From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/26] mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes
Date: Tue, 15 Jan 2013 12:55:55 +0000 [thread overview]
Message-ID: <1358254566-12419-16-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1358254566-12419-1-git-send-email-lee.jones@linaro.org>
From: John Beckett <john.beckett@stericsson.com>
Allow a user to take a glimpse into the inner workings of the
AB8500 Analogue-to-Digital Converters, via debugfs.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: John Beckett <john.beckett@stericsson.com>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
---
drivers/mfd/ab8500-debugfs.c | 486 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 465 insertions(+), 21 deletions(-)
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 7698d30..aedbcb0 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -82,7 +82,7 @@
#include <linux/slab.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
#ifdef CONFIG_DEBUG_FS
#include <linux/string.h>
@@ -143,6 +143,7 @@ static struct hwreg_cfg hwreg_cfg = {
};
#define AB8500_NAME_STRING "ab8500"
+#define AB8500_ADC_NAME_STRING "gpadc"
#define AB8500_NUM_BANKS 22
#define AB8500_REV_REG 0x80
@@ -672,6 +673,382 @@ static int ab8500_hwreg_open(struct inode *inode, struct file *file)
return single_open(file, ab8500_hwreg_print, inode->i_private);
}
+static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
+{
+ int bat_ctrl_raw;
+ int bat_ctrl_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL);
+ bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ BAT_CTRL, bat_ctrl_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ bat_ctrl_convert, bat_ctrl_raw);
+}
+
+static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_bat_ctrl_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_bat_ctrl_fops = {
+ .open = ab8500_gpadc_bat_ctrl_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p)
+{
+ int btemp_ball_raw;
+ int btemp_ball_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL);
+ btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
+ btemp_ball_raw);
+
+ return seq_printf(s,
+ "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
+}
+
+static int ab8500_gpadc_btemp_ball_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_btemp_ball_fops = {
+ .open = ab8500_gpadc_btemp_ball_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p)
+{
+ int main_charger_v_raw;
+ int main_charger_v_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V);
+ main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ MAIN_CHARGER_V, main_charger_v_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ main_charger_v_convert, main_charger_v_raw);
+}
+
+static int ab8500_gpadc_main_charger_v_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_main_charger_v_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_charger_v_fops = {
+ .open = ab8500_gpadc_main_charger_v_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p)
+{
+ int acc_detect1_raw;
+ int acc_detect1_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1);
+ acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
+ acc_detect1_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ acc_detect1_convert, acc_detect1_raw);
+}
+
+static int ab8500_gpadc_acc_detect1_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_acc_detect1_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_acc_detect1_fops = {
+ .open = ab8500_gpadc_acc_detect1_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p)
+{
+ int acc_detect2_raw;
+ int acc_detect2_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2);
+ acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ ACC_DETECT2, acc_detect2_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ acc_detect2_convert, acc_detect2_raw);
+}
+
+static int ab8500_gpadc_acc_detect2_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_acc_detect2_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_acc_detect2_fops = {
+ .open = ab8500_gpadc_acc_detect2_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p)
+{
+ int aux1_raw;
+ int aux1_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1);
+ aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
+ aux1_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ aux1_convert, aux1_raw);
+}
+
+static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_aux1_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_aux1_fops = {
+ .open = ab8500_gpadc_aux1_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p)
+{
+ int aux2_raw;
+ int aux2_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2);
+ aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
+ aux2_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ aux2_convert, aux2_raw);
+}
+
+static int ab8500_gpadc_aux2_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_aux2_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_aux2_fops = {
+ .open = ab8500_gpadc_aux2_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p)
+{
+ int main_bat_v_raw;
+ int main_bat_v_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V);
+ main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
+ main_bat_v_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ main_bat_v_convert, main_bat_v_raw);
+}
+
+static int ab8500_gpadc_main_bat_v_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_bat_v_fops = {
+ .open = ab8500_gpadc_main_bat_v_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p)
+{
+ int vbus_v_raw;
+ int vbus_v_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V);
+ vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
+ vbus_v_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ vbus_v_convert, vbus_v_raw);
+}
+
+static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_vbus_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_vbus_v_fops = {
+ .open = ab8500_gpadc_vbus_v_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p)
+{
+ int main_charger_c_raw;
+ int main_charger_c_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C);
+ main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ MAIN_CHARGER_C, main_charger_c_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ main_charger_c_convert, main_charger_c_raw);
+}
+
+static int ab8500_gpadc_main_charger_c_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_main_charger_c_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_charger_c_fops = {
+ .open = ab8500_gpadc_main_charger_c_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p)
+{
+ int usb_charger_c_raw;
+ int usb_charger_c_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C);
+ usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ USB_CHARGER_C, usb_charger_c_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ usb_charger_c_convert, usb_charger_c_raw);
+}
+
+static int ab8500_gpadc_usb_charger_c_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ab8500_gpadc_usb_charger_c_print,
+ inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_usb_charger_c_fops = {
+ .open = ab8500_gpadc_usb_charger_c_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p)
+{
+ int bk_bat_v_raw;
+ int bk_bat_v_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V);
+ bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+ BK_BAT_V, bk_bat_v_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ bk_bat_v_convert, bk_bat_v_raw);
+}
+
+static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_bk_bat_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_bk_bat_v_fops = {
+ .open = ab8500_gpadc_bk_bat_v_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p)
+{
+ int die_temp_raw;
+ int die_temp_convert;
+ struct ab8500_gpadc *gpadc;
+
+ gpadc = ab8500_gpadc_get();
+ die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP);
+ die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
+ die_temp_raw);
+
+ return seq_printf(s, "%d,0x%X\n",
+ die_temp_convert, die_temp_raw);
+}
+
+static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_gpadc_die_temp_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_die_temp_fops = {
+ .open = ab8500_gpadc_die_temp_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
/*
* return length of an ASCII numerical value, 0 is string is not a
* numerical value.
@@ -1040,6 +1417,7 @@ static const struct file_operations ab8500_hwreg_fops = {
};
static struct dentry *ab8500_dir;
+static struct dentry *ab8500_gpadc_dir;
static int __devinit ab8500_debug_probe(struct platform_device *plf)
{
@@ -1050,14 +1428,14 @@ static int __devinit ab8500_debug_probe(struct platform_device *plf)
irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
if (irq_first < 0) {
dev_err(&plf->dev, "First irq not found, err %d\n",
- irq_first);
+ irq_first);
return irq_first;
}
irq_last = platform_get_irq_byname(plf, "IRQ_LAST");
if (irq_last < 0) {
dev_err(&plf->dev, "Last irq not found, err %d\n",
- irq_last);
+ irq_last);
return irq_last;
}
@@ -1065,42 +1443,108 @@ static int __devinit ab8500_debug_probe(struct platform_device *plf)
if (!ab8500_dir)
goto err;
- file = debugfs_create_file("all-bank-registers",
- S_IRUGO, ab8500_dir, &plf->dev, &ab8500_registers_fops);
+ ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
+ ab8500_dir);
+ if (!ab8500_gpadc_dir)
+ goto err;
+
+ file = debugfs_create_file("all-bank-registers", S_IRUGO,
+ ab8500_dir, &plf->dev, &ab8500_registers_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_bank_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_address_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_val_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR),
+ ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
+ if (!file)
+ goto err;
+
+ file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-bank",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_bank_fops);
+ file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-address",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev,
- &ab8500_address_fops);
+ file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
if (!file)
goto err;
- file = debugfs_create_file("register-value",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_val_fops);
+ file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
if (!file)
goto err;
- file = debugfs_create_file("irq-subscribe",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev,
- &ab8500_subscribe_fops);
+ file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
if (!file)
goto err;
- file = debugfs_create_file("irq-unsubscribe",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev,
- &ab8500_unsubscribe_fops);
+ file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
if (!file)
goto err;
- file = debugfs_create_file("hwreg",
- (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev,
- &ab8500_hwreg_fops);
+ file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR),
+ ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
if (!file)
goto err;
--
1.7.9.5
next prev parent reply other threads:[~2013-01-15 12:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-15 12:55 [PATCH 00/26] AB8500 MFD overhaul Lee Jones
2013-01-15 12:55 ` [PATCH 01/26] mfd: ab8500-sysctrl: Provide a platform specific pm_power_off() call-back Lee Jones
2013-01-15 12:55 ` [PATCH 02/26] mfd: ab8500-sysctrl: If a charger is present, reboot instead Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:44 ` Lee Jones
2013-01-15 12:55 ` [PATCH 03/26] mfd: ab8500-sysctrl: Only reboot into charging mode if battery type is known Lee Jones
2013-01-15 12:55 ` [PATCH 04/26] mfd: ab8500-sysctrl.c: Provide charging as reset reason Lee Jones
2013-01-15 12:55 ` [PATCH 05/26] mfd: ab8500-gpadc: Change to mdelay for greater resolution Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:43 ` Lee Jones
2013-01-15 12:55 ` [PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:38 ` Lee Jones
2013-02-03 17:02 ` Samuel Ortiz
2013-01-15 12:55 ` [PATCH 07/26] mfd: ab8500-sysctrl: export read/write symbols Lee Jones
2013-01-15 12:55 ` [PATCH 08/26] mfd: abx500-core: Provide an API to dump all ABx500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 09/26] mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:25 ` Lee Jones
2013-01-28 10:22 ` Lee Jones
2013-01-28 10:49 ` Samuel Ortiz
2013-01-28 11:34 ` Lee Jones
2013-02-03 17:01 ` Samuel Ortiz
2013-02-04 9:27 ` Lee Jones
2013-01-15 12:55 ` [PATCH 10/26] mfd: ab8500-debugfs: Wake-up device on debugfs IRQ Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 11/26] mfd: ab8500-debugfs: Keep count of IRQs in debugfs Lee Jones
2013-01-15 12:55 ` [PATCH 12/26] mfd: ab8500-debugfs: Use NULL to initialise remaining NULL pointer Lee Jones
2013-01-15 13:06 ` Mark Brown
2013-01-15 13:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 13/26] mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:47 ` Lee Jones
2013-01-15 12:55 ` [PATCH 14/26] mfd: ab8500-debugfs: Fix introduced compiler time warnings Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:55 ` Lee Jones [this message]
2013-01-15 12:55 ` [PATCH 16/26] mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 Lee Jones
2013-01-15 12:55 ` [PATCH 17/26] mfd: ab8500-debugfs: add debugfs node to read all registers Lee Jones
2013-01-15 12:55 ` [PATCH 18/26] mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 19/26] mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically Lee Jones
2013-01-15 12:56 ` [PATCH 20/26] mfd ab8500-gpadc: Introduce new AB version detection Lee Jones
2013-01-15 12:56 ` [PATCH 21/26] mfd: ab8500-debugfs: Add interrupt debug Lee Jones
2013-01-15 12:56 ` [PATCH 22/26] mfd: ab8500-gpadc: Add runtime pm support Lee Jones
2013-01-15 12:56 ` [PATCH 23/26] mfd: ab8500-pwm: Enable support for AB8505 PWMLED blink Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:13 ` Lee Jones
2013-01-15 12:56 ` [PATCH 24/26] mfd: ab8500-debugfs: sizeof() mismatch bugfix Lee Jones
2013-01-15 12:56 ` [PATCH 25/26] mfd: ab8500-gpadc: Reduce conversion timeout Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:56 ` [PATCH 26/26] mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter Lee Jones
2013-01-27 23:54 ` Samuel Ortiz
2013-01-28 8:11 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358254566-12419-16-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).