From: mporter@ti.com (Matt Porter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 11/14] ARM: dts: add AM33XX MMC support
Date: Fri, 11 Jan 2013 00:48:47 -0500 [thread overview]
Message-ID: <1357883330-5364-12-git-send-email-mporter@ti.com> (raw)
In-Reply-To: <1357883330-5364-1-git-send-email-mporter@ti.com>
Adds AM33XX MMC support for am335x-bone, am335x-evm, and
am335x-evmsk..
Signed-off-by: Matt Porter <mporter@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 7 +++++++
arch/arm/boot/dts/am335x-evm.dts | 7 +++++++
arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++
arch/arm/boot/dts/am33xx.dtsi | 28 ++++++++++++++++++++++++++++
4 files changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 11b240c..a154ce0 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -120,6 +120,8 @@
};
ldo3_reg: regulator at 5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -136,3 +138,8 @@
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d649644..2907da6 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -232,6 +232,8 @@
};
vmmc_reg: regulator at 12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
@@ -244,3 +246,8 @@
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f5a6162..f050c46 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -244,7 +244,14 @@
};
vmmc_reg: regulator at 12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index e711ffb..278b75d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -235,6 +235,34 @@
status = "disabled";
};
+ mmc1: mmc at 48060000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mmc2: mmc at 481d8000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ dmas = <&edma 2
+ &edma 3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mmc3: mmc at 47810000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ status = "disabled";
+ };
+
wdt2: wdt at 44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
--
1.7.9.5
next prev parent reply other threads:[~2013-01-11 5:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 5:48 [PATCH v4 00/14] DMA Engine support for AM33XX Matt Porter
2013-01-11 5:48 ` [PATCH v4 01/14] ARM: davinci: move private EDMA API to arm/common Matt Porter
2013-01-11 6:15 ` Hebbar, Gururaja
2013-01-11 14:27 ` Matt Porter
2013-01-11 5:48 ` [PATCH v4 02/14] ARM: edma: remove unused transfer controller handlers Matt Porter
2013-01-11 5:48 ` [PATCH v4 03/14] ARM: edma: add AM33XX support to the private EDMA API Matt Porter
2013-01-11 18:14 ` [PATCH v4, " Lars Poeschel
[not found] ` <9fda86bbbec3444393fd5a2dc5135a5e@DFLE73.ent.ti.com>
2013-01-11 18:21 ` [PATCH v4,03/14] " Matt Porter
2013-01-11 5:48 ` [PATCH v4 04/14] dmaengine: edma: enable build for AM33XX Matt Porter
2013-01-11 5:48 ` [PATCH v4 05/14] dmaengine: edma: Add TI EDMA device tree binding Matt Porter
2013-01-11 7:54 ` Hebbar, Gururaja
[not found] ` <06e6ba0bd8984e1797c84d2926584909@DFLE72.ent.ti.com>
2013-01-11 14:30 ` Matt Porter
2013-01-11 5:48 ` [PATCH v4 06/14] ARM: dts: add AM33XX EDMA support Matt Porter
2013-01-11 5:48 ` [PATCH v4 07/14] dmaengine: add dma_request_slave_channel_compat() Matt Porter
2013-01-11 17:52 ` Tony Lindgren
2013-01-11 5:48 ` [PATCH v4 08/14] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat() Matt Porter
2013-01-11 17:52 ` Tony Lindgren
2013-01-11 5:48 ` [PATCH v4 09/14] mmc: omap_hsmmc: set max_segs based on dma engine limitations Matt Porter
2013-01-11 17:53 ` Tony Lindgren
2013-01-11 5:48 ` [PATCH v4 10/14] mmc: omap_hsmmc: add generic DMA request support to the DT binding Matt Porter
2013-01-11 17:54 ` Tony Lindgren
2013-01-11 5:48 ` Matt Porter [this message]
2013-01-11 17:55 ` [PATCH v4 11/14] ARM: dts: add AM33XX MMC support Tony Lindgren
2013-01-11 5:48 ` [PATCH v4 12/14] spi: omap2-mcspi: convert to dma_request_slave_channel_compat() Matt Porter
2013-01-11 5:48 ` [PATCH v4 13/14] spi: omap2-mcspi: add generic DMA request support to the DT binding Matt Porter
2013-01-11 5:48 ` [PATCH v4 14/14] ARM: dts: add AM33XX SPI DMA support Matt Porter
2013-01-11 11:40 ` [PATCH v4 00/14] DMA Engine support for AM33XX Arnd Bergmann
2013-01-11 18:33 ` Matt Porter
2013-01-11 20:12 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357883330-5364-12-git-send-email-mporter@ti.com \
--to=mporter@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).