From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] mmc: mvsdio: use devm_ API to simplify/correct error paths.
Date: Wed, 16 Jan 2013 14:13:56 +0100 [thread overview]
Message-ID: <1358342040-7130-2-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1358342040-7130-1-git-send-email-andrew@lunn.ch>
There are a number of bugs in the error paths of this driver. Make
use of devm_ functions to simplify the cleanup on error.
Based on a patch by Russell King.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/mmc/host/mvsdio.c | 92 +++++++++++++++------------------------------
1 file changed, 30 insertions(+), 62 deletions(-)
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index de4c20b..f8dd361 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -50,8 +50,6 @@ struct mvsd_host {
struct timer_list timer;
struct mmc_host *mmc;
struct device *dev;
- struct resource *res;
- int irq;
struct clk *clk;
int gpio_card_detect;
int gpio_write_protect;
@@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
if (!r || irq < 0 || !mvsd_data)
return -ENXIO;
- r = request_mem_region(r->start, SZ_1K, DRIVER_NAME);
- if (!r)
- return -EBUSY;
-
mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
@@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev)
host = mmc_priv(mmc);
host->mmc = mmc;
host->dev = &pdev->dev;
- host->res = r;
host->base_clock = mvsd_data->clock / 2;
+ host->clk = ERR_PTR(-EINVAL);
mmc->ops = &mvsd_ops;
@@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
spin_lock_init(&host->lock);
- host->base = ioremap(r->start, SZ_4K);
+ host->base = devm_request_and_ioremap(&pdev->dev, r);
if (!host->base) {
ret = -ENOMEM;
goto out;
@@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev)
mvsd_power_down(host);
- ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host);
+ ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host);
if (ret) {
pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
goto out;
- } else
- host->irq = irq;
+ }
/* Not all platforms can gate the clock, so it is not
an error if the clock does not exists. */
- host->clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(host->clk)) {
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(host->clk))
clk_prepare_enable(host->clk);
- }
if (mvsd_data->gpio_card_detect) {
- ret = gpio_request(mvsd_data->gpio_card_detect,
- DRIVER_NAME " cd");
+ ret = devm_gpio_request_one(&pdev->dev,
+ mvsd_data->gpio_card_detect,
+ GPIOF_IN, DRIVER_NAME " cd");
if (ret == 0) {
- gpio_direction_input(mvsd_data->gpio_card_detect);
irq = gpio_to_irq(mvsd_data->gpio_card_detect);
- ret = request_irq(irq, mvsd_card_detect_irq,
- IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING,
- DRIVER_NAME " cd", host);
+ ret = devm_request_irq(&pdev->dev, irq,
+ mvsd_card_detect_irq,
+ IRQ_TYPE_EDGE_RISING |
+ IRQ_TYPE_EDGE_FALLING,
+ DRIVER_NAME " cd", host);
if (ret == 0)
host->gpio_card_detect =
mvsd_data->gpio_card_detect;
else
- gpio_free(mvsd_data->gpio_card_detect);
+ devm_gpio_free(&pdev->dev,
+ mvsd_data->gpio_card_detect);
}
}
if (!host->gpio_card_detect)
mmc->caps |= MMC_CAP_NEEDS_POLL;
if (mvsd_data->gpio_write_protect) {
- ret = gpio_request(mvsd_data->gpio_write_protect,
- DRIVER_NAME " wp");
+ ret = devm_gpio_request_one(&pdev->dev,
+ mvsd_data->gpio_write_protect,
+ GPIOF_IN, DRIVER_NAME " wp");
if (ret == 0) {
- gpio_direction_input(mvsd_data->gpio_write_protect);
host->gpio_write_protect =
mvsd_data->gpio_write_protect;
}
@@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev)
return 0;
out:
- if (host) {
- if (host->irq)
- free_irq(host->irq, host);
- if (host->gpio_card_detect) {
- free_irq(gpio_to_irq(host->gpio_card_detect), host);
- gpio_free(host->gpio_card_detect);
- }
- if (host->gpio_write_protect)
- gpio_free(host->gpio_write_protect);
- if (host->base)
- iounmap(host->base);
- }
- if (r)
- release_resource(r);
- if (mmc)
- if (!IS_ERR_OR_NULL(host->clk)) {
+ if (mmc) {
+ if (!IS_ERR(host->clk))
clk_disable_unprepare(host->clk);
- clk_put(host->clk);
- }
mmc_free_host(mmc);
+ }
return ret;
}
@@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
- if (mmc) {
- struct mvsd_host *host = mmc_priv(mmc);
+ struct mvsd_host *host = mmc_priv(mmc);
- if (host->gpio_card_detect) {
- free_irq(gpio_to_irq(host->gpio_card_detect), host);
- gpio_free(host->gpio_card_detect);
- }
- mmc_remove_host(mmc);
- free_irq(host->irq, host);
- if (host->gpio_write_protect)
- gpio_free(host->gpio_write_protect);
- del_timer_sync(&host->timer);
- mvsd_power_down(host);
- iounmap(host->base);
- release_resource(host->res);
+ mmc_remove_host(mmc);
+ del_timer_sync(&host->timer);
+ mvsd_power_down(host);
+
+ if (!IS_ERR(host->clk))
+ clk_disable_unprepare(host->clk);
+ mmc_free_host(mmc);
- if (!IS_ERR(host->clk)) {
- clk_disable_unprepare(host->clk);
- clk_put(host->clk);
- }
- mmc_free_host(mmc);
- }
platform_set_drvdata(pdev, NULL);
return 0;
}
--
1.7.10.4
next prev parent reply other threads:[~2013-01-16 13:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 13:13 [PATCH 0/5] mmc: mvsdio: use devm_ API to simplify/correct error paths Andrew Lunn
2013-01-16 13:13 ` Andrew Lunn [this message]
2013-01-23 1:09 ` [PATCH 1/5] " Jason Cooper
2013-01-16 13:13 ` [PATCH 2/5] mmc: mvsdio: use slot-gpio infrastructure for write protect gpio Andrew Lunn
2013-01-16 13:13 ` [PATCH 3/5] mmc: mvsdio: use slot-gpio for card detect gpio Andrew Lunn
2013-01-16 13:13 ` [PATCH 4/5] mmc: mvsdio: implement a Device Tree binding Andrew Lunn
2013-01-16 13:14 ` [PATCH 5/5] mmc: mvsdio: add pinctrl integration Andrew Lunn
2013-01-23 1:44 ` [PATCH 0/5] mmc: mvsdio: use devm_ API to simplify/correct error paths Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358342040-7130-2-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).