[PATCH 1/2] ARM i.MX6: Add regulator delay support

[b20788@freescale.com (Anson Huang)]

For ANATOP LDOs, vddcpu, vddsoc and vddpu
have step time settings in the misc2 register, need
to add necessary step time info for these three LDOs,
then regulator driver can add necessary delay based on
these settings.

offset 0x170:
bit [24-25]: vddcpu
bit [26-27]: vddpu
bit [28-29]: vddsoc

field definition:
0'b00: 64 cycles of 24M clock;
0'b01: 128 cycles of 24M clock;
0'b02: 256 cycles of 24M clock;
0'b03: 512 cycles of 24M clock;

Signed-off-by: Anson Huang <b20788@freescale.com>
---
 arch/arm/boot/dts/imx6q.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d6265ca..a2e977d 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -480,6 +480,9 @@
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <0>;
 					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
 					anatop-min-bit-val = <1>;
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
@@ -494,6 +497,9 @@
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
 					anatop-min-bit-val = <1>;
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
@@ -508,6 +514,9 @@
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <18>;
 					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
 					anatop-min-bit-val = <1>;
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
-- 
1.7.9.5