[RFC PATCH 1/5] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to system reset controller

[p.zabel@pengutronix.de (Philipp Zabel)]

Hi Stephen,

Am Mittwoch, den 09.01.2013, 11:15 -0700 schrieb Stephen Warren:
> On 01/09/2013 10:17 AM, Philipp Zabel wrote:
> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> >  .../devicetree/bindings/reset/fsl,imx-src.txt      |   45 ++++++++++++++++++++
> 
> I proposed something very similar a while back; it may be useful to look
> at the previous discussion there:
> 
> http://www.spinics.net/lists/arm-kernel/msg202451.html

Thanks, I had started playing around with some "reset subsystem"
patches, but so far shied away from what feels like a whole lot of code
for little effect. I came to the same conclusion that replacing gpio
resets would probably be overkill, but I was only peripherally aware of
the tegra reset controller.
So a simple common struct and some oftree parsing code in drivers/reset
that can replace both the proposed imx patch and what
tegra_periph_reset_* do would be considered useful?

> Unfortunately, I haven't had time to follow up on the proposal.

regards
Philipp