From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/7] arm64: ARMv8 RTSM model SoC support
Date: Fri, 4 Jan 2013 14:17:14 +0000 [thread overview]
Message-ID: <1357309041-6192-1-git-send-email-catalin.marinas@arm.com> (raw)
Hi,
That's the third version of the patch series adding support for the
ARMv8 RTSM model (vexpress-like) to the AArch64 kernel. There is no
SoC-specific code under arch/arm64/ as the kernel makes use of the
vexpress support already under drivers/ (apart from dts, defconfig and
some Kconfig changes).
The patches here can be found on this branch:
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64.git soc-armv8-experimental
In addition, there are two patches from Ryan and Tixy adding DT support
for CLCD, together with my patches for CLCD support on the ARMv8 RTSM
model (full, not the foundation one). My understanding is that Pawel
will push an updated patch for CLCD/DT support, so I won't worry about
it.
I'll push the arch/arm64/ patches myself but I expect the other patches
to go in via the arm-soc tree (sp810.h, vexpress clk/sysreg). I'll send
a pull request for the latter to arm-soc once Pawel is back from holiday
acks them.
Catalin
Catalin Marinas (6):
arm: Move sp810.h to include/linux/amba/
vexpress: Match the "arm,sp810" DT entry for clock initialisation
vexpress: Allow vexpress-sysreg to self-initialise
arm64: Populate the platform devices
arm64: Enable ARMv8 RTSM model (SoC) support
arm64: Add simple earlyprintk support
Pawel Moll (1):
arm64: Add dts files for the ARMv8 RTSM model
Documentation/arm64/memory.txt | 2 +
arch/arm/plat-spear/restart.c | 2 +-
arch/arm64/Kconfig | 12 +-
arch/arm64/Kconfig.debug | 9 +
arch/arm64/boot/dts/Makefile | 2 +
arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 154 ++++++++++++++
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 234 +++++++++++++++++++++
arch/arm64/boot/dts/skeleton.dtsi | 13 ++
arch/arm64/configs/vexpress_defconfig | 90 ++++++++
arch/arm64/include/asm/io.h | 3 +
arch/arm64/include/asm/memory.h | 1 +
arch/arm64/include/asm/mmu.h | 1 +
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/early_printk.c | 118 +++++++++++
arch/arm64/kernel/head.S | 12 +-
arch/arm64/kernel/setup.c | 8 +
arch/arm64/mm/mmu.c | 42 ++++
drivers/clk/versatile/clk-vexpress.c | 31 +--
drivers/mfd/vexpress-sysreg.c | 8 +-
drivers/net/ethernet/smsc/Kconfig | 4 +-
.../asm/hardware => include/linux/amba}/sp810.h | 0
include/linux/vexpress.h | 2 +-
22 files changed, 727 insertions(+), 22 deletions(-)
create mode 100644 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
create mode 100644 arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
create mode 100644 arch/arm64/boot/dts/skeleton.dtsi
create mode 100644 arch/arm64/configs/vexpress_defconfig
create mode 100644 arch/arm64/kernel/early_printk.c
rename {arch/arm/include/asm/hardware => include/linux/amba}/sp810.h (100%)
next reply other threads:[~2013-01-04 14:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 14:17 Catalin Marinas [this message]
2013-01-04 14:17 ` [PATCH v3 1/7] arm: Move sp810.h to include/linux/amba/ Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 2/7] vexpress: Match the "arm, sp810" DT entry for clock initialisation Catalin Marinas
2013-01-04 15:37 ` Christopher Covington
2013-01-04 15:48 ` Catalin Marinas
2013-01-08 17:29 ` Jon Medhurst (Tixy)
2013-01-09 11:36 ` Catalin Marinas
2013-01-09 11:50 ` Jon Medhurst (Tixy)
2013-01-09 14:49 ` Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 3/7] vexpress: Allow vexpress-sysreg to self-initialise Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 4/7] arm64: Populate the platform devices Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 5/7] arm64: Add dts files for the ARMv8 RTSM model Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 6/7] arm64: Enable ARMv8 RTSM model (SoC) support Catalin Marinas
2013-01-04 14:17 ` [PATCH v3 7/7] arm64: Add simple earlyprintk support Catalin Marinas
2013-01-04 14:46 ` [PATCH v3 0/7] arm64: ARMv8 RTSM model SoC support Arnd Bergmann
2013-01-04 16:16 ` Christopher Covington
2013-01-04 20:50 ` Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357309041-6192-1-git-send-email-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).