From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type
Date: Thu, 31 Jan 2013 10:01:09 +0100 [thread overview]
Message-ID: <1359622873-23345-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1359622873-23345-1-git-send-email-s.hauer@pengutronix.de>
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy.c | 10 ++++++++++
drivers/usb/usb-common.c | 36 ++++++++++++++++++++++++++++++++++++
include/linux/usb/of.h | 27 +++++++++++++++++++++++++++
include/linux/usb/otg.h | 7 +++++++
include/linux/usb/phy.h | 9 +++++++++
6 files changed, 90 insertions(+)
create mode 100644 include/linux/usb/of.h
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_OTG_UTILS) += phy.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index ef35eb0..3ad4b5c 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -1,3 +1,13 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/err.h>
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
const char *usb_speed_string(enum usb_device_speed speed)
{
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
}
EXPORT_SYMBOL_GPL(usb_speed_string);
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+ [USB_DR_MODE_UNKNOWN] = "",
+ [USB_DR_MODE_HOST] = "host",
+ [USB_DR_MODE_PERIPHERAL] = "peripheral",
+ [USB_DR_MODE_OTG] = "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+};
+
#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
#include <linux/notifier.h>
#include <linux/usb.h>
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
--
1.7.10.4
next prev parent reply other threads:[~2013-01-31 9:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-31 9:01 [PATCH v2] Add USB of helpers and use them in the chipidea driver Sascha Hauer
2013-01-31 9:01 ` [PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c Sascha Hauer
2013-01-31 9:16 ` kishon
2013-01-31 9:01 ` Sascha Hauer [this message]
2013-01-31 9:12 ` [PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type kishon
2013-01-31 9:28 ` Sascha Hauer
2013-01-31 9:30 ` kishon
2013-01-31 9:20 ` Greg KH
2013-01-31 9:26 ` Sascha Hauer
2013-01-31 10:01 ` Peter Chen
2013-01-31 10:12 ` Sascha Hauer
2013-01-31 9:01 ` [PATCH 3/6] USB: chipidea: ci13xxx-imx: create dynamic platformdata Sascha Hauer
2013-01-31 9:44 ` Peter Chen
2013-01-31 9:01 ` [PATCH 4/6] USB: chipidea: add PTW and PTS handling Sascha Hauer
2013-01-31 9:46 ` Peter Chen
2013-01-31 9:01 ` [PATCH 5/6] USB chipidea: introduce dual role mode pdata flags Sascha Hauer
2013-01-31 9:01 ` [PATCH 6/6] USB chipidea i.MX: introduce dr_mode property Sascha Hauer
2013-01-31 9:47 ` Peter Chen
-- strict thread matches above, loose matches on Subject: below --
2013-01-30 15:29 [PATCH] Add USB of helpers and use them in the chipidea driver Sascha Hauer
2013-01-30 15:29 ` [PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type Sascha Hauer
2013-01-31 2:30 ` Peter Chen
2013-01-31 8:05 ` Sascha Hauer
2013-01-31 6:14 ` kishon
2013-01-31 7:43 ` Sascha Hauer
2013-01-31 8:17 ` kishon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359622873-23345-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).