linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] mmc: mvsdio: use slot-gpio for card detect gpio
Date: Wed, 16 Jan 2013 14:13:58 +0100	[thread overview]
Message-ID: <1358342040-7130-4-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1358342040-7130-1-git-send-email-andrew@lunn.ch>

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice
set of helper functions to simplify the management of the card detect
GPIO in MMC host drivers. This patch migrates the mvsdio driver to
using those helpers, which will make the ->probe() code simpler, and
therefore ease the process of adding a Device Tree binding for this
driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
 drivers/mmc/host/mvsdio.c |   39 +++++++++------------------------------
 1 file changed, 9 insertions(+), 30 deletions(-)

diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index c6dc8fd..704b7a3 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -52,7 +52,6 @@ struct mvsd_host {
 	struct mmc_host *mmc;
 	struct device *dev;
 	struct clk *clk;
-	int gpio_card_detect;
 };
 
 #define mvsd_write(offs, val)	writel(val, iobase + (offs))
@@ -538,13 +537,6 @@ static void mvsd_timeout_timer(unsigned long data)
 		mmc_request_done(host->mmc, mrq);
 }
 
-static irqreturn_t mvsd_card_detect_irq(int irq, void *dev)
-{
-	struct mvsd_host *host = dev;
-	mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-	return IRQ_HANDLED;
-}
-
 static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct mvsd_host *host = mmc_priv(mmc);
@@ -757,26 +749,11 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	if (!IS_ERR(host->clk))
 		clk_prepare_enable(host->clk);
 
-	if (mvsd_data->gpio_card_detect) {
-		ret = devm_gpio_request_one(&pdev->dev,
-					    mvsd_data->gpio_card_detect,
-					    GPIOF_IN, DRIVER_NAME " cd");
-		if (ret == 0) {
-			irq = gpio_to_irq(mvsd_data->gpio_card_detect);
-			ret = devm_request_irq(&pdev->dev, irq,
-					       mvsd_card_detect_irq,
-					       IRQ_TYPE_EDGE_RISING |
-					       IRQ_TYPE_EDGE_FALLING,
-					       DRIVER_NAME " cd", host);
-			if (ret == 0)
-				host->gpio_card_detect =
-					mvsd_data->gpio_card_detect;
-			else
-				devm_gpio_free(&pdev->dev,
-					       mvsd_data->gpio_card_detect);
-		}
-	}
-	if (!host->gpio_card_detect)
+	if (gpio_is_valid(mvsd_data->gpio_card_detect)) {
+		ret = mmc_gpio_request_cd(mmc, mvsd_data->gpio_card_detect);
+		if (ret)
+			goto out;
+	} else
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
@@ -789,15 +766,16 @@ static int __init mvsd_probe(struct platform_device *pdev)
 
 	pr_notice("%s: %s driver initialized, ",
 			   mmc_hostname(mmc), DRIVER_NAME);
-	if (host->gpio_card_detect)
+	if (!(mmc->caps & MMC_CAP_NEEDS_POLL))
 		printk("using GPIO %d for card detection\n",
-		       host->gpio_card_detect);
+		       mvsd_data->gpio_card_detect);
 	else
 		printk("lacking card detect (fall back to polling)\n");
 	return 0;
 
 out:
 	if (mmc) {
+		mmc_gpio_free_cd(mmc);
 		mmc_gpio_free_ro(mmc);
 		if (!IS_ERR(host->clk))
 			clk_disable_unprepare(host->clk);
@@ -813,6 +791,7 @@ static int __exit mvsd_remove(struct platform_device *pdev)
 
 	struct mvsd_host *host = mmc_priv(mmc);
 
+	mmc_gpio_free_cd(mmc);
 	mmc_gpio_free_ro(mmc);
 	mmc_remove_host(mmc);
 	del_timer_sync(&host->timer);
-- 
1.7.10.4

  parent reply	other threads:[~2013-01-16 13:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-16 13:13 [PATCH 0/5] mmc: mvsdio: use devm_ API to simplify/correct error paths Andrew Lunn
2013-01-16 13:13 ` [PATCH 1/5] " Andrew Lunn
2013-01-23  1:09   ` Jason Cooper
2013-01-16 13:13 ` [PATCH 2/5] mmc: mvsdio: use slot-gpio infrastructure for write protect gpio Andrew Lunn
2013-01-16 13:13 ` Andrew Lunn [this message]
2013-01-16 13:13 ` [PATCH 4/5] mmc: mvsdio: implement a Device Tree binding Andrew Lunn
2013-01-16 13:14 ` [PATCH 5/5] mmc: mvsdio: add pinctrl integration Andrew Lunn
2013-01-23  1:44 ` [PATCH 0/5] mmc: mvsdio: use devm_ API to simplify/correct error paths Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358342040-7130-4-git-send-email-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).