linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: laurent.cans@gmail.com (Laurent Cans)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4] Add apf51 basic support
Date: Sun, 20 Jan 2013 23:55:29 +0100	[thread overview]
Message-ID: <1358722529-19982-1-git-send-email-laurent.cans@gmail.com> (raw)

Signed-off-by: Laurent Cans <laurent.cans@gmail.com>
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
---
Differences between v3 and v4
- introduce new file in Documentation directory
- remove useless property in clock node
Differences between v2 and v3
- remove nand device
Differences between v1 and v2
- change board name according project convention
- remove useless compatible properties
- add project copyright
- use device name instead of soc structure for description
- add an entry for the board on documentation

 Documentation/devicetree/bindings/arm/armadeus.txt |    6 +++
 arch/arm/boot/dts/Makefile                         |    3 +-
 arch/arm/boot/dts/imx51-apf51.dts                  |   52 ++++++++++++++++++++
 arch/arm/boot/dts/imx51.dtsi                       |   30 +++++++++++
 4 files changed, 90 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/armadeus.txt
 create mode 100644 arch/arm/boot/dts/imx51-apf51.dts

diff --git a/Documentation/devicetree/bindings/arm/armadeus.txt b/Documentation/devicetree/bindings/arm/armadeus.txt
new file mode 100644
index 0000000..9821283
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armadeus.txt
@@ -0,0 +1,6 @@
+Armadeus i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+APF51: i.MX51 based module.
+Required root node properties:
+    - compatible = "armadeus,imx51-apf51", "fsl,imx51";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5ebb44f..d89b97f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -79,7 +79,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-xp-db.dtb \
 	armada-xp-openblocks-ax3-4.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
+dtb-$(CONFIG_ARCH_MXC) += imx51-apf51.dtb \
+	imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \
 	imx53-qsb.dtb \
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
new file mode 100644
index 0000000..92d3a66
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_2>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 0>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 1f5d45e..8427279 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -273,6 +273,29 @@
 							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
 						>;
 					};
+
+					pinctrl_fec_2: fecgrp-2 {
+						fsl,pins = <
+							589 0x80000000 /* MX51_PAD_DI_GP3__FEC_TX_ER */
+							592 0x80000000 /* MX51_PAD_DI2_PIN4__FEC_CRS */
+							594 0x80000000 /* MX51_PAD_DI2_PIN2__FEC_MDC */
+							596 0x80000000 /* MX51_PAD_DI2_PIN3__FEC_MDIO */
+							598 0x80000000 /* MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 */
+							602 0x80000000 /* MX51_PAD_DI_GP4__FEC_RDATA2 */
+							604 0x80000000 /* MX51_PAD_DISP2_DAT0__FEC_RDATA3 */
+							609 0x80000000 /* MX51_PAD_DISP2_DAT1__FEC_RX_ER */
+							618 0x80000000 /* MX51_PAD_DISP2_DAT6__FEC_TDATA1 */
+							623 0x80000000 /* MX51_PAD_DISP2_DAT7__FEC_TDATA2 */
+							628 0x80000000 /* MX51_PAD_DISP2_DAT8__FEC_TDATA3 */
+							634 0x80000000 /* MX51_PAD_DISP2_DAT9__FEC_TX_EN */
+							639 0x80000000 /* MX51_PAD_DISP2_DAT10__FEC_COL */
+							644 0x80000000 /* MX51_PAD_DISP2_DAT11__FEC_RX_CLK */
+							649 0x80000000 /* MX51_PAD_DISP2_DAT12__FEC_RX_DV */
+							653 0x80000000 /* MX51_PAD_DISP2_DAT13__FEC_TX_CLK */
+							657 0x80000000 /* MX51_PAD_DISP2_DAT14__FEC_RDATA0 */
+							662 0x80000000 /* MX51_PAD_DISP2_DAT15__FEC_TDATA0 */
+						>;
+					};
 				};
 
 				ecspi1 {
@@ -409,6 +432,13 @@
 							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
 						>;
 					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							434 0x1c5	/* MX51_PAD_UART3_RXD__UART3_RXD */
+							430 0x1c5	/* MX51_PAD_UART3_TXD__UART3_TXD */
+						>;
+					};
 				};
 			};
 
-- 
1.7.10.4

             reply	other threads:[~2013-01-20 22:55 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-20 22:55 Laurent Cans [this message]
2013-01-21  7:56 ` [PATCH V4] Add apf51 basic support Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358722529-19982-1-git-send-email-laurent.cans@gmail.com \
    --to=laurent.cans@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).