From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: hw_breakpoint: Debug powerdown support for self-hosted debug
Date: Fri, 11 Jan 2013 15:28:58 +0000 [thread overview]
Message-ID: <1357918138-20222-4-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1357918138-20222-1-git-send-email-will.deacon@arm.com>
From: Dietmar Eggemann <dietmar.eggemann@arm.com>
This patch introduces debug powerdown support for self-hosted debug for v7
and v7.1 debug architecture for a SinglePower system, i.e. a system without a
separate core and debug power domain. On a SinglePower system the OS Lock is
lost over a powerdown.
If CONFIG_CPU_PM is set the new function pm_init() registers hw_breakpoint
with CPU PM for a system supporting OS Save and Restore.
Receiving a CPU PM EXIT notifier indicates that a single CPU has exited a low
power state. A call to reset_ctrl_regs() is hooked into the CPU PM EXIT
notifier chain. This function makes sure that the sticky power-down is clear
(only v7 debug), the OS Double Lock is clear (only v7.1 debug) and it clears
the OS Lock for v7 debug (for a system supporting OS Save and Restore) and
v7.1 debug. Furthermore, it clears any vector-catch events and all
breakpoint/watchpoint control/value registers for v7 and v7.1 debug.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
[will: removed redundant has_ossr check]
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm/kernel/hw_breakpoint.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 201d440..5eae53e 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -28,6 +28,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
@@ -1032,6 +1033,30 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
.notifier_call = dbg_reset_notify,
};
+#ifdef CONFIG_CPU_PM
+static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action,
+ void *v)
+{
+ if (action == CPU_PM_EXIT)
+ reset_ctrl_regs(NULL);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = {
+ .notifier_call = dbg_cpu_pm_notify,
+};
+
+static void __init pm_init(void)
+{
+ cpu_pm_register_notifier(&dbg_cpu_pm_nb);
+}
+#else
+static inline void pm_init(void)
+{
+}
+#endif
+
static int __init arch_hw_breakpoint_init(void)
{
debug_arch = get_debug_arch();
@@ -1081,8 +1106,9 @@ static int __init arch_hw_breakpoint_init(void)
hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
TRAP_HWBKPT, "breakpoint debug exception");
- /* Register hotplug notifier. */
+ /* Register hotplug and PM notifiers. */
register_cpu_notifier(&dbg_reset_nb);
+ pm_init();
return 0;
}
arch_initcall(arch_hw_breakpoint_init);
--
1.8.0
prev parent reply other threads:[~2013-01-11 15:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-11 15:28 [PATCH 0/3] hw_breakpoint updates for 3.9 Will Deacon
2013-01-11 15:28 ` [PATCH 1/3] ARM: coresight: common definition for (OS) Lock Access Register key value Will Deacon
2013-01-11 15:28 ` [PATCH 2/3] ARM: hw_breakpoint: Check function for OS Save and Restore mechanism Will Deacon
2013-01-11 15:28 ` Will Deacon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357918138-20222-4-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox