From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/26] mfd: ab8500-debugfs: Keep count of IRQs in debugfs
Date: Tue, 15 Jan 2013 12:55:51 +0000 [thread overview]
Message-ID: <1358254566-12419-12-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1358254566-12419-1-git-send-email-lee.jones@linaro.org>
From: Mattias Wallin <mattias.wallin@stericsson.com>
This patch adds a counter to the sysfs file dynamically created
by debugfs. It also fixes an array index error.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
---
drivers/mfd/ab8500-debugfs.c | 77 +++++++++++++++++++++++++++++-------------
1 file changed, 53 insertions(+), 24 deletions(-)
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index b3ddc23..03eacf1 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -23,6 +23,10 @@ static u32 debug_address;
static int irq_first;
static int irq_last;
+static u32 irq_count[AB8500_NR_IRQS];
+
+static struct device_attribute *dev_attr[AB8500_NR_IRQS];
+static char *event_name[AB8500_NR_IRQS];
/**
* struct ab8500_reg_range
@@ -364,12 +368,15 @@ static irqreturn_t ab8500_debug_handler(int irq, void *data)
{
char buf[16];
struct kobject *kobj = (struct kobject *)data;
+ unsigned int irq_abb = irq - irq_first;
+ if (irq_abb < AB8500_NR_IRQS)
+ irq_count[irq_abb]++;
/*
* This makes it possible to use poll for events (POLLPRI | POLLERR)
- * from userspace on sysfs file named irq-<nr>
+ * from userspace on sysfs file named <irq-nr>
*/
- sprintf(buf, "irq-%d", irq);
+ sprintf(buf, "%d", irq);
sysfs_notify(kobj, NULL, buf);
return IRQ_HANDLED;
@@ -555,19 +562,26 @@ static int ab8500_subscribe_unsubscribe_open(struct inode *inode,
}
/*
- * This function is used for all interrupts and will always print
- * the same string. It is however this file sysfs_notify called on.
- * Userspace should read this file and then poll. When an event occur
+ * Userspace should use poll() on this file. When an event occur
* the blocking poll will be released.
*/
static ssize_t show_irq(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "irq\n");
-}
+ unsigned long name;
+ unsigned int irq_index;
+ int err;
-static struct device_attribute *dev_attr[AB8500_NR_IRQS];
-static char *event_name[AB8500_NR_IRQS];
+ err = strict_strtoul(attr->attr.name, 0, &name);
+ if (err)
+ return err;
+
+ irq_index = name - irq_first;
+ if (irq_index >= AB8500_NR_IRQS)
+ return -EINVAL;
+ else
+ return sprintf(buf, "%u\n", irq_count[irq_index]);
+}
static ssize_t ab8500_subscribe_write(struct file *file,
const char __user *user_buf,
@@ -578,6 +592,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
int buf_size;
unsigned long user_val;
int err;
+ unsigned int irq_index;
/* Get userspace string and assure termination */
buf_size = min(count, (sizeof(buf)-1));
@@ -597,19 +612,23 @@ static ssize_t ab8500_subscribe_write(struct file *file,
return -EINVAL;
}
+ irq_index = user_val - irq_first;
+ if (irq_index >= AB8500_NR_IRQS)
+ return -EINVAL;
+
/*
- * This will create a sysfs file named irq-<nr> which userspace can
+ * This will create a sysfs file named <irq-nr> which userspace can
* use to select or poll and get the AB8500 events
*/
- dev_attr[user_val] = kmalloc(sizeof(struct device_attribute),
- GFP_KERNEL);
- event_name[user_val] = kmalloc(buf_size, GFP_KERNEL);
- sprintf(event_name[user_val], "irq-%lu", user_val);
- dev_attr[user_val]->show = show_irq;
- dev_attr[user_val]->store = NULL;
- dev_attr[user_val]->attr.name = event_name[user_val];
- dev_attr[user_val]->attr.mode = S_IRUGO;
- err = sysfs_create_file(&dev->kobj, &dev_attr[user_val]->attr);
+ dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute),
+ GFP_KERNEL);
+ event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL);
+ sprintf(event_name[irq_index], "%lu", user_val);
+ dev_attr[irq_index]->show = show_irq;
+ dev_attr[irq_index]->store = NULL;
+ dev_attr[irq_index]->attr.name = event_name[irq_index];
+ dev_attr[irq_index]->attr.mode = S_IRUGO;
+ err = sysfs_create_file(&dev->kobj, &dev_attr[irq_index]->attr);
if (err < 0) {
printk(KERN_ERR "sysfs_create_file failed %d\n", err);
return err;
@@ -621,6 +640,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
if (err < 0) {
printk(KERN_ERR "request_threaded_irq failed %d, %lu\n",
err, user_val);
+ sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr);
return err;
}
@@ -636,6 +656,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
int buf_size;
unsigned long user_val;
int err;
+ unsigned int irq_index;
/* Get userspace string and assure termination */
buf_size = min(count, (sizeof(buf)-1));
@@ -655,12 +676,20 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
return -EINVAL;
}
- free_irq(user_val, &dev->kobj);
- kfree(event_name[user_val]);
- kfree(dev_attr[user_val]);
+ irq_index = user_val - irq_first;
+ if (irq_index >= AB8500_NR_IRQS)
+ return -EINVAL;
+
+ /* Set irq count to 0 when unsubscribe */
+ irq_count[irq_index] = 0;
+
+ if (dev_attr[irq_index])
+ sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr);
- if (dev_attr[user_val])
- sysfs_remove_file(&dev->kobj, &dev_attr[user_val]->attr);
+
+ free_irq(user_val, &dev->kobj);
+ kfree(event_name[irq_index]);
+ kfree(dev_attr[irq_index]);
return buf_size;
}
--
1.7.9.5
next prev parent reply other threads:[~2013-01-15 12:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-15 12:55 [PATCH 00/26] AB8500 MFD overhaul Lee Jones
2013-01-15 12:55 ` [PATCH 01/26] mfd: ab8500-sysctrl: Provide a platform specific pm_power_off() call-back Lee Jones
2013-01-15 12:55 ` [PATCH 02/26] mfd: ab8500-sysctrl: If a charger is present, reboot instead Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:44 ` Lee Jones
2013-01-15 12:55 ` [PATCH 03/26] mfd: ab8500-sysctrl: Only reboot into charging mode if battery type is known Lee Jones
2013-01-15 12:55 ` [PATCH 04/26] mfd: ab8500-sysctrl.c: Provide charging as reset reason Lee Jones
2013-01-15 12:55 ` [PATCH 05/26] mfd: ab8500-gpadc: Change to mdelay for greater resolution Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:43 ` Lee Jones
2013-01-15 12:55 ` [PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:38 ` Lee Jones
2013-02-03 17:02 ` Samuel Ortiz
2013-01-15 12:55 ` [PATCH 07/26] mfd: ab8500-sysctrl: export read/write symbols Lee Jones
2013-01-15 12:55 ` [PATCH 08/26] mfd: abx500-core: Provide an API to dump all ABx500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 09/26] mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:25 ` Lee Jones
2013-01-28 10:22 ` Lee Jones
2013-01-28 10:49 ` Samuel Ortiz
2013-01-28 11:34 ` Lee Jones
2013-02-03 17:01 ` Samuel Ortiz
2013-02-04 9:27 ` Lee Jones
2013-01-15 12:55 ` [PATCH 10/26] mfd: ab8500-debugfs: Wake-up device on debugfs IRQ Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:49 ` Lee Jones
2013-01-15 12:55 ` Lee Jones [this message]
2013-01-15 12:55 ` [PATCH 12/26] mfd: ab8500-debugfs: Use NULL to initialise remaining NULL pointer Lee Jones
2013-01-15 13:06 ` Mark Brown
2013-01-15 13:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 13/26] mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:47 ` Lee Jones
2013-01-15 12:55 ` [PATCH 14/26] mfd: ab8500-debugfs: Fix introduced compiler time warnings Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:55 ` [PATCH 15/26] mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Lee Jones
2013-01-15 12:55 ` [PATCH 16/26] mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 Lee Jones
2013-01-15 12:55 ` [PATCH 17/26] mfd: ab8500-debugfs: add debugfs node to read all registers Lee Jones
2013-01-15 12:55 ` [PATCH 18/26] mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 19/26] mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically Lee Jones
2013-01-15 12:56 ` [PATCH 20/26] mfd ab8500-gpadc: Introduce new AB version detection Lee Jones
2013-01-15 12:56 ` [PATCH 21/26] mfd: ab8500-debugfs: Add interrupt debug Lee Jones
2013-01-15 12:56 ` [PATCH 22/26] mfd: ab8500-gpadc: Add runtime pm support Lee Jones
2013-01-15 12:56 ` [PATCH 23/26] mfd: ab8500-pwm: Enable support for AB8505 PWMLED blink Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:13 ` Lee Jones
2013-01-15 12:56 ` [PATCH 24/26] mfd: ab8500-debugfs: sizeof() mismatch bugfix Lee Jones
2013-01-15 12:56 ` [PATCH 25/26] mfd: ab8500-gpadc: Reduce conversion timeout Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:56 ` [PATCH 26/26] mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter Lee Jones
2013-01-27 23:54 ` Samuel Ortiz
2013-01-28 8:11 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358254566-12419-12-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).