From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/26] mfd: ab8500-debugfs: add debugfs node to read all registers
Date: Tue, 15 Jan 2013 12:55:57 +0000 [thread overview]
Message-ID: <1358254566-12419-18-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1358254566-12419-1-git-send-email-lee.jones@linaro.org>
From: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Update the ab8500_registers_print() to reuse it from multiple places.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
---
drivers/mfd/ab8500-debugfs.c | 95 +++++++++++++++++++++++++++++++++++-------
1 file changed, 81 insertions(+), 14 deletions(-)
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index a231faf..a1ce55e 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -495,15 +495,12 @@ static irqreturn_t ab8500_debug_handler(int irq, void *data)
return IRQ_HANDLED;
}
-static int ab8500_registers_print(struct seq_file *s, void *p)
+/* Prints to seq_file or log_buf */
+static int ab8500_registers_print(struct device *dev, u32 bank,
+ struct seq_file *s)
{
- struct device *dev = s->private;
unsigned int i;
- u32 bank = debug_bank;
-
- seq_printf(s, AB8500_NAME_STRING " register values:\n");
- seq_printf(s, " bank %u:\n", bank);
for (i = 0; i < debug_ranges[bank].num_ranges; i++) {
u32 reg;
@@ -520,22 +517,42 @@ static int ab8500_registers_print(struct seq_file *s, void *p)
return err;
}
- err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", bank,
- reg, value);
- if (err < 0) {
- dev_err(dev, "seq_printf overflow\n");
- /* Error is not returned here since
- * the output is wanted in any case */
- return 0;
+ if (s) {
+ err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n",
+ bank, reg, value);
+ if (err < 0) {
+ dev_err(dev,
+ "seq_printf overflow bank=%d reg=%d\n",
+ bank, reg);
+ /* Error is not returned here since
+ * the output is wanted in any case */
+ return 0;
+ }
+ } else {
+ printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank,
+ reg, value);
}
}
}
return 0;
}
+static int ab8500_print_bank_registers(struct seq_file *s, void *p)
+{
+ struct device *dev = s->private;
+ u32 bank = debug_bank;
+
+ seq_printf(s, AB8500_NAME_STRING " register values:\n");
+
+ seq_printf(s, " bank %u:\n", bank);
+
+ ab8500_registers_print(dev, bank, s);
+ return 0;
+}
+
static int ab8500_registers_open(struct inode *inode, struct file *file)
{
- return single_open(file, ab8500_registers_print, inode->i_private);
+ return single_open(file, ab8500_print_bank_registers, inode->i_private);
}
static const struct file_operations ab8500_registers_fops = {
@@ -546,6 +563,51 @@ static const struct file_operations ab8500_registers_fops = {
.owner = THIS_MODULE,
};
+static int ab8500_print_all_banks(struct seq_file *s, void *p)
+{
+ struct device *dev = s->private;
+ unsigned int i;
+ int err;
+
+ seq_printf(s, AB8500_NAME_STRING " register values:\n");
+
+ for (i = 1; i < AB8500_NUM_BANKS; i++) {
+ err = seq_printf(s, " bank %u:\n", i);
+ if (err < 0)
+ dev_err(dev, "seq_printf overflow, bank=%d\n", i);
+
+ ab8500_registers_print(dev, i, s);
+ }
+ return 0;
+}
+
+static int ab8500_all_banks_open(struct inode *inode, struct file *file)
+{
+ struct seq_file *s;
+ int err;
+
+ err = single_open(file, ab8500_print_all_banks, inode->i_private);
+ if (!err) {
+ /* Default buf size in seq_read is not enough */
+ s = (struct seq_file *)file->private_data;
+ s->size = (PAGE_SIZE * 2);
+ s->buf = kmalloc(s->size, GFP_KERNEL);
+ if (!s->buf) {
+ single_release(inode, file);
+ err = -ENOMEM;
+ }
+ }
+ return err;
+}
+
+static const struct file_operations ab8500_all_banks_fops = {
+ .open = ab8500_all_banks_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
static int ab8500_bank_print(struct seq_file *s, void *p)
{
return seq_printf(s, "%d\n", debug_bank);
@@ -1475,6 +1537,11 @@ static int __devinit ab8500_debug_probe(struct platform_device *plf)
if (!file)
goto err;
+ file = debugfs_create_file("all-banks", S_IRUGO,
+ ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
+ if (!file)
+ goto err;
+
file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR),
ab8500_dir, &plf->dev, &ab8500_bank_fops);
if (!file)
--
1.7.9.5
next prev parent reply other threads:[~2013-01-15 12:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-15 12:55 [PATCH 00/26] AB8500 MFD overhaul Lee Jones
2013-01-15 12:55 ` [PATCH 01/26] mfd: ab8500-sysctrl: Provide a platform specific pm_power_off() call-back Lee Jones
2013-01-15 12:55 ` [PATCH 02/26] mfd: ab8500-sysctrl: If a charger is present, reboot instead Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:44 ` Lee Jones
2013-01-15 12:55 ` [PATCH 03/26] mfd: ab8500-sysctrl: Only reboot into charging mode if battery type is known Lee Jones
2013-01-15 12:55 ` [PATCH 04/26] mfd: ab8500-sysctrl.c: Provide charging as reset reason Lee Jones
2013-01-15 12:55 ` [PATCH 05/26] mfd: ab8500-gpadc: Change to mdelay for greater resolution Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:43 ` Lee Jones
2013-01-15 12:55 ` [PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:38 ` Lee Jones
2013-02-03 17:02 ` Samuel Ortiz
2013-01-15 12:55 ` [PATCH 07/26] mfd: ab8500-sysctrl: export read/write symbols Lee Jones
2013-01-15 12:55 ` [PATCH 08/26] mfd: abx500-core: Provide an API to dump all ABx500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 09/26] mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:25 ` Lee Jones
2013-01-28 10:22 ` Lee Jones
2013-01-28 10:49 ` Samuel Ortiz
2013-01-28 11:34 ` Lee Jones
2013-02-03 17:01 ` Samuel Ortiz
2013-02-04 9:27 ` Lee Jones
2013-01-15 12:55 ` [PATCH 10/26] mfd: ab8500-debugfs: Wake-up device on debugfs IRQ Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 11/26] mfd: ab8500-debugfs: Keep count of IRQs in debugfs Lee Jones
2013-01-15 12:55 ` [PATCH 12/26] mfd: ab8500-debugfs: Use NULL to initialise remaining NULL pointer Lee Jones
2013-01-15 13:06 ` Mark Brown
2013-01-15 13:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 13/26] mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:47 ` Lee Jones
2013-01-15 12:55 ` [PATCH 14/26] mfd: ab8500-debugfs: Fix introduced compiler time warnings Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:55 ` [PATCH 15/26] mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Lee Jones
2013-01-15 12:55 ` [PATCH 16/26] mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 Lee Jones
2013-01-15 12:55 ` Lee Jones [this message]
2013-01-15 12:55 ` [PATCH 18/26] mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 19/26] mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically Lee Jones
2013-01-15 12:56 ` [PATCH 20/26] mfd ab8500-gpadc: Introduce new AB version detection Lee Jones
2013-01-15 12:56 ` [PATCH 21/26] mfd: ab8500-debugfs: Add interrupt debug Lee Jones
2013-01-15 12:56 ` [PATCH 22/26] mfd: ab8500-gpadc: Add runtime pm support Lee Jones
2013-01-15 12:56 ` [PATCH 23/26] mfd: ab8500-pwm: Enable support for AB8505 PWMLED blink Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:13 ` Lee Jones
2013-01-15 12:56 ` [PATCH 24/26] mfd: ab8500-debugfs: sizeof() mismatch bugfix Lee Jones
2013-01-15 12:56 ` [PATCH 25/26] mfd: ab8500-gpadc: Reduce conversion timeout Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:56 ` [PATCH 26/26] mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter Lee Jones
2013-01-27 23:54 ` Samuel Ortiz
2013-01-28 8:11 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358254566-12419-18-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).