[kvmarm] [PATCH v5.1 0/2] KVM: ARM: Rename KVM_SET_DEVICE_ADDRESS

[scottwood@freescale.com (Scott Wood)]

On 01/10/2013 06:35:02 PM, Marcelo Tosatti wrote:
> On Thu, Jan 10, 2013 at 04:40:12PM -0600, Scott Wood wrote:
> > On 01/10/2013 04:28:01 PM, Marcelo Tosatti wrote:
> > >Or just have KVM_SET_PPC_DEVICE_ADDRESS. Is there a downside to  
> that?
> >
> > Besides the above, and my original complaint that it shouldn't be
> > specific to addresses?
> >
> > -Scott
> 
> I did not really grasp that ('shouldnt be specific to addresses'), but
> anyway.

A device may have other configuration parameters that need to be set,
besides addresses.  PPC MPIC will require information about the vendor
and version, for example.

> OK, can you write down your proposed improvements to the interface?
> In case you have something ready, otherwise there is time pressure
> to merge the ARM port.

My original request was just to change the name to something like
KVM_SET_DEVICE_CONFIG or KVM_SET_DEVICE_ATTR, and not make the id
encoding architecture-specific (preferably, separate into a "device id"
field and an "attribute id" field rather than using bitfields).  Actual
values for device id could be architecture-specific (or there could be a
global enumeration), and attribute id values would be device-specific.

Alex suggested that an ideal interface might accept values larger than  
64
bits, though I think it's good enough -- there are currently no proposed
uses that need more than 64 bits for a single attribute (unlike  
ONE_REG),
and if it is needed, such configuration could be split up between
multiple attributes, or the attribute could specify that "value" be a
userspace pointer to the actual data (as with ONE_REG).

Here's a writeup (the ARM details would go under ARM/vGIC-specific
documentation):

4.80 KVM_SET_DEVICE_ATTR

Capability: KVM_CAP_SET_DEVICE_ATTR
Type: vm ioctl
Parameters: struct kvm_device_attr (in)
Returns: 0 on success, -1 on error
Errors:
   ENODEV: The device id is unknown
   ENXIO:  Device not supported on current system
   Other errors may be returned by specific devices and attributes.

struct kvm_device_attr {
	__u32 device;
	__u32 attr;
	__u64 value;
};

Specify an attribute of a device emulated or directly exposed by the
kernel, which the host kernel needs to know about.  The device field is  
an
architecture-specific identifier for a specific device.  The attr field
is a device-specific identifier for a specific attribute.  Individual
attributes may have particular requirements for when they can and cannot
be set.

> That is, if you have interest/energy to spend in a possibly reusable
> interface, as long as that does not delay integration of the ARM code,
> i don't think the ARM people will mind that.

The impression I've been given is that just about any change will delay
the integration at this point.  If that's the case, and everyone's OK
with having an interface that is deprecated on arrival, then fine.

-Scott