .pa_end = 0x48300000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48300180,
+ .pa_end = 0x48300180 + SZ_128 - 1,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__eqep0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_eqep0_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_eqep0_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_eqep1_addr_space[] = {
+ {
+ .pa_start = 0x48302000,
+ .pa_end = 0x48302000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48302180,
+ .pa_end = 0x48302180 + SZ_128 - 1,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__eqep1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_eqep1_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_eqep1_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
+static struct omap_hwmod_addr_space am33xx_eqep2_addr_space[] = {
+ {
+ .pa_start = 0x48304000,
+ .pa_end = 0x48304000 + SZ_16 - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .pa_start = 0x48304180,
+ .pa_end = 0x48304180 + SZ_128 - 1,
+ },
+ { }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_ls__eqep2 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_eqep2_hwmod,
+ .clk = "l4ls_gclk",
+ .addr = am33xx_eqep2_addr_space,
+ .user = OCP_USER_MPU,
+};
+
+/*
+ * Splitting the resources to handle access of PWMSS config space
+ * and module specific part independently
+ */
static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = {
{
.pa_start = 0x48300000,
@@ -2637,8 +2769,7 @@ static struct omap_hwmod_addr_space am33xx_ecap0_addr_space[] = {
},
{
.pa_start = 0x48300100,
- .pa_end = 0x48300100 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48300100 + SZ_128 - 1,
},
{ }
};
@@ -2663,8 +2794,7 @@ static struct omap_hwmod_addr_space am33xx_ecap1_addr_space[] = {
},
{
.pa_start = 0x48302100,
- .pa_end = 0x48302100 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48302100 + SZ_128 - 1,
},
{ }
};
@@ -2689,8 +2819,7 @@ static struct omap_hwmod_addr_space am33xx_ecap2_addr_space[] = {
},
{
.pa_start = 0x48304100,
- .pa_end = 0x48304100 + SZ_256 - 1,
- .flags = ADDR_TYPE_RT
+ .pa_end = 0x48304100 + SZ_128 - 1,
},
{ }
};
@@ -3388,6 +3517,9 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_ls__ehrpwm0,
&am33xx_l4_ls__ehrpwm1,
&am33xx_l4_ls__ehrpwm2,
+ &am33xx_l4_ls__eqep0,
+ &am33xx_l4_ls__eqep1,
+ &am33xx_l4_ls__eqep2,
&am33xx_l4_ls__ecap0,
&am33xx_l4_ls__ecap1,
&am33xx_l4_ls__ecap2,
--
1.7.9.5
next prev parent reply other threads:[~2013-01-02 13:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-02 13:24 [PATCH 0/7] HWMOD fixes for AM33xx PWM submodules and device tree nodes Philip Avinash
2013-01-02 13:24 ` Philip Avinash [this message]
2013-02-08 15:10 ` [PATCH 1/7] ARM: OMAP: AM33xx hwmod: Corrects PWM subsystem HWMOD entries Paul Walmsley
2013-02-08 15:14 ` Hiremath, Vaibhav
2013-02-12 6:57 ` Philip, Avinash
2013-01-02 13:24 ` [PATCH 2/7] ARM: OMAP: AM33xx hwmod: Add parent-child relationship for PWM subsystem Philip Avinash
2013-01-02 13:24 ` [PATCH 3/7] pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver Philip Avinash
2013-01-02 13:38 ` Thierry Reding
2013-01-10 4:11 ` Philip, Avinash
2013-01-02 13:24 ` [PATCH 4/7] ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK Philip Avinash
2013-02-08 15:06 ` Paul Walmsley
2013-02-12 6:55 ` Philip, Avinash
2013-01-02 13:24 ` [PATCH 5/7] ARM: dts: AM33XX: Add PWMSS device tree nodes Philip Avinash
2013-01-02 13:24 ` [PATCH 6/7] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm Philip Avinash
2013-01-02 13:24 ` [PATCH 7/7] ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk Philip Avinash
2013-01-10 4:10 ` [PATCH 0/7] HWMOD fixes for AM33xx PWM submodules and device tree nodes Philip, Avinash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357133094-30806-2-git-send-email-avinashphilip@ti.com \
--to=avinashphilip@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).