From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 11 Jan 2013 13:13:00 +0000 Subject: [PATCH 12/18] power: ab8500_btemp: remove superfluous BTEMP thermal comp. In-Reply-To: <1357909986-9262-1-git-send-email-lee.jones@linaro.org> References: <1357909986-9262-1-git-send-email-lee.jones@linaro.org> Message-ID: <1357909986-9262-13-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Hakan Berg BTEMP thermal compensation factor times 10 is applied in two places, probe and get_property. Removed from probe. Signed-off-by: Lee Jones Signed-off-by: Hakan Berg Reviewed-by: Karl KOMIEROWSKI --- drivers/power/ab8500_btemp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 6f6a715..c882a9a 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -1030,8 +1030,8 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) ab8500_btemp_periodic_work); /* Set BTEMP thermal limits. Low and Med are fixed */ - di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT * 10; - di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT * 10; + di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; + di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BTEMP_HIGH_TH, &val); -- 1.7.9.5