From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91/DT: remove atmel, use-dma-* from 9x5 and 9n12 USART nodes
Date: Wed, 30 Jan 2013 15:55:52 +0100 [thread overview]
Message-ID: <1359557752-21417-1-git-send-email-nicolas.ferre@atmel.com> (raw)
Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the
atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used.
Indeed the connexion between the DMA engine and the slave is not implemented
yet in Device Tree.
Note however that this property is also used for PDC (private DMA) on older
SoCs. This is why the driver alone cannot determine the validity of this
property.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 8 --------
arch/arm/boot/dts/at91sam9x5.dtsi | 6 ------
2 files changed, 14 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c6..4801717 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;
interrupts = <5 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -335,8 +333,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x4000>;
interrupts = <6 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -346,8 +342,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x4000>;
interrupts = <7 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
@@ -357,8 +351,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x4000>;
interrupts = <8 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 0c60090..d112c3a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -402,8 +402,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x200>;
interrupts = <5 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
@@ -413,8 +411,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8020000 0x200>;
interrupts = <6 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
@@ -424,8 +420,6 @@
compatible = "atmel,at91sam9260-usart";
reg = <0xf8024000 0x200>;
interrupts = <7 4 5>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
--
1.8.0
reply other threads:[~2013-01-30 14:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359557752-21417-1-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).