* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
@ 2012-09-19 9:32 Kishon Vijay Abraham I
2012-09-20 3:21 ` Benoit Cousson
0 siblings, 1 reply; 10+ messages in thread
From: Kishon Vijay Abraham I @ 2012-09-19 9:32 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds dt data to get MUSB working in omap4 and omap3
Changes from v2:
* Changes the subject of all the patches to include "ARM: dts:"
* Added reg property and interrupt property for "usb_otg_hs". Previously these
were obtained from ti,hwmods property.
* Rebased on
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git devel-dt
Changes from v1:
Just removed the omap-usb2 dt data and sent that as a separate patch.
Kishon Vijay Abraham I (3):
ARM: dts: Add twl6030-usb data
ARM: dts: Add twl4030-usb data
ARM: dts: omap: Add usb_otg and glue data
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 11 +++++++++++
arch/arm/boot/dts/omap4-panda.dts | 10 ++++++++++
arch/arm/boot/dts/omap4-sdp.dts | 10 ++++++++++
arch/arm/boot/dts/omap4.dtsi | 12 ++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 21 +++++++++++++++++++++
arch/arm/boot/dts/twl6030.dtsi | 5 +++++
9 files changed, 87 insertions(+)
--
1.7.9.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
2012-09-19 9:32 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
@ 2012-09-20 3:21 ` Benoit Cousson
2012-12-27 18:35 ` Aaro Koskinen
0 siblings, 1 reply; 10+ messages in thread
From: Benoit Cousson @ 2012-09-20 3:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kishon,
On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
> This patch series adds dt data to get MUSB working in omap4 and omap3
>
> Changes from v2:
> * Changes the subject of all the patches to include "ARM: dts:"
> * Added reg property and interrupt property for "usb_otg_hs". Previously these
> were obtained from ti,hwmods property.
> * Rebased on
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git devel-dt
>
> Changes from v1:
> Just removed the omap-usb2 dt data and sent that as a separate patch.
>
> Kishon Vijay Abraham I (3):
> ARM: dts: Add twl6030-usb data
> ARM: dts: Add twl4030-usb data
> ARM: dts: omap: Add usb_otg and glue data
Thanks for the update. I've just pulled the series for 3.7.
Regards,
Benoit
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
2012-09-20 3:21 ` Benoit Cousson
@ 2012-12-27 18:35 ` Aaro Koskinen
2013-01-10 6:19 ` kishon
0 siblings, 1 reply; 10+ messages in thread
From: Aaro Koskinen @ 2012-12-27 18:35 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thu, Sep 20, 2012 at 05:21:15AM +0200, Benoit Cousson wrote:
> On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
> > This patch series adds dt data to get MUSB working in omap4 and omap3
> >
> > Changes from v2:
> > * Changes the subject of all the patches to include "ARM: dts:"
> > * Added reg property and interrupt property for "usb_otg_hs". Previously these
> > were obtained from ti,hwmods property.
> > * Rebased on
> > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git devel-dt
> >
> > Changes from v1:
> > Just removed the omap-usb2 dt data and sent that as a separate patch.
> >
> > Kishon Vijay Abraham I (3):
> > ARM: dts: Add twl6030-usb data
> > ARM: dts: Add twl4030-usb data
> > ARM: dts: omap: Add usb_otg and glue data
>
> Thanks for the update. I've just pulled the series for 3.7.
I wonder what happened to the patch #3 (Add usb_otg and glue data)
of this series? Why was it dropped? I cannot see it in 3.7 or 3.8-rc1.
A.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
2012-12-27 18:35 ` Aaro Koskinen
@ 2013-01-10 6:19 ` kishon
2013-01-10 9:58 ` Benoit Cousson
0 siblings, 1 reply; 10+ messages in thread
From: kishon @ 2013-01-10 6:19 UTC (permalink / raw)
To: linux-arm-kernel
On Friday 28 December 2012 12:05 AM, Aaro Koskinen wrote:
> Hi,
>
> On Thu, Sep 20, 2012 at 05:21:15AM +0200, Benoit Cousson wrote:
>> On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
>>> This patch series adds dt data to get MUSB working in omap4 and omap3
>>>
>>> Changes from v2:
>>> * Changes the subject of all the patches to include "ARM: dts:"
>>> * Added reg property and interrupt property for "usb_otg_hs". Previously these
>>> were obtained from ti,hwmods property.
>>> * Rebased on
>>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git devel-dt
>>>
>>> Changes from v1:
>>> Just removed the omap-usb2 dt data and sent that as a separate patch.
>>>
>>> Kishon Vijay Abraham I (3):
>>> ARM: dts: Add twl6030-usb data
>>> ARM: dts: Add twl4030-usb data
>>> ARM: dts: omap: Add usb_otg and glue data
>>
>> Thanks for the update. I've just pulled the series for 3.7.
>
> I wonder what happened to the patch #3 (Add usb_otg and glue data)
> of this series? Why was it dropped? I cannot see it in 3.7 or 3.8-rc1.
Benoit?
-Kishon
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
2013-01-10 6:19 ` kishon
@ 2013-01-10 9:58 ` Benoit Cousson
2013-01-10 10:53 ` kishon
0 siblings, 1 reply; 10+ messages in thread
From: Benoit Cousson @ 2013-01-10 9:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi Kishon,
On 01/10/2013 07:19 AM, kishon wrote:
> On Friday 28 December 2012 12:05 AM, Aaro Koskinen wrote:
>> Hi,
>>
>> On Thu, Sep 20, 2012 at 05:21:15AM +0200, Benoit Cousson wrote:
>>> On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
>>>> This patch series adds dt data to get MUSB working in omap4 and omap3
>>>>
>>>> Changes from v2:
>>>> * Changes the subject of all the patches to include "ARM: dts:"
>>>> * Added reg property and interrupt property for "usb_otg_hs".
>>>> Previously these
>>>> were obtained from ti,hwmods property.
>>>> * Rebased on
>>>>
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>>>> devel-dt
>>>>
>>>> Changes from v1:
>>>> Just removed the omap-usb2 dt data and sent that as a separate patch.
>>>>
>>>> Kishon Vijay Abraham I (3):
>>>> ARM: dts: Add twl6030-usb data
>>>> ARM: dts: Add twl4030-usb data
>>>> ARM: dts: omap: Add usb_otg and glue data
>>>
>>> Thanks for the update. I've just pulled the series for 3.7.
>>
>> I wonder what happened to the patch #3 (Add usb_otg and glue data)
>> of this series? Why was it dropped? I cannot see it in 3.7 or 3.8-rc1.
I don't remember the context, can you repost it rebased on 3.8-rc2? Did
it generate some discussion at that time?
Benoit
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
2013-01-10 9:58 ` Benoit Cousson
@ 2013-01-10 10:53 ` kishon
0 siblings, 0 replies; 10+ messages in thread
From: kishon @ 2013-01-10 10:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thursday 10 January 2013 03:28 PM, Benoit Cousson wrote:
> Hi Kishon,
>
> On 01/10/2013 07:19 AM, kishon wrote:
>> On Friday 28 December 2012 12:05 AM, Aaro Koskinen wrote:
>>> Hi,
>>>
>>> On Thu, Sep 20, 2012 at 05:21:15AM +0200, Benoit Cousson wrote:
>>>> On 09/19/2012 11:32 AM, Kishon Vijay Abraham I wrote:
>>>>> This patch series adds dt data to get MUSB working in omap4 and omap3
>>>>>
>>>>> Changes from v2:
>>>>> * Changes the subject of all the patches to include "ARM: dts:"
>>>>> * Added reg property and interrupt property for "usb_otg_hs".
>>>>> Previously these
>>>>> were obtained from ti,hwmods property.
>>>>> * Rebased on
>>>>>
>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
>>>>> devel-dt
>>>>>
>>>>> Changes from v1:
>>>>> Just removed the omap-usb2 dt data and sent that as a separate patch.
>>>>>
>>>>> Kishon Vijay Abraham I (3):
>>>>> ARM: dts: Add twl6030-usb data
>>>>> ARM: dts: Add twl4030-usb data
>>>>> ARM: dts: omap: Add usb_otg and glue data
>>>>
>>>> Thanks for the update. I've just pulled the series for 3.7.
>>>
>>> I wonder what happened to the patch #3 (Add usb_otg and glue data)
>>> of this series? Why was it dropped? I cannot see it in 3.7 or 3.8-rc1.
>
> I don't remember the context, can you repost it rebased on 3.8-rc2? Did
> it generate some discussion at that time?
That patch also has SCM register. It might be rejected because of that.
Will work on the that.
Thanks
Kishon
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
@ 2013-01-25 10:26 Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Kishon Vijay Abraham I @ 2013-01-25 10:26 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds dt data to get MUSB working in omap4 and omap3.
Long time back a patch series with the same title was sent but only
a part of it got merged. The rest of it wasn't merged because of
adding omap control usb data to glue and usb phy.
Now there exists a separate driver for control usb and hence added a
separate dt node for control usb.
Changes from v2:
* Changed property names from "ti,has_mailbox" to "ti,has-mailbox",
"ctrl_module" to "ctrl-module", "usb_phy" to "usb-phy"
Changes from v1:
* "ti,has_mailbox" property is removed and "ti,type" property is added
and filled with value "1" to specify it has a mailbox
This series was developed on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
+ "usb: musb: add driver for control module" patch series
Did basic enumeration testing in omap4 panda, omap4 sdp and omap3 beagle.
Kishon Vijay Abraham I (3):
ARM: dts: omap: Add omap control usb data
ARM: dts: omap: Add omap-usb2 dt data
ARM: dts: omap: Add usb_otg and glue data
Documentation/devicetree/bindings/usb/omap-usb.txt | 2 ++
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 +++++
arch/arm/boot/dts/omap3-evm.dts | 6 +++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 +++++
arch/arm/boot/dts/omap3.dtsi | 12 +++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 +++++
arch/arm/boot/dts/omap4-sdp.dts | 6 +++++
arch/arm/boot/dts/omap4.dtsi | 26 ++++++++++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
9 files changed, 71 insertions(+), 1 deletion(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data
2013-01-25 10:26 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
@ 2013-01-25 10:26 ` Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 2/3] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2 siblings, 0 replies; 10+ messages in thread
From: Kishon Vijay Abraham I @ 2013-01-25 10:26 UTC (permalink / raw)
To: linux-arm-kernel
Add omap control usb data in omap4 device tree file. This will have the
register address of registers to power on the PHY and to write to
mailbox. The information about this data node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 739bb79..ffc7352 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -529,5 +529,13 @@
ti,hwmods = "timer11";
ti,timer-pwm;
};
+
+ omap_control_usb: omap-control-usb at 4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a00233c 0x4>;
+ reg-names = "control_dev_conf", "otghs_control";
+ ti,type = <1>;
+ };
};
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 2/3] ARM: dts: omap: Add omap-usb2 dt data
2013-01-25 10:26 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
@ 2013-01-25 10:26 ` Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2 siblings, 0 replies; 10+ messages in thread
From: Kishon Vijay Abraham I @ 2013-01-25 10:26 UTC (permalink / raw)
To: linux-arm-kernel
Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
connected to ocp2scp, omap-usb2 dt data is added as a child node
of ocp2scp. The information about this data node is availabe @
Documentation/devicetree/bindings/usb/usb-phy.txt
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index ffc7352..c829d7e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -438,6 +438,11 @@
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
+ usb2_phy: usb2phy at 4a0ad080 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a0ad080 0x58>;
+ ctrl-module = <&omap_control_usb>;
+ };
};
timer1: timer at 4a318000 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data
2013-01-25 10:26 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 2/3] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
@ 2013-01-25 10:26 ` Kishon Vijay Abraham I
2 siblings, 0 replies; 10+ messages in thread
From: Kishon Vijay Abraham I @ 2013-01-25 10:26 UTC (permalink / raw)
To: linux-arm-kernel
Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI), mode
which is mostly OTG, power that specifies the amount of power this can supply
when in host mode.
The information about usb otg node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 2 ++
arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++
arch/arm/boot/dts/omap3-evm.dts | 6 ++++++
arch/arm/boot/dts/omap3-overo.dtsi | 6 ++++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 6 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++
arch/arm/boot/dts/omap4.dtsi | 13 +++++++++++++
arch/arm/boot/dts/twl4030.dtsi | 2 +-
9 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index b36df59..b892f58 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
@@ -32,6 +33,7 @@ usb_otg_hs: usb_otg_hs at 4a0ab000 {
num_eps = <16>;
ram_bits = <12>;
ctrl-module = <&omap_control_usb>;
+ usb-phy = <&usb2_phy>;
};
Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..cb07583 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
*/
ti,pulldowns = <0x03a1c4>;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..afb9ba9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..4b3d157 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface_type = <0>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..176561b 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,17 @@
ti,timer-alwon;
ti,timer-secure;
};
+
+ usb_otg_hs: usb_otg_hs at 480ab000 {
+ compatible = "ti,omap3-musb";
+ reg = <0x480ab000 0x1000>;
+ interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupt-names = "mc", "dma";
+ ti,hwmods = "usb_otg_hs";
+ usb-phy = <&usb2_phy>;
+ multipoint = <1>;
+ num_eps = <16>;
+ ram_bits = <12>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..612c9bb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -206,3 +206,9 @@
&twl_usb_comparator {
usb-supply = <&vusb>;
};
+
+&usb_otg_hs {
+ interface_type = <1>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..582d7ee 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -428,3 +428,9 @@
&twl_usb_comparator {
usb-supply = <&vusb>;
};
+
+&usb_otg_hs {
+ interface_type = <1>;
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index c829d7e..ab817a2 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -542,5 +542,18 @@
reg-names = "control_dev_conf", "otghs_control";
ti,type = <1>;
};
+
+ usb_otg_hs: usb_otg_hs at 4a0ab000 {
+ compatible = "ti,omap4-musb";
+ reg = <0x4a0ab000 0x7ff>;
+ interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupt-names = "mc", "dma";
+ ti,hwmods = "usb_otg_hs";
+ usb-phy = <&usb2_phy>;
+ multipoint = <1>;
+ num_eps = <16>;
+ ram_bits = <12>;
+ ti,has-mailbox;
+ };
};
};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ed0bc95..398d2c3 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -67,7 +67,7 @@
#interrupt-cells = <1>;
};
- twl4030-usb {
+ usb2_phy: twl4030-usb {
compatible = "ti,twl4030-usb";
interrupts = <10>, <4>;
usb1v5-supply = <&vusb1v5>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-01-25 10:26 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-25 10:26 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 1/3] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 2/3] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2013-01-25 10:26 ` [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
-- strict thread matches above, loose matches on Subject: below --
2012-09-19 9:32 [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB Kishon Vijay Abraham I
2012-09-20 3:21 ` Benoit Cousson
2012-12-27 18:35 ` Aaro Koskinen
2013-01-10 6:19 ` kishon
2013-01-10 9:58 ` Benoit Cousson
2013-01-10 10:53 ` kishon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).