From: thomas.abraham@linaro.org (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/7] ARM: Exynos: Enable device tree support for MCT controller
Date: Mon, 21 Jan 2013 02:02:15 -0800 [thread overview]
Message-ID: <1358762542-19008-1-git-send-email-thomas.abraham@linaro.org> (raw)
Changes since v3:
- Based on Stephen Warren's CONFIG_CLKSRC_OF patches (merged from arm-soc
'timer/cleanup' branch).
- Moved the mct driver from mach-exynos to drivers/clocksource
Changes since v2:
- Rebased to linux 3.8-rc1
Changes since v1:
- Includes changes suggested by Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
This patch series adds device tree support for Exynos4/5 MCT controller and
moves the MCT driver from mach-exynos to drivers/clocksource. These patches
are based on Stephen Warren's CONFIG_CLKSRC_OF patches which were merged from
the 'timer/cleanup' branch of the arm-soc tree. It also depends on the
following two patches.
- http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/143084.html
- http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/143119.html
This patch series has been tested on Exynos4210 based Origen board, Exynos4412
based Origen board and Exynos5250 based SMDK board.
Thomas Abraham (7):
ARM: Exynos: add a register base address variable in mct controller driver
ARM: Exynos: prepare an array of MCT interrupt numbers and use it
ARM: Exynos: add device tree support for MCT controller driver
ARM: Exynos: allow dt based discovery of mct controller using clocksource_of_init
ARM: dts: add mct device tree node for all supported Exynos SoC's
ARM: Exynos: remove static io-remapping of mct registers for Exynos5
ARM: Exynos: move mct driver to drivers/clocksource
.../bindings/timer/samsung,exynos4210-mct.txt | 68 +++++++
arch/arm/Kconfig | 2 +-
arch/arm/boot/dts/exynos4210.dtsi | 7 +
arch/arm/boot/dts/exynos4212.dtsi | 9 +
arch/arm/boot/dts/exynos4412.dtsi | 7 +
arch/arm/boot/dts/exynos5250.dtsi | 20 ++
arch/arm/mach-exynos/Kconfig | 8 +-
arch/arm/mach-exynos/Makefile | 2 -
arch/arm/mach-exynos/common.c | 5 -
arch/arm/mach-exynos/common.h | 2 +-
arch/arm/mach-exynos/include/mach/irqs.h | 6 -
arch/arm/mach-exynos/include/mach/map.h | 1 -
arch/arm/mach-exynos/include/mach/regs-mct.h | 53 ------
arch/arm/mach-exynos/mach-armlex4210.c | 2 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 3 +-
arch/arm/mach-exynos/mach-exynos5-dt.c | 3 +-
arch/arm/mach-exynos/mach-nuri.c | 2 +-
arch/arm/mach-exynos/mach-origen.c | 2 +-
arch/arm/mach-exynos/mach-smdk4x12.c | 4 +-
arch/arm/mach-exynos/mach-smdkv310.c | 4 +-
drivers/clocksource/Kconfig | 5 +
drivers/clocksource/Makefile | 1 +
.../mct.c => drivers/clocksource/exynos_mct.c | 197 +++++++++++++-------
23 files changed, 264 insertions(+), 149 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
delete mode 100644 arch/arm/mach-exynos/include/mach/regs-mct.h
rename arch/arm/mach-exynos/mct.c => drivers/clocksource/exynos_mct.c (67%)
next reply other threads:[~2013-01-21 10:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-21 10:02 Thomas Abraham [this message]
2013-01-21 10:02 ` [PATCH v4 1/7] ARM: Exynos: add a register base address variable in mct controller driver Thomas Abraham
2013-01-21 10:02 ` [PATCH v4 2/7] ARM: Exynos: prepare an array of MCT interrupt numbers and use it Thomas Abraham
2013-01-21 10:02 ` [PATCH v4 3/7] ARM: Exynos: add device tree support for MCT controller driver Thomas Abraham
2013-01-21 13:46 ` Mark Rutland
2013-01-21 18:34 ` Thomas Abraham
2013-01-28 20:59 ` Stephen Warren
2013-01-21 10:02 ` [PATCH v4 4/7] ARM: Exynos: allow dt based discovery of mct controller using clocksource_of_init Thomas Abraham
2013-01-28 20:57 ` Stephen Warren
2013-01-30 17:50 ` Stephen Warren
2013-01-21 10:02 ` [PATCH v4 5/7] ARM: dts: add mct device tree node for all supported Exynos SoC's Thomas Abraham
2013-01-21 10:02 ` [PATCH v4 6/7] ARM: Exynos: remove static io-remapping of mct registers for Exynos5 Thomas Abraham
2013-01-21 10:02 ` [PATCH v4 7/7] ARM: Exynos: move mct driver to drivers/clocksource Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358762542-19008-1-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).