From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 03/22] mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path
Date: Wed, 16 Jan 2013 16:43:34 +0200 [thread overview]
Message-ID: <1358347433-329-4-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1358347433-329-1-git-send-email-rogerq@ti.com>
Use devm_ variants of kzalloc() and ioremap(). Simplify the error path.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/mfd/omap-usb-tll.c | 36 +++++++++++-------------------------
1 files changed, 11 insertions(+), 25 deletions(-)
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 9658e18..53ed10b 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -215,11 +215,10 @@ static int usbtll_omap_probe(struct platform_device *pdev)
dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
- tll = kzalloc(sizeof(struct usbtll_omap), GFP_KERNEL);
+ tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
if (!tll) {
dev_err(dev, "Memory allocation failed\n");
- ret = -ENOMEM;
- goto end;
+ return -ENOMEM;
}
spin_lock_init(&tll->lock);
@@ -230,28 +229,22 @@ static int usbtll_omap_probe(struct platform_device *pdev)
if (IS_ERR(tll->usbtll_p1_fck)) {
ret = PTR_ERR(tll->usbtll_p1_fck);
dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
- goto err_tll;
+ return ret;
}
tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
if (IS_ERR(tll->usbtll_p2_fck)) {
ret = PTR_ERR(tll->usbtll_p2_fck);
dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
- goto err_usbtll_p1_fck;
+ goto err_p2_fck;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "usb tll get resource failed\n");
- ret = -ENODEV;
- goto err_usbtll_p2_fck;
- }
-
- base = ioremap(res->start, resource_size(res));
+ base = devm_request_and_ioremap(dev, res);
if (!base) {
- dev_err(dev, "TLL ioremap failed\n");
ret = -ENOMEM;
- goto err_usbtll_p2_fck;
+ dev_err(dev, "Resource request/ioremap failed:%d\n", ret);
+ goto err_res;
}
platform_set_drvdata(pdev, tll);
@@ -323,23 +316,17 @@ static int usbtll_omap_probe(struct platform_device *pdev)
}
spin_unlock_irqrestore(&tll->lock, flags);
- iounmap(base);
pm_runtime_put_sync(dev);
tll_pdev = pdev;
- if (!ret)
- goto end;
- pm_runtime_disable(dev);
-err_usbtll_p2_fck:
+ return 0;
+
+err_res:
clk_put(tll->usbtll_p2_fck);
-err_usbtll_p1_fck:
+err_p2_fck:
clk_put(tll->usbtll_p1_fck);
-err_tll:
- kfree(tll);
-
-end:
return ret;
}
@@ -356,7 +343,6 @@ static int usbtll_omap_remove(struct platform_device *pdev)
clk_put(tll->usbtll_p2_fck);
clk_put(tll->usbtll_p1_fck);
pm_runtime_disable(&pdev->dev);
- kfree(tll);
return 0;
}
--
1.7.4.1
next prev parent reply other threads:[~2013-01-16 14:43 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 14:43 [PATCH v6 00/22] OMAP USB Host cleanup Roger Quadros
2013-01-16 14:43 ` [PATCH v6 01/22] mfd: omap-usb-host: Consolidate OMAP USB-HS platform data Roger Quadros
2013-01-16 14:43 ` [PATCH v6 02/22] mfd: omap-usb-tll: Fix channel count detection Roger Quadros
2013-01-16 14:43 ` Roger Quadros [this message]
2013-01-16 19:37 ` [PATCH v6 03/22] mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path Sergei Shtylyov
2013-01-17 9:12 ` Roger Quadros
2013-01-17 10:32 ` Roger Quadros
2013-01-16 14:43 ` [PATCH v6 04/22] mfd: omap-usb-tll: Clean up clock handling Roger Quadros
2013-01-16 14:55 ` Russell King - ARM Linux
2013-01-16 15:05 ` Roger Quadros
2013-01-16 14:43 ` [PATCH v6 05/22] mfd: omap-usb-tll: introduce and use mode_needs_tll() Roger Quadros
2013-01-16 14:43 ` [PATCH v6 06/22] mfd: omap-usb-tll: Check for missing platform data in probe Roger Quadros
2013-01-16 14:43 ` [PATCH v6 07/22] mfd: omap-usb-tll: Fix error message Roger Quadros
2013-01-16 14:43 ` [PATCH v6 08/22] mfd: omap-usb-tll: serialize access to TLL device Roger Quadros
2013-01-16 14:43 ` [PATCH v6 09/22] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support Roger Quadros
2013-01-16 14:43 ` [PATCH v6 10/22] mfd: omap_usb_host: Avoid missing platform data checks in suspend/resume Roger Quadros
2013-01-16 14:43 ` [PATCH v6 11/22] mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap() Roger Quadros
2013-01-16 19:34 ` Sergei Shtylyov
2013-01-16 14:43 ` [PATCH v6 12/22] mfd: omap-usb-host: know about number of ports from revision register Roger Quadros
2013-01-16 14:43 ` [PATCH v6 13/22] mfd: omap-usb-host: override number of ports from platform data Roger Quadros
2013-01-16 14:43 ` [PATCH v6 14/22] mfd: omap-usb-host: cleanup clock management code Roger Quadros
2013-01-16 14:43 ` [PATCH v6 15/22] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode Roger Quadros
2013-01-16 14:43 ` [PATCH v6 16/22] mfd: omap-usb-host: Get rid of unnecessary spinlock Roger Quadros
2013-01-16 14:43 ` [PATCH v6 17/22] mfd: omap-usb-host: clean up omap_usbhs_init() Roger Quadros
2013-01-16 14:43 ` [PATCH v6 18/22] USB: ehci-omap: Don't free gpios that we didn't request Roger Quadros
2013-01-16 14:43 ` [PATCH v6 19/22] ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies Roger Quadros
2013-01-16 14:43 ` [PATCH v6 20/22] ARM: OMAP4: clock data: get rid of unused USB host clock aliases Roger Quadros
2013-01-16 14:43 ` [PATCH v6 21/22] mfd: omap-usb-host: Don't spam console on clk_set_parent failure Roger Quadros
2013-01-16 14:43 ` [PATCH v6 22/22] mdf: omap-usb-host: get rid of build warning Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358347433-329-4-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).