From: stigge@antcom.de (Roland Stigge)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6 v14] gpio: Add device tree support to block GPIO API
Date: Tue, 22 Jan 2013 13:06:43 +0100 [thread overview]
Message-ID: <1358856404-8975-6-git-send-email-stigge@antcom.de> (raw)
In-Reply-To: <1358856404-8975-1-git-send-email-stigge@antcom.de>
This patch adds device tree support to the block GPIO API.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
Documentation/devicetree/bindings/gpio/gpio-block.txt | 36 ++++++
drivers/gpio/Makefile | 1
drivers/gpio/gpioblock-of.c | 100 ++++++++++++++++++
3 files changed, 137 insertions(+)
--- /dev/null
+++ linux-2.6/Documentation/devicetree/bindings/gpio/gpio-block.txt
@@ -0,0 +1,36 @@
+Block GPIO definition
+=====================
+
+This binding specifies arbitrary blocks of gpios, combining gpios from one or
+more GPIO controllers together, to form a word for r/w access.
+
+Required property:
+- compatible: must be "linux,gpio-block"
+
+Required subnodes:
+- the name will be the registered name of the block
+- property "gpios" is a list of gpios for the respective block
+
+Example:
+
+ blockgpio {
+ compatible = "linux,gpio-block";
+
+ block0 {
+ gpios = <&gpio 3 0 0>,
+ <&gpio 3 1 0>;
+ };
+ block1 {
+ gpios = <&gpio 4 1 0>,
+ <&gpio 4 3 0>,
+ <&gpio 4 2 0>,
+ <&gpio 4 4 0>,
+ <&gpio 4 5 0>,
+ <&gpio 4 6 0>,
+ <&gpio 4 7 0>,
+ <&gpio 4 8 0>,
+ <&gpio 4 9 0>,
+ <&gpio 4 10 0>,
+ <&gpio 4 19 0>;
+ };
+ };
--- linux-2.6.orig/drivers/gpio/Makefile
+++ linux-2.6/drivers/gpio/Makefile
@@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
obj-$(CONFIG_GPIOLIB) += gpiolib.o devres.o
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
+obj-$(CONFIG_OF_GPIO) += gpioblock-of.o
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
--- /dev/null
+++ linux-2.6/drivers/gpio/gpioblock-of.c
@@ -0,0 +1,100 @@
+/*
+ * OF implementation for Block GPIO
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+static int gpioblock_of_probe(struct platform_device *pdev)
+{
+ struct device_node *block;
+ unsigned *gpios;
+ int ngpio;
+ int ret;
+ struct gpio_block *gb;
+
+ for_each_available_child_of_node(pdev->dev.of_node, block) {
+ int i;
+
+ ngpio = of_gpio_count(block);
+ if (ngpio < 1) {
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ gpios = kzalloc(ngpio * sizeof(*gpios), GFP_KERNEL);
+ if (!gpios) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ for (i = 0; i < ngpio; i++) {
+ ret = of_get_gpio(block, i);
+ if (ret < 0)
+ goto err2; /* expect -EPROBE_DEFER */
+ gpios[i] = ret;
+ }
+ gb = gpio_block_create(gpios, ngpio, block->name);
+ if (IS_ERR(gb)) {
+ dev_err(&pdev->dev,
+ "Error creating GPIO block from device tree\n");
+ ret = PTR_ERR(gb);
+ goto err2;
+ }
+ ret = gpio_block_register(gb);
+ if (ret < 0)
+ goto err3;
+
+ kfree(gpios);
+ dev_info(&pdev->dev, "Registered gpio block %s: %d gpios\n",
+ block->name, ngpio);
+ }
+ return 0;
+
+err3:
+ gpio_block_free(gb);
+err2:
+ kfree(gpios);
+err1:
+ of_node_put(block);
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id gpioblock_of_match[] = {
+ { .compatible = "linux,gpio-block", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, gpioblock_of_match);
+#endif
+
+static struct platform_driver gpioblock_of_driver = {
+ .driver = {
+ .name = "gpio-block",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpioblock_of_match),
+
+ },
+ .probe = gpioblock_of_probe,
+};
+
+module_platform_driver(gpioblock_of_driver);
+
+MODULE_DESCRIPTION("GPIO Block driver");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpioblock-of");
next prev parent reply other threads:[~2013-01-22 12:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 12:06 [PATCH 0/6 v14] gpio: Add block GPIO Roland Stigge
2013-01-22 12:06 ` [PATCH 1/6 v14] gpio: Add a block GPIO API to gpiolib Roland Stigge
2013-01-27 13:19 ` Stijn Devriendt
2013-01-27 13:58 ` Roland Stigge
2013-01-28 11:30 ` Stijn Devriendt
2013-01-31 20:56 ` Linus Walleij
2013-01-22 12:06 ` [PATCH 2/6 v14] gpio: Add sysfs support to block GPIO API Roland Stigge
2013-01-22 12:06 ` [PATCH 3/6 v14] gpio: Add userland device interface to block GPIO Roland Stigge
2013-01-23 1:03 ` Jonathan Corbet
2013-01-23 18:47 ` Roland Stigge
2013-01-24 9:13 ` Alexander Stein
2013-01-22 12:06 ` [PATCH 4/6 v14] gpiolib: Fix default attributes for class Roland Stigge
2013-01-22 12:06 ` Roland Stigge [this message]
2013-01-27 13:07 ` [PATCH 5/6 v14] gpio: Add device tree support to block GPIO API Stijn Devriendt
2013-01-27 14:29 ` Roland Stigge
2013-01-28 11:39 ` Stijn Devriendt
2013-01-28 12:29 ` Roland Stigge
2013-01-22 12:06 ` [PATCH 6/6 v14] gpio: Add block gpio to several gpio drivers Roland Stigge
2013-01-24 12:02 ` Stijn Devriendt
2013-01-24 12:17 ` Mark Brown
2013-01-24 12:19 ` Roland Stigge
2013-01-27 12:18 ` Stijn Devriendt
2013-01-27 13:48 ` Roland Stigge
2013-01-28 11:27 ` Stijn Devriendt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358856404-8975-6-git-send-email-stigge@antcom.de \
--to=stigge@antcom.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).