From: Barry.Song@csr.com (Barry Song)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/9] ARM: PRIMA2: bringup new CSR SiRFmarco SMP SoC
Date: Tue, 22 Jan 2013 20:19:14 +0800 [thread overview]
Message-ID: <1358857154-9915-1-git-send-email-Barry.Song@csr.com> (raw)
change list:
-v3:
handle feedbacks from Mark Rutland, thanks, Mark!
1. cleanup marco.dtsi and marco-evb.dts according to Mark Rutland's feedback
- "sirf,marco-cb" come before "sirf,marco"; both compatible strings were
documented
- change lcd0 at N to lcd0_N -- ePAPR says the unit-address should match the
reg property, and if there's no reg property the unit-address must be
omitted.
- and so on
2. used designated initializers and delete magic number in l2x0.c
3. Runaway commit message for "enable AUTO_ZRELADDR for SIRF in Kconfig"
4. use arm_dt_init_cpu_maps to get cpu mapping instead of reading scu
5. delete some repeated codes for timer0 and timer1 of marco
-v2:
1. cleanup marco.dtsi according to Mark Rutland's feedback
2. use of_device_id::data to handle the difference of l2x0 aux setting
according to Mark Rutland's feedback
3. rebase to the newest timer/cleanup branch, removing sys_timer
-v1:
1. Marco has different OS timer hardware with Prima2, so add a new timer-marco
2. add platsmp.c, headsmp.S and hotplug.c for MPcore support
3. some hardwares have changed, like rstc, so use of_compatible to branch Prima2
and Marco
4. add initial .dtsi for Marco SoC and initial .dts for the EVB
5. use GIC for Marco instead of Prima2's IRQ controller
6. add DEBUG_LL uart ports for Prima2 and Marco debug ports
Barry Song (9):
ARM: PRIMA2: add CSR SiRFmarco device tree .dts
ARM: PRIMA2: enable AUTO_ZRELADDR for SIRF in Kconfig
ARM: PRIMA2: initialize l2x0 according to mach from DT
ARM: PRIMA2: mv timer to timer-prima2 as we will add timer-marco
ARM: PRIMA2: rstc: enable the support for Marco
ARM: PRIMA2: rtciobg: it is also compatible with marco
ARM: PRIMA2: irq: make prima2 irq can work even we enable GIC for
Marco
ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco
Documentation/devicetree/bindings/arm/sirf.txt | 10 +-
arch/arm/Kconfig | 1 +
arch/arm/Kconfig.debug | 14 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/marco-evb.dts | 54 ++
arch/arm/boot/dts/marco.dtsi | 756 ++++++++++++++++++++++
arch/arm/configs/prima2_defconfig | 3 +
arch/arm/mach-prima2/Kconfig | 10 +
arch/arm/mach-prima2/Makefile | 5 +-
arch/arm/mach-prima2/common.c | 45 ++-
arch/arm/mach-prima2/common.h | 15 +-
arch/arm/mach-prima2/headsmp.S | 79 +++
arch/arm/mach-prima2/hotplug.c | 41 ++
arch/arm/mach-prima2/include/mach/irqs.h | 4 +-
arch/arm/mach-prima2/include/mach/uart.h | 6 +
arch/arm/mach-prima2/include/mach/uncompress.h | 3 +
arch/arm/mach-prima2/irq.c | 16 +-
arch/arm/mach-prima2/l2x0.c | 29 +-
arch/arm/mach-prima2/platsmp.c | 163 +++++
arch/arm/mach-prima2/rstc.c | 45 +-
arch/arm/mach-prima2/rtciobrg.c | 1 +
arch/arm/mach-prima2/timer-marco.c | 316 +++++++++
arch/arm/mach-prima2/{timer.c => timer-prima2.c} | 6 +-
23 files changed, 1588 insertions(+), 35 deletions(-)
create mode 100644 arch/arm/boot/dts/marco-evb.dts
create mode 100644 arch/arm/boot/dts/marco.dtsi
create mode 100644 arch/arm/mach-prima2/headsmp.S
create mode 100644 arch/arm/mach-prima2/hotplug.c
create mode 100644 arch/arm/mach-prima2/platsmp.c
create mode 100644 arch/arm/mach-prima2/timer-marco.c
rename arch/arm/mach-prima2/{timer.c => timer-prima2.c} (98%)
--
1.7.5.4
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Follow CSR on Twitter at http://twitter.com/CSR_PLC and read our blog at www.csr.com/blog
next reply other threads:[~2013-01-22 12:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 12:19 Barry Song [this message]
2013-02-20 17:27 ` [PATCH v3 0/9] ARM: PRIMA2: bringup new CSR SiRFmarco SMP SoC Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358857154-9915-1-git-send-email-Barry.Song@csr.com \
--to=barry.song@csr.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox