From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/11] ARM: nomadik: add FSMC NAND
Date: Mon, 7 Jan 2013 23:56:20 +0100 [thread overview]
Message-ID: <1357599380-7490-1-git-send-email-linus.walleij@linaro.org> (raw)
This adds the FSMC NAND driver and flash partitions to the Nomadik
device tree.
The only compatible string accepted by this driver is currently
"st,spear600-fsmc-nand" which is inappropriate for this system, so
this patch adds the compatible value "stericsson,fsmc-nand" as
well.
Cc: linux-mtd at vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I'm requesting an ACK from the MTD maintainers to be able to apply
this patch through the ARM SoC tree.
---
.../devicetree/bindings/mtd/fsmc-nand.txt | 2 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 38 ++++++++++++++++++++++
arch/arm/mach-nomadik/cpu-8815.c | 15 +++++++++
drivers/mtd/nand/fsmc_nand.c | 1 +
4 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index e3ea32e..2240ac0 100644
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -1,7 +1,7 @@
* FSMC NAND
Required properties:
-- compatible : "st,spear600-fsmc-nand"
+- compatible : "st,spear600-fsmc-nand", "stericsson,fsmc-nand"
- reg : Address range of the mtd chip
- reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 29986ea..8369eb0 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -32,6 +32,44 @@
interrupts = <5>;
};
+ /* A NAND flash of 128 MiB */
+ fsmc: flash at 40000000 {
+ compatible = "stericsson,fsmc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10100000 0x1000 /* FSMC Register*/
+ 0x40000000 0x2000 /* NAND Base DATA */
+ 0x41000000 0x2000 /* NAND Base ADDR */
+ 0x40800000 0x2000>; /* NAND Base CMD */
+ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+ status = "okay";
+
+ partition at 0 {
+ label = "X-Loader(NAND)";
+ reg = <0x0 0x40000>;
+ };
+ partition at 40000 {
+ label = "MemInit(NAND)";
+ reg = <0x40000 0x40000>;
+ };
+ partition at 80000 {
+ label = "BootLoader(NAND)";
+ reg = <0x80000 0x200000>;
+ };
+ partition at 280000 {
+ label = "Kernel zImage(NAND)";
+ reg = <0x280000 0x300000>;
+ };
+ partition at 580000 {
+ label = "Root Filesystem(NAND)";
+ reg = <0x580000 0x1600000>;
+ };
+ partition at 1b80000 {
+ label = "User Filesystem(NAND)";
+ reg = <0x1b80000 0x6480000>;
+ };
+ };
+
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 10b9f20..6bec72f 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -32,6 +32,7 @@
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/mtd/fsmc.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -262,6 +263,17 @@ struct sys_timer cpu8815_of_timer = {
.init = cpu8815_timer_init_of,
};
+static struct fsmc_nand_timings cpu8815_nand_timings = {
+ .thiz = 0,
+ .thold = 0x10,
+ .twait = 0x0A,
+ .tset = 0,
+};
+
+static struct fsmc_nand_platform_data cpu8815_nand_data = {
+ .nand_timings = &cpu8815_nand_timings,
+};
+
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
@@ -272,6 +284,9 @@ static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
"rng", NULL),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
"rtc-pl031", NULL),
+ OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
+ "fsmc-nand", &cpu8815_nand_data),
+
{ /* sentinel */ },
};
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1d74464..dda07c6 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -1218,6 +1218,7 @@ static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
#ifdef CONFIG_OF
static const struct of_device_id fsmc_nand_id_table[] = {
{ .compatible = "st,spear600-fsmc-nand" },
+ { .compatible = "stericsson,fsmc-nand" },
{}
};
MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
--
1.7.11.7
next reply other threads:[~2013-01-07 22:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-07 22:56 Linus Walleij [this message]
2013-01-08 10:08 ` [PATCH 05/11] ARM: nomadik: add FSMC NAND Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357599380-7490-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).