From mboxrd@z Thu Jan 1 00:00:00 1970 From: tobetter@gmail.com (Dongjin Kim) Date: Fri, 25 Jan 2013 03:46:08 +0900 Subject: [PATCH RESEND] ARM: dts: max77686: Add DTS file for max77686 PMIC Message-ID: <1359053177-17725-1-git-send-email-tobetter@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds a dedicated DTS file for max77686 PMIC, supposed to be included in a board DTS to control the power for certain consumer devices or AP with 9 BUCKs and 26 LDOs Signed-off-by: Dongjin Kim --- arch/arm/boot/dts/max77686.dtsi | 156 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100644 arch/arm/boot/dts/max77686.dtsi diff --git a/arch/arm/boot/dts/max77686.dtsi b/arch/arm/boot/dts/max77686.dtsi new file mode 100644 index 0000000..b80baef --- /dev/null +++ b/arch/arm/boot/dts/max77686.dtsi @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2013 Dongjin Kim + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +&max77686 { + compatible = "maxim,max77686"; + + interrupt-controller; + #interrupt-cells = <1>; + + voltage-regulators { + buck1: buck at 10 { + regulator-compatible = "BUCK1"; + }; + + buck2: buck at 12 { + regulator-compatible = "BUCK2"; + }; + + buck3: buck at 1c { + regulator-compatible = "BUCK3"; + }; + + buck4: buck at 26 { + regulator-compatible = "BUCK4"; + }; + + buck5: buck at 30 { + regulator-compatible = "BUCK5"; + }; + + buck6: buck at 32 { + regulator-compatible = "BUCK6"; + }; + + buck7: buck at 34 { + regulator-compatible = "BUCK7"; + }; + + buck8: buck at 36 { + regulator-compatible = "BUCK8"; + }; + + buck9: buck at 38 { + regulator-compatible = "BUCK9"; + }; + + ldo1: ldo at 40 { + regulator-compatible = "LDO1"; + }; + + ldo2: ldo at 41 { + regulator-compatible = "LDO2"; + }; + + ldo3: ldo at 42 { + regulator-compatible = "LDO3"; + }; + + ldo4: ldo at 43 { + regulator-compatible = "LDO4"; + }; + + ldo5: ldo at 44 { + regulator-compatible = "LDO5"; + }; + + ldo6: ldo at 45 { + regulator-compatible = "LDO6"; + }; + + ldo7: ldo at 46 { + regulator-compatible = "LDO7"; + }; + + ldo8: ldo at 47 { + regulator-compatible = "LDO8"; + }; + + ldo9: ldo at 48 { + regulator-compatible = "LDO9"; + }; + + ldo10: ldo at 49 { + regulator-compatible = "LDO10"; + }; + + ldo11: ldo at 4a { + regulator-compatible = "LDO11"; + }; + + ldo12: ldo at 4b { + regulator-compatible = "LDO12"; + }; + + ldo13: ldo at 4c { + regulator-compatible = "LDO13"; + }; + + ldo14: ldo at 4d { + regulator-compatible = "LDO14"; + }; + + ldo15: ldo at 4e { + regulator-compatible = "LDO15"; + }; + + ldo16: ldo at 4f { + regulator-compatible = "LDO16"; + }; + + ldo17: ldo at 50 { + regulator-compatible = "LDO17"; + }; + + ldo18: ldo at 51 { + regulator-compatible = "LDO18"; + }; + + ldo19: ldo at 52 { + regulator-compatible = "LDO19"; + }; + + ldo20: ldo at 53 { + regulator-compatible = "LDO20"; + }; + + ldo21: ldo at 54 { + regulator-compatible = "LDO21"; + }; + + ldo22: ldo at 55 { + regulator-compatible = "LDO22"; + }; + + ldo23: ldo at 56 { + regulator-compatible = "LDO23"; + }; + + ldo24: ldo at 57 { + regulator-compatible = "LDO24"; + }; + + ldo25: ldo at 58 { + regulator-compatible = "LDO25"; + }; + + ldo26: ldo at 59 { + regulator-compatible = "LDO26"; + }; + }; +}; -- 1.7.10.4