From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 21/26] mfd: ab8500-debugfs: Add interrupt debug
Date: Tue, 15 Jan 2013 12:56:01 +0000 [thread overview]
Message-ID: <1358254566-12419-22-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1358254566-12419-1-git-send-email-lee.jones@linaro.org>
From: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
This patch adds an entry in debugfs to check number of interrupts
from the AB.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
---
drivers/mfd/ab8500-core.c | 1 +
drivers/mfd/ab8500-debugfs.c | 49 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/abx500/ab8500.h | 2 ++
3 files changed, 52 insertions(+)
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 0f84fc0..580adf3 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -521,6 +521,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
int virq = ab8500_irq_get_virq(ab8500, line);
handle_nested_irq(virq);
+ ab8500_debug_register_interrupt(line);
value &= ~(1 << bit);
} while (value);
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index d23b6cc..8e405af 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -737,6 +737,35 @@ static ssize_t ab8500_val_write(struct file *file,
}
/*
+ * Interrupt status
+ */
+static u32 num_interrupts[AB8500_MAX_NR_IRQS];
+static int num_interrupt_lines;
+
+void ab8500_debug_register_interrupt(int line)
+{
+ if (line < num_interrupt_lines)
+ num_interrupts[line]++;
+}
+
+static int ab8500_interrupts_print(struct seq_file *s, void *p)
+{
+ int line;
+
+ seq_printf(s, "irq: number of\n");
+
+ for (line = 0; line < num_interrupt_lines; line++)
+ seq_printf(s, "%3i: %6i\n", line, num_interrupts[line]);
+
+ return 0;
+}
+
+static int ab8500_interrupts_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab8500_interrupts_print, inode->i_private);
+}
+
+/*
* - HWREG DB8500 formated routines
*/
static int ab8500_hwreg_print(struct seq_file *s, void *d)
@@ -1487,6 +1516,14 @@ static const struct file_operations ab8500_val_fops = {
.owner = THIS_MODULE,
};
+static const struct file_operations ab8500_interrupts_fops = {
+ .open = ab8500_interrupts_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
static const struct file_operations ab8500_subscribe_fops = {
.open = ab8500_subscribe_unsubscribe_open,
.write = ab8500_subscribe_write,
@@ -1595,6 +1632,18 @@ static int __devinit ab8500_debug_probe(struct platform_device *plf)
if (!file)
goto err;
+ if (is_ab8500(ab8500))
+ num_interrupt_lines = AB8500_NR_IRQS;
+ else if (is_ab8505(ab8500))
+ num_interrupt_lines = AB8505_NR_IRQS;
+ else if (is_ab9540(ab8500))
+ num_interrupt_lines = AB9540_NR_IRQS;
+
+ file = debugfs_create_file("interrupts", (S_IRUGO),
+ ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
+ if (!file)
+ goto err;
+
file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR),
ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
if (!file)
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 4c8d966..83de910 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -347,8 +347,10 @@ static inline int is_ab8500_2p0(struct ab8500 *ab)
#ifdef CONFIG_AB8500_DEBUG
void ab8500_dump_all_banks(struct device *dev);
+void ab8500_debug_register_interrupt(int line);
#else
static inline void ab8500_dump_all_banks(struct device *dev) {}
+static inline void ab8500_debug_register_interrupt(int line) {}
#endif
#endif /* MFD_AB8500_H */
--
1.7.9.5
next prev parent reply other threads:[~2013-01-15 12:56 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-15 12:55 [PATCH 00/26] AB8500 MFD overhaul Lee Jones
2013-01-15 12:55 ` [PATCH 01/26] mfd: ab8500-sysctrl: Provide a platform specific pm_power_off() call-back Lee Jones
2013-01-15 12:55 ` [PATCH 02/26] mfd: ab8500-sysctrl: If a charger is present, reboot instead Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:44 ` Lee Jones
2013-01-15 12:55 ` [PATCH 03/26] mfd: ab8500-sysctrl: Only reboot into charging mode if battery type is known Lee Jones
2013-01-15 12:55 ` [PATCH 04/26] mfd: ab8500-sysctrl.c: Provide charging as reset reason Lee Jones
2013-01-15 12:55 ` [PATCH 05/26] mfd: ab8500-gpadc: Change to mdelay for greater resolution Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:43 ` Lee Jones
2013-01-15 12:55 ` [PATCH 06/26] mfd: ab8500-sysctrl: Provide configuration for SysClkReqRfClkBuf registers Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:38 ` Lee Jones
2013-02-03 17:02 ` Samuel Ortiz
2013-01-15 12:55 ` [PATCH 07/26] mfd: ab8500-sysctrl: export read/write symbols Lee Jones
2013-01-15 12:55 ` [PATCH 08/26] mfd: abx500-core: Provide an API to dump all ABx500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 09/26] mfd: ab8500-debugfs: Provide a means for a user subscribe to IRQs Lee Jones
2013-01-27 23:52 ` Samuel Ortiz
2013-01-28 8:25 ` Lee Jones
2013-01-28 10:22 ` Lee Jones
2013-01-28 10:49 ` Samuel Ortiz
2013-01-28 11:34 ` Lee Jones
2013-02-03 17:01 ` Samuel Ortiz
2013-02-04 9:27 ` Lee Jones
2013-01-15 12:55 ` [PATCH 10/26] mfd: ab8500-debugfs: Wake-up device on debugfs IRQ Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 11/26] mfd: ab8500-debugfs: Keep count of IRQs in debugfs Lee Jones
2013-01-15 12:55 ` [PATCH 12/26] mfd: ab8500-debugfs: Use NULL to initialise remaining NULL pointer Lee Jones
2013-01-15 13:06 ` Mark Brown
2013-01-15 13:49 ` Lee Jones
2013-01-15 12:55 ` [PATCH 13/26] mfd: ab8500-debugfs: Formated access AB8500 registers from debugfs entry Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:47 ` Lee Jones
2013-01-15 12:55 ` [PATCH 14/26] mfd: ab8500-debugfs: Fix introduced compiler time warnings Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:55 ` [PATCH 15/26] mfd: ab8500-debugfs: Export all AB8500 ADCs as debugfs nodes Lee Jones
2013-01-15 12:55 ` [PATCH 16/26] mfd: ab8500-debugfs: Set the USB charging current to 300mA for ABV3 Lee Jones
2013-01-15 12:55 ` [PATCH 17/26] mfd: ab8500-debugfs: add debugfs node to read all registers Lee Jones
2013-01-15 12:55 ` [PATCH 18/26] mfd: ab8500-core: Allow the possibility to dump all AB8500 registers Lee Jones
2013-01-15 12:55 ` [PATCH 19/26] mfd: ab8500-debugfs: Allow number of IRQs to be provided more dynamically Lee Jones
2013-01-15 12:56 ` [PATCH 20/26] mfd ab8500-gpadc: Introduce new AB version detection Lee Jones
2013-01-15 12:56 ` Lee Jones [this message]
2013-01-15 12:56 ` [PATCH 22/26] mfd: ab8500-gpadc: Add runtime pm support Lee Jones
2013-01-15 12:56 ` [PATCH 23/26] mfd: ab8500-pwm: Enable support for AB8505 PWMLED blink Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:13 ` Lee Jones
2013-01-15 12:56 ` [PATCH 24/26] mfd: ab8500-debugfs: sizeof() mismatch bugfix Lee Jones
2013-01-15 12:56 ` [PATCH 25/26] mfd: ab8500-gpadc: Reduce conversion timeout Lee Jones
2013-01-27 23:53 ` Samuel Ortiz
2013-01-28 8:45 ` Lee Jones
2013-01-15 12:56 ` [PATCH 26/26] mfd: ab8500-gpadc: Use new ab8500_gpadc_get() with name parameter Lee Jones
2013-01-27 23:54 ` Samuel Ortiz
2013-01-28 8:11 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358254566-12419-22-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).