[PATCH v2] Add USB of helpers and use them in the chipidea driver

[PATCH v2] Add USB of helpers and use them in the chipidea driver

[Sascha Hauer]

changes since v1:

- move phy specific of helper to drivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- change usb_phy_dr_mode to usb_dr_mode
- change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTW

Sascha

----------------------------------------------------------------
Michael Grzeschik (3):
      USB: add devicetree helpers for determining dr_mode and phy_type
      USB: chipidea: ci13xxx-imx: create dynamic platformdata
      USB: chipidea: add PTW and PTS handling

Sascha Hauer (3):
      USB: move bulk of otg/otg.c to phy/phy.c
      USB chipidea: introduce dual role mode pdata flags
      USB chipidea i.MX: introduce dr_mode property

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
 drivers/usb/chipidea/bits.h                        |   14 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |   29 +-
 drivers/usb/chipidea/core.c                        |   60 ++-
 drivers/usb/otg/otg.c                              |  423 -------------------
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/phy.c                              |  434 ++++++++++++++++++++
 drivers/usb/usb-common.c                           |   36 ++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++
 include/linux/usb/otg.h                            |    7 +
 include/linux/usb/phy.h                            |    9 +
 12 files changed, 609 insertions(+), 441 deletions(-)
 create mode 100644 drivers/usb/phy/phy.c
 create mode 100644 include/linux/usb/of.h

[PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c

[Sascha Hauer]

Most of otg/otg.c is not otg specific, but phy specific, so move it
to the phy directory.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: kishon <kishon@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/otg/otg.c    |  423 ---------------------------------------------
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |  424 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 425 insertions(+), 423 deletions(-)
 create mode 100644 drivers/usb/phy/phy.c

diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index e181439..358cfd9 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -8,432 +8,9 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
-#include <linux/kernel.h>
 #include <linux/export.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-
 #include <linux/usb/otg.h>
 
-static LIST_HEAD(phy_list);
-static LIST_HEAD(phy_bind_list);
-static DEFINE_SPINLOCK(phy_lock);
-
-static struct usb_phy *__usb_find_phy(struct list_head *list,
-	enum usb_phy_type type)
-{
-	struct usb_phy  *phy = NULL;
-
-	list_for_each_entry(phy, list, head) {
-		if (phy->type != type)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__usb_find_phy_dev(struct device *dev,
-	struct list_head *list, u8 index)
-{
-	struct usb_phy_bind *phy_bind = NULL;
-
-	list_for_each_entry(phy_bind, list, list) {
-		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
-				phy_bind->index == index) {
-			if (phy_bind->phy)
-				return phy_bind->phy;
-			else
-				return ERR_PTR(-EPROBE_DEFER);
-		}
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__of_usb_find_phy(struct device_node *node)
-{
-	struct usb_phy  *phy;
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (node != phy->dev->of_node)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static void devm_usb_phy_release(struct device *dev, void *res)
-{
-	struct usb_phy *phy = *(struct usb_phy **)res;
-
-	usb_put_phy(phy);
-}
-
-static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
-{
-	return res == match_data;
-}
-
-/**
- * devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
- *
- * Gets the phy using usb_get_phy(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy(type);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy);
-
-/**
- * usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver of type %s\n",
-			usb_phy_type_string(type));
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy);
-
- /**
- * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
- *
- * Returns the phy driver associated with the given phandle value,
- * after getting a refcount to it, -ENODEV if there is no such phy or
- * -EPROBE_DEFER if there is a phandle to the phy, but the device is
- * not yet loaded. While at that, it also associates the device with
- * the phy using devres. On driver detach, release function is invoked
- * on the devres data, then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
-	const char *phandle, u8 index)
-{
-	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
-	unsigned long	flags;
-	struct device_node *node;
-
-	if (!dev->of_node) {
-		dev_dbg(dev, "device does not have a device node entry\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	node = of_parse_phandle(dev->of_node, phandle, index);
-	if (!node) {
-		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
-			dev->of_node->full_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr) {
-		dev_dbg(dev, "failed to allocate memory for devres\n");
-		goto err0;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __of_usb_find_phy(node);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		phy = ERR_PTR(-EPROBE_DEFER);
-		devres_free(ptr);
-		goto err1;
-	}
-
-	*ptr = phy;
-	devres_add(dev, ptr);
-
-	get_device(phy->dev);
-
-err1:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-err0:
-	of_node_put(node);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
-
-/**
- * usb_get_phy_dev - find the USB PHY
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver\n");
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy_dev);
-
-/**
- * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Gets the phy using usb_get_phy_dev(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy_dev(dev, index);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
-
-/**
- * devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
- *
- * destroys the devres associated with this phy and invokes usb_put_phy
- * to release the phy.
- *
- * For use by USB host and peripheral drivers.
- */
-void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
-{
-	int r;
-
-	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
-	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
-}
-EXPORT_SYMBOL(devm_usb_put_phy);
-
-/**
- * usb_put_phy - release the USB PHY
- * @x: the phy returned by usb_get_phy()
- *
- * Releases a refcount the caller received from usb_get_phy().
- *
- * For use by USB host and peripheral drivers.
- */
-void usb_put_phy(struct usb_phy *x)
-{
-	if (x)
-		put_device(x->dev);
-}
-EXPORT_SYMBOL(usb_put_phy);
-
-/**
- * usb_add_phy - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
-{
-	int		ret = 0;
-	unsigned long	flags;
-	struct usb_phy	*phy;
-
-	if (x->type != USB_PHY_TYPE_UNDEFINED) {
-		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (phy->type == type) {
-			ret = -EBUSY;
-			dev_err(x->dev, "transceiver type %s already exists\n",
-						usb_phy_type_string(type));
-			goto out;
-		}
-	}
-
-	x->type = type;
-	list_add_tail(&x->head, &phy_list);
-
-out:
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(usb_add_phy);
-
-/**
- * usb_add_phy_dev - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy_dev(struct usb_phy *x)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	if (!x->dev) {
-		dev_err(x->dev, "no device provided for PHY\n");
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_for_each_entry(phy_bind, &phy_bind_list, list)
-		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
-			phy_bind->phy = x;
-
-	list_add_tail(&x->head, &phy_list);
-
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(usb_add_phy_dev);
-
-/**
- * usb_remove_phy - remove the OTG PHY
- * @x: the USB OTG PHY to be removed;
- *
- * This reverts the effects of usb_add_phy
- */
-void usb_remove_phy(struct usb_phy *x)
-{
-	unsigned long	flags;
-	struct usb_phy_bind *phy_bind;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	if (x) {
-		list_for_each_entry(phy_bind, &phy_bind_list, list)
-			if (phy_bind->phy == x)
-				phy_bind->phy = NULL;
-		list_del(&x->head);
-	}
-	spin_unlock_irqrestore(&phy_lock, flags);
-}
-EXPORT_SYMBOL(usb_remove_phy);
-
-/**
- * usb_bind_phy - bind the phy and the controller that uses the phy
- * @dev_name: the device name of the device that will bind to the phy
- * @index: index to specify the port number
- * @phy_dev_name: the device name of the phy
- *
- * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
- * be used when the phy driver registers the phy and when the controller
- * requests this phy.
- *
- * To be used by platform specific initialization code.
- */
-int __init usb_bind_phy(const char *dev_name, u8 index,
-				const char *phy_dev_name)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
-	if (!phy_bind) {
-		pr_err("phy_bind(): No memory for phy_bind");
-		return -ENOMEM;
-	}
-
-	phy_bind->dev_name = dev_name;
-	phy_bind->phy_dev_name = phy_dev_name;
-	phy_bind->index = index;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_add_tail(&phy_bind->list, &phy_bind_list);
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_bind_phy);
-
 const char *otg_state_string(enum usb_otg_state state)
 {
 	switch (state) {
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..9fa6327 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,6 +4,7 @@
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
new file mode 100644
index 0000000..ef35eb0
--- /dev/null
+++ b/drivers/usb/phy/phy.c
@@ -0,0 +1,424 @@
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+static LIST_HEAD(phy_list);
+static LIST_HEAD(phy_bind_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+	enum usb_phy_type type)
+{
+	struct usb_phy  *phy = NULL;
+
+	list_for_each_entry(phy, list, head) {
+		if (phy->type != type)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__usb_find_phy_dev(struct device *dev,
+	struct list_head *list, u8 index)
+{
+	struct usb_phy_bind *phy_bind = NULL;
+
+	list_for_each_entry(phy_bind, list, list) {
+		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
+				phy_bind->index == index) {
+			if (phy_bind->phy)
+				return phy_bind->phy;
+			else
+				return ERR_PTR(-EPROBE_DEFER);
+		}
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+	struct usb_phy  *phy;
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (node != phy->dev->of_node)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+	struct usb_phy *phy = *(struct usb_phy **)res;
+
+	usb_put_phy(phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+	return res == match_data;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev - device that requests this phy
+ * @type - the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy(type);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type - the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy(&phy_list, type);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver of type %s\n",
+			usb_phy_type_string(type));
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy);
+
+ /**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev - device that requests this phy
+ * @phandle - name of the property holding the phy phandle value
+ * @index - the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+	const char *phandle, u8 index)
+{
+	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
+	unsigned long	flags;
+	struct device_node *node;
+
+	if (!dev->of_node) {
+		dev_dbg(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, phandle, index);
+	if (!node) {
+		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr) {
+		dev_dbg(dev, "failed to allocate memory for devres\n");
+		goto err0;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __of_usb_find_phy(node);
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+		phy = ERR_PTR(-EPROBE_DEFER);
+		devres_free(ptr);
+		goto err1;
+	}
+
+	*ptr = phy;
+	devres_add(dev, ptr);
+
+	get_device(phy->dev);
+
+err1:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+	of_node_put(node);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
+
+/**
+ * usb_get_phy_dev - find the USB PHY
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver\n");
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy_dev);
+
+/**
+ * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Gets the phy using usb_get_phy_dev(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy_dev(dev, index);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_dev);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev - device that wants to release this phy
+ * @phy - the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+	if (x)
+		put_device(x->dev);
+}
+EXPORT_SYMBOL(usb_put_phy);
+
+/**
+ * usb_add_phy - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type - the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+	int		ret = 0;
+	unsigned long	flags;
+	struct usb_phy	*phy;
+
+	if (x->type != USB_PHY_TYPE_UNDEFINED) {
+		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (phy->type == type) {
+			ret = -EBUSY;
+			dev_err(x->dev, "transceiver type %s already exists\n",
+						usb_phy_type_string(type));
+			goto out;
+		}
+	}
+
+	x->type = type;
+	list_add_tail(&x->head, &phy_list);
+
+out:
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(usb_add_phy);
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	if (!x->dev) {
+		dev_err(x->dev, "no device provided for PHY\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_for_each_entry(phy_bind, &phy_bind_list, list)
+		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
+			phy_bind->phy = x;
+
+	list_add_tail(&x->head, &phy_list);
+
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+	unsigned long	flags;
+	struct usb_phy_bind *phy_bind;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	if (x) {
+		list_for_each_entry(phy_bind, &phy_bind_list, list)
+			if (phy_bind->phy == x)
+				phy_bind->phy = NULL;
+		list_del(&x->head);
+	}
+	spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL(usb_remove_phy);
+
+/**
+ * usb_bind_phy - bind the phy and the controller that uses the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @index: index to specify the port number
+ * @phy_dev_name: the device name of the phy
+ *
+ * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
+ * be used when the phy driver registers the phy and when the controller
+ * requests this phy.
+ *
+ * To be used by platform specific initialization code.
+ */
+int __init usb_bind_phy(const char *dev_name, u8 index,
+				const char *phy_dev_name)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
+	if (!phy_bind) {
+		pr_err("phy_bind(): No memory for phy_bind");
+		return -ENOMEM;
+	}
+
+	phy_bind->dev_name = dev_name;
+	phy_bind->phy_dev_name = phy_dev_name;
+	phy_bind->index = index;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_add_tail(&phy_bind->list, &phy_bind_list);
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_bind_phy);
-- 
1.7.10.4

[PATCH 1/6] USB: move bulk of otg/otg.c to phy/phy.c

[kishon]

Hi,

On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
> Most of otg/otg.c is not otg specific, but phy specific, so move it
> to the phy directory.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Reported-by: kishon <kishon@ti.com>

Kishon Vijay Abraham I <kishon@ti.com> pls..

Thanks
Kishon

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |   10 ++++++++++
 drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 90 insertions(+)
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index ef35eb0..3ad4b5c 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -1,3 +1,13 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/err.h>
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[kishon]

Hi,

On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>   drivers/usb/phy/Makefile |    1 +
>   drivers/usb/phy/phy.c    |   10 ++++++++++
>   drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>   include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>   include/linux/usb/otg.h  |    7 +++++++
>   include/linux/usb/phy.h  |    9 +++++++++
>   6 files changed, 90 insertions(+)
>   create mode 100644 include/linux/usb/of.h
>
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 9fa6327..e1be1e8 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,6 +5,7 @@
>   ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>
>   obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> +obj-$(CONFIG_OF)			+= of.o

You've missed doing "git add ..usb/phy/of.c".

>   obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>   obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>   obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> index ef35eb0..3ad4b5c 100644
> --- a/drivers/usb/phy/phy.c
> +++ b/drivers/usb/phy/phy.c
> @@ -1,3 +1,13 @@
> +/*
> + * phy.c -- USB phy handling
> + *
> + * Copyright (C) 2004 Texas Instruments

it's 2013 already :-P
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.

But your *MODULE_LICENSE("GPL")* below tells it's only GPL.
> + */
.
.
<snip>
.
.

>   MODULE_LICENSE("GPL");

Thanks
Kishon

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 02:42:48PM +0530, kishon wrote:
> Hi,
> 
> On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
> >From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >
> >This adds two little devicetree helper functions for determining the
> >dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> >the devicetree.
> >
> >Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> >Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> >Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> >---
> >  drivers/usb/phy/Makefile |    1 +
> >  drivers/usb/phy/phy.c    |   10 ++++++++++
> >  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++++
> >  include/linux/usb/phy.h  |    9 +++++++++
> >  6 files changed, 90 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> >
> >diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> >index 9fa6327..e1be1e8 100644
> >--- a/drivers/usb/phy/Makefile
> >+++ b/drivers/usb/phy/Makefile
> >@@ -5,6 +5,7 @@
> >  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
> >
> >  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> >+obj-$(CONFIG_OF)			+= of.o
> 
> You've missed doing "git add ..usb/phy/of.c".
> 
> >  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
> >  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
> >  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> >diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> >index ef35eb0..3ad4b5c 100644
> >--- a/drivers/usb/phy/phy.c
> >+++ b/drivers/usb/phy/phy.c
> >@@ -1,3 +1,13 @@
> >+/*
> >+ * phy.c -- USB phy handling
> >+ *
> >+ * Copyright (C) 2004 Texas Instruments
> 
> it's 2013 already :-P
> >+ *
> >+ * This program is free software; you can redistribute it and/or modify
> >+ * it under the terms of the GNU General Public License as published by
> >+ * the Free Software Foundation; either version 2 of the License, or
> >+ * (at your option) any later version.
> 
> But your *MODULE_LICENSE("GPL")* below tells it's only GPL.

The MODULE_LICENSE("GPL") is in usb-common.c, not in the file I added.

Sascha

> .
> <snip>
> .
> .
> 
> >  MODULE_LICENSE("GPL");
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[kishon]

On Thursday 31 January 2013 02:58 PM, Sascha Hauer wrote:
> On Thu, Jan 31, 2013 at 02:42:48PM +0530, kishon wrote:
>> Hi,
>>
>> On Thursday 31 January 2013 02:31 PM, Sascha Hauer wrote:
>>> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>>
>>> This adds two little devicetree helper functions for determining the
>>> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
>>> the devicetree.
>>>
>>> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
>>> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
>>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>>> ---
>>>   drivers/usb/phy/Makefile |    1 +
>>>   drivers/usb/phy/phy.c    |   10 ++++++++++
>>>   drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>>>   include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>>>   include/linux/usb/otg.h  |    7 +++++++
>>>   include/linux/usb/phy.h  |    9 +++++++++
>>>   6 files changed, 90 insertions(+)
>>>   create mode 100644 include/linux/usb/of.h
>>>
>>> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
>>> index 9fa6327..e1be1e8 100644
>>> --- a/drivers/usb/phy/Makefile
>>> +++ b/drivers/usb/phy/Makefile
>>> @@ -5,6 +5,7 @@
>>>   ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>>>
>>>   obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
>>> +obj-$(CONFIG_OF)			+= of.o
>>
>> You've missed doing "git add ..usb/phy/of.c".
>>
>>>   obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>>>   obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>>>   obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
>>> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
>>> index ef35eb0..3ad4b5c 100644
>>> --- a/drivers/usb/phy/phy.c
>>> +++ b/drivers/usb/phy/phy.c
>>> @@ -1,3 +1,13 @@
>>> +/*
>>> + * phy.c -- USB phy handling
>>> + *
>>> + * Copyright (C) 2004 Texas Instruments
>>
>> it's 2013 already :-P
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>
>> But your *MODULE_LICENSE("GPL")* below tells it's only GPL.
>
> The MODULE_LICENSE("GPL") is in usb-common.c, not in the file I added.

huh.. just noticed. sorry for the noise.

Thanks
Kishon

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Greg KH]

On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> This adds two little devicetree helper functions for determining the
> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> the devicetree.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/usb/phy/Makefile |    1 +
>  drivers/usb/phy/phy.c    |   10 ++++++++++
>  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
>  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
>  include/linux/usb/otg.h  |    7 +++++++
>  include/linux/usb/phy.h  |    9 +++++++++
>  6 files changed, 90 insertions(+)
>  create mode 100644 include/linux/usb/of.h
> 
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 9fa6327..e1be1e8 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -5,6 +5,7 @@
>  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
>  
>  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> +obj-$(CONFIG_OF)			+= of.o
>  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
>  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
>  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> index ef35eb0..3ad4b5c 100644
> --- a/drivers/usb/phy/phy.c
> +++ b/drivers/usb/phy/phy.c
> @@ -1,3 +1,13 @@
> +/*
> + * phy.c -- USB phy handling
> + *
> + * Copyright (C) 2004 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */

Do you really mean to change the license of the file from GPLv2 to
GPLv2+?  Did TI agree to that licening change?  I need some
documentation from some TI people before I can ever accept something
like this.

thanks,

greg k-h

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 10:20:59AM +0100, Greg KH wrote:
> On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > This adds two little devicetree helper functions for determining the
> > dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
> > the devicetree.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  drivers/usb/phy/Makefile |    1 +
> >  drivers/usb/phy/phy.c    |   10 ++++++++++
> >  drivers/usb/usb-common.c |   36 ++++++++++++++++++++++++++++++++++++
> >  include/linux/usb/of.h   |   27 +++++++++++++++++++++++++++
> >  include/linux/usb/otg.h  |    7 +++++++
> >  include/linux/usb/phy.h  |    9 +++++++++
> >  6 files changed, 90 insertions(+)
> >  create mode 100644 include/linux/usb/of.h
> > 
> > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> > index 9fa6327..e1be1e8 100644
> > --- a/drivers/usb/phy/Makefile
> > +++ b/drivers/usb/phy/Makefile
> > @@ -5,6 +5,7 @@
> >  ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
> >  
> >  obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
> > +obj-$(CONFIG_OF)			+= of.o
> >  obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
> >  obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
> >  obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
> > diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
> > index ef35eb0..3ad4b5c 100644
> > --- a/drivers/usb/phy/phy.c
> > +++ b/drivers/usb/phy/phy.c
> > @@ -1,3 +1,13 @@
> > +/*
> > + * phy.c -- USB phy handling
> > + *
> > + * Copyright (C) 2004 Texas Instruments
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> 
> Do you really mean to change the license of the file from GPLv2 to
> GPLv2+?  Did TI agree to that licening change?  I need some
> documentation from some TI people before I can ever accept something
> like this.

Sorry, the hunk above belongs to patch 1/6. I did not change the
license, the header is a copy from drivers/usb/otg/otg.c which was
GPLv2+ already.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Peter Chen]

On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> 
> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> +		if (!strcmp(dr_mode, usb_dr_modes[i]))
> +			return i;

if (strcmp(dr_mode, usb_dr_modes[i]) == 0) may be more friendly.

> +
> +#ifndef __LINUX_USB_OF_H
> +#define __LINUX_USB_OF_H
> +
> +#include <linux/usb/phy.h>
> +
> +#ifdef CONFIG_OF
> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);

Will you put definition to phy.c, I can't find it at this version

> index e8a5fe8..4e8bfbb 100644
> --- a/include/linux/usb/otg.h
> +++ b/include/linux/usb/otg.h
> @@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
>  /* for OTG controller drivers (and maybe other stuff) */
>  extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
>  
> +enum usb_dr_mode {
> +	USB_DR_MODE_UNKNOWN,
> +	USB_DR_MODE_HOST,
> +	USB_DR_MODE_PERIPHERAL,
> +	USB_DR_MODE_OTG,
> +};
> +

I am not sure if otg.h is a good place to put this, in fact, we need
a common header file for it.
-- 

Best Regards,
Peter Chen

[PATCH 2/6] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Thu, Jan 31, 2013 at 06:01:08PM +0800, Peter Chen wrote:
> On Thu, Jan 31, 2013 at 10:01:09AM +0100, Sascha Hauer wrote:
> > From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > 
> > 
> > +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
> > +		if (!strcmp(dr_mode, usb_dr_modes[i]))
> > +			return i;
> 
> if (strcmp(dr_mode, usb_dr_modes[i]) == 0) may be more friendly.
> 
> > +
> > +#ifndef __LINUX_USB_OF_H
> > +#define __LINUX_USB_OF_H
> > +
> > +#include <linux/usb/phy.h>
> > +
> > +#ifdef CONFIG_OF
> > +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
> 
> Will you put definition to phy.c, I can't find it at this version

This goes to drivers/usb/phy/of.c Sorry, as Kishon noted I missed to git
add the file. See the attached updated patch.

> 
> > index e8a5fe8..4e8bfbb 100644
> > --- a/include/linux/usb/otg.h
> > +++ b/include/linux/usb/otg.h
> > @@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
> >  /* for OTG controller drivers (and maybe other stuff) */
> >  extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
> >  
> > +enum usb_dr_mode {
> > +	USB_DR_MODE_UNKNOWN,
> > +	USB_DR_MODE_HOST,
> > +	USB_DR_MODE_PERIPHERAL,
> > +	USB_DR_MODE_OTG,
> > +};
> > +
> 
> I am not sure if otg.h is a good place to put this, in fact, we need
> a common header file for it.

Well linux/usb/otg.h is at least a header which can be included safely
by everyone interested in usb_dr_mode. Anyway, I'm open for better
suggestions, I just hesitated to add a new file just for this enum.

Sascha


>From 19c1a6552d6aa93f5ff354a224de0679d55a8126 Mon Sep 17 00:00:00 2001
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Tue, 6 Nov 2012 16:10:10 +0100
Subject: [PATCH] USB: add devicetree helpers for determining dr_mode and
 phy_type

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/of.c     |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/usb-common.c |   36 +++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 ++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 127 insertions(+)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_UNKNOWN]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 3/6] USB: chipidea: ci13xxx-imx: create dynamic platformdata

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch removes the limitation of having only one instance of the
ci13xxx-imx platformdata and makes different configurations possible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8c29122..69024e0 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
-	.name			= "ci13xxx_imx",
-	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
-				  CI13XXX_DISABLE_STREAMING,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
 static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
+	struct ci13xxx_platform_data *pdata;
 	struct platform_device *plat_ci, *phy_pdev;
 	struct device_node *phy_np;
 	struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		&& !usbmisc_ops)
 		return -EPROBE_DEFER;
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
+		return -ENOMEM;
+	}
+
+	pdata->name = "ci13xxx_imx";
+	pdata->capoffset = DEF_CAPOFFSET;
+	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
+		       CI13XXX_PULLUP_ON_VBUS |
+		       CI13XXX_DISABLE_STREAMING;
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		reg_vbus = NULL;
 	}
 
-	ci13xxx_imx_platdata.phy = data->phy;
+	pdata->phy = data->phy;
 
 	if (!pdev->dev.dma_mask) {
 		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,
-				&ci13xxx_imx_platdata);
+				pdata);
 	if (IS_ERR(plat_ci)) {
 		ret = PTR_ERR(plat_ci);
 		dev_err(&pdev->dev,
-- 
1.7.10.4

[PATCH 3/6] USB: chipidea: ci13xxx-imx: create dynamic platformdata

[Peter Chen]

On Thu, Jan 31, 2013 at 10:01:10AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> This patch removes the limitation of having only one instance of the
> ci13xxx-imx platformdata and makes different configurations possible.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
>  1 file changed, 15 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index 8c29122..69024e0 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
>  
>  /* End of common functions shared by usbmisc drivers*/
>  
> -static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
> -	.name			= "ci13xxx_imx",
> -	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
> -				  CI13XXX_PULLUP_ON_VBUS |
> -				  CI13XXX_DISABLE_STREAMING,
> -	.capoffset		= DEF_CAPOFFSET,
> -};
> -
>  static int ci13xxx_imx_probe(struct platform_device *pdev)
>  {
>  	struct ci13xxx_imx_data *data;
> +	struct ci13xxx_platform_data *pdata;
>  	struct platform_device *plat_ci, *phy_pdev;
>  	struct device_node *phy_np;
>  	struct resource *res;
> @@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
>  		&& !usbmisc_ops)
>  		return -EPROBE_DEFER;
>  
> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
> +		return -ENOMEM;
> +	}
> +
> +	pdata->name = "ci13xxx_imx";
> +	pdata->capoffset = DEF_CAPOFFSET;
> +	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
> +		       CI13XXX_PULLUP_ON_VBUS |
> +		       CI13XXX_DISABLE_STREAMING;
> +
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data) {
>  		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
> @@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
>  		reg_vbus = NULL;
>  	}
>  
> -	ci13xxx_imx_platdata.phy = data->phy;
> +	pdata->phy = data->phy;
>  
>  	if (!pdev->dev.dma_mask) {
>  		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
> @@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
>  
>  	plat_ci = ci13xxx_add_device(&pdev->dev,
>  				pdev->resource, pdev->num_resources,
> -				&ci13xxx_imx_platdata);
> +				pdata);
>  	if (IS_ERR(plat_ci)) {
>  		ret = PTR_ERR(plat_ci);
>  		dev_err(&pdev->dev,
> -- 
> 1.7.10.4
> 
> 

Reviewed-by: Peter Chen <peter.chen@freescale.com>
-- 

Best Regards,
Peter Chen

[PATCH 4/6] USB: chipidea: add PTW and PTS handling

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch makes it possible to configure the PTW and PTS bits inside
the portsc register for host and device mode before the driver starts
and the phy can be addressed as hardware implementation is designed.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    5 +++
 drivers/usb/chipidea/bits.h                        |   14 ++++++-
 drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
 drivers/usb/chipidea/core.c                        |   39 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    1 +
 5 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 5778b9c..dd42ccd 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -5,6 +5,11 @@ Required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain controller interrupt
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
 - fsl,usbmisc: phandler of non-core register device, with one argument
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 050de85..d8ffc2f 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -48,10 +48,22 @@
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PTS(d)         ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
+#define PORTSC_PTW            BIT(28)
 
 /* DEVLC */
 #define DEVLC_PSPD            (0x03UL << 25)
-#define    DEVLC_PSPD_HS      (0x02UL << 25)
+#define DEVLC_PSPD_HS         (0x02UL << 25)
+#define DEVLC_PTW             BIT(27)
+#define DEVLC_STS             BIT(28)
+#define DEVLC_PTS(d)          (((d) & 0x7) << 29)
+
+/* Encoding for DEVLC_PTS and PORTSC_PTS */
+#define PTS_UTMI              0
+#define PTS_ULPI              2
+#define PTS_SERIAL            3
+#define PTS_HSIC              4
 
 /* OTGSC */
 #define OTGSC_IDPU	      BIT(5)
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 69024e0..ebc1148 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/usb/of.h>
 
 #include "ci.h"
 #include "ci13xxx_imx.h"
@@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_PULLUP_ON_VBUS |
 		       CI13XXX_DISABLE_STREAMING;
 
+	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 57cae1f..a3ec29d 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -67,6 +67,8 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/phy.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -211,6 +213,41 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	return 0;
 }
 
+static void hw_phymode_configure(struct ci13xxx *ci)
+{
+	u32 portsc, lpm;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS(PTS_UTMI);
+		lpm = DEVLC_PTS(PTS_UTMI);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS(PTS_ULPI);
+		lpm = DEVLC_PTS(PTS_ULPI);
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS(PTS_SERIAL);
+		lpm = DEVLC_PTS(PTS_SERIAL);
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS(PTS_HSIC);
+		lpm = DEVLC_PTS(PTS_HSIC);
+		break;
+	default:
+		return;
+	}
+
+	if (ci->hw_bank.lpm)
+		hw_write(ci, OP_PORTSC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+	else
+		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+}
+
 /**
  * hw_device_reset: resets chip (execute without interruption)
  * @ci: the controller
@@ -476,6 +513,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
+	hw_phymode_configure(ci);
+
 	ret = ci_role_start(ci, ci->role);
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..1a2aa18 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -14,6 +14,7 @@ struct ci13xxx_platform_data {
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
 	struct usb_phy	*phy;
+	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.10.4

[PATCH 4/6] USB: chipidea: add PTW and PTS handling

[Peter Chen]

On Thu, Jan 31, 2013 at 10:01:11AM +0100, Sascha Hauer wrote:
> From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> 
> This patch makes it possible to configure the PTW and PTS bits inside
> the portsc register for host and device mode before the driver starts
> and the phy can be addressed as hardware implementation is designed.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |    5 +++
>  drivers/usb/chipidea/bits.h                        |   14 ++++++-
>  drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
>  drivers/usb/chipidea/core.c                        |   39 ++++++++++++++++++++
>  include/linux/usb/chipidea.h                       |    1 +
>  5 files changed, 61 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index 5778b9c..dd42ccd 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -5,6 +5,11 @@ Required properties:
>  - reg: Should contain registers location and length
>  - interrupts: Should contain controller interrupt
>  
> +Recommended properies:
> +- phy_type: the type of the phy connected to the core. Should be one
> +  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> +  property the PORTSC register won't be touched
> +
>  Optional properties:
>  - fsl,usbphy: phandler of usb phy that connects to the only one port
>  - fsl,usbmisc: phandler of non-core register device, with one argument
> diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> index 050de85..d8ffc2f 100644
> --- a/drivers/usb/chipidea/bits.h
> +++ b/drivers/usb/chipidea/bits.h
> @@ -48,10 +48,22 @@
>  #define PORTSC_SUSP           BIT(7)
>  #define PORTSC_HSP            BIT(9)
>  #define PORTSC_PTC            (0x0FUL << 16)
> +/* PTS and PTW for non lpm version only */
> +#define PORTSC_PTS(d)         ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
> +#define PORTSC_PTW            BIT(28)
>  
>  /* DEVLC */
>  #define DEVLC_PSPD            (0x03UL << 25)
> -#define    DEVLC_PSPD_HS      (0x02UL << 25)
> +#define DEVLC_PSPD_HS         (0x02UL << 25)
> +#define DEVLC_PTW             BIT(27)
> +#define DEVLC_STS             BIT(28)
> +#define DEVLC_PTS(d)          (((d) & 0x7) << 29)
> +
> +/* Encoding for DEVLC_PTS and PORTSC_PTS */
> +#define PTS_UTMI              0
> +#define PTS_ULPI              2
> +#define PTS_SERIAL            3
> +#define PTS_HSIC              4
>  
>  /* OTGSC */
>  #define OTGSC_IDPU	      BIT(5)
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index 69024e0..ebc1148 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -21,6 +21,7 @@
>  #include <linux/clk.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/usb/of.h>
>  
>  #include "ci.h"
>  #include "ci13xxx_imx.h"
> @@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
>  		       CI13XXX_PULLUP_ON_VBUS |
>  		       CI13XXX_DISABLE_STREAMING;
>  
> +	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
> +
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data) {
>  		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 57cae1f..a3ec29d 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -67,6 +67,8 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/otg.h>
>  #include <linux/usb/chipidea.h>
> +#include <linux/usb/of.h>
> +#include <linux/phy.h>
>  
>  #include "ci.h"
>  #include "udc.h"
> @@ -211,6 +213,41 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
>  	return 0;
>  }
>  
> +static void hw_phymode_configure(struct ci13xxx *ci)
> +{
> +	u32 portsc, lpm;
> +
> +	switch (ci->platdata->phy_mode) {
> +	case USBPHY_INTERFACE_MODE_UTMI:
> +		portsc = PORTSC_PTS(PTS_UTMI);
> +		lpm = DEVLC_PTS(PTS_UTMI);
> +		break;
> +	case USBPHY_INTERFACE_MODE_UTMIW:
> +		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
> +		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
> +		break;
> +	case USBPHY_INTERFACE_MODE_ULPI:
> +		portsc = PORTSC_PTS(PTS_ULPI);
> +		lpm = DEVLC_PTS(PTS_ULPI);
> +		break;
> +	case USBPHY_INTERFACE_MODE_SERIAL:
> +		portsc = PORTSC_PTS(PTS_SERIAL);
> +		lpm = DEVLC_PTS(PTS_SERIAL);
> +		break;
> +	case USBPHY_INTERFACE_MODE_HSIC:
> +		portsc = PORTSC_PTS(PTS_HSIC);
> +		lpm = DEVLC_PTS(PTS_HSIC);
> +		break;
> +	default:
> +		return;
> +	}
> +
> +	if (ci->hw_bank.lpm)
> +		hw_write(ci, OP_PORTSC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
> +	else
> +		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
> +}
> +
It is ok for no_lpm controller (Freescale's)
>  /**
>   * hw_device_reset: resets chip (execute without interruption)
>   * @ci: the controller
> @@ -476,6 +513,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
>  			: CI_ROLE_GADGET;
>  	}
>  
> +	hw_phymode_configure(ci);
> +
>  	ret = ci_role_start(ci, ci->role);
>  	if (ret) {
>  		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 544825d..1a2aa18 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -14,6 +14,7 @@ struct ci13xxx_platform_data {
>  	uintptr_t	 capoffset;
>  	unsigned	 power_budget;
>  	struct usb_phy	*phy;
> +	enum usb_phy_interface phy_mode;
>  	unsigned long	 flags;
>  #define CI13XXX_REGS_SHARED		BIT(0)
>  #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
> -- 
> 1.7.10.4
> 
> 

-- 

Best Regards,
Peter Chen

[PATCH 5/6] USB chipidea: introduce dual role mode pdata flags

[Sascha Hauer]

Even if a chipidea core is otg capable the board may not. This allows
to explicitly set the core to host/peripheral mode. Without these
flags the driver falls back to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/core.c  |   21 +++++++++++++++------
 include/linux/usb/chipidea.h |    2 +-
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a3ec29d..b2dbf55 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	struct resource	*res;
 	void __iomem	*base;
 	int		ret;
+	int		dr_mode;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -487,14 +488,22 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	dr_mode = ci->platdata->dr_mode;
+	if (dr_mode == USB_DR_MODE_UNKNOWN)
+		dr_mode = USB_DR_MODE_OTG;
+
 	/* initialize role(s) before the interrupt is requested */
-	ret = ci_hdrc_host_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support host\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support host\n");
+	}
 
-	ret = ci_hdrc_gadget_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support gadget\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support gadget\n");
+	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 1a2aa18..b314647 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
-
+	enum usb_dr_mode	dr_mode;
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
 	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
-- 
1.7.10.4

[PATCH 6/6] USB chipidea i.MX: introduce dr_mode property

[Sascha Hauer]

The dr_mode devicetree property allows to explicitly specify the
host/peripheral/otg mode. This is necessary for boards without proper
ID pin handling.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt |    1 +
 drivers/usb/chipidea/ci13xxx_imx.c                    |    1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index dd42ccd..493a414 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -9,6 +9,7 @@ Recommended properies:
 - phy_type: the type of the phy connected to the core. Should be one
   of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
   property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
 
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index ebc1148..b598bb8f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_DISABLE_STREAMING;
 
 	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
-- 
1.7.10.4

[PATCH 6/6] USB chipidea i.MX: introduce dr_mode property

[Peter Chen]

On Thu, Jan 31, 2013 at 10:01:13AM +0100, Sascha Hauer wrote:
> The dr_mode devicetree property allows to explicitly specify the
> host/peripheral/otg mode. This is necessary for boards without proper
> ID pin handling.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/usb/ci13xxx-imx.txt |    1 +
>  drivers/usb/chipidea/ci13xxx_imx.c                    |    1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> index dd42ccd..493a414 100644
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> @@ -9,6 +9,7 @@ Recommended properies:
>  - phy_type: the type of the phy connected to the core. Should be one
>    of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
>    property the PORTSC register won't be touched
> +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
>  
>  Optional properties:
>  - fsl,usbphy: phandler of usb phy that connects to the only one port
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
> index ebc1148..b598bb8f 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
>  		       CI13XXX_DISABLE_STREAMING;
>  
>  	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
> +	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
>  
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data) {
Reviewed-by: Peter Chen <peter.chen@freescale.com>
> -- 
> 1.7.10.4
> 
> 

-- 

Best Regards,
Peter Chen

[PATCH] Add USB of helpers and use them in the chipidea driver

[Sascha Hauer]

This is the 2nd version of the USB of helper patch, this time with
adding support for the chipidea driver for the new properties.

Kishon, I decided against adding an extra Kconfig option for the
OF helpers since I found out the USB stuff already has enough options ;)

The helpers are now in usb-common.c which seems an appropriate place
for them. For the phy_type helpers I had a look again and saw that
it is not really phy specific, the PORTSC registers in the chipidea
driver have to be configured even without phy support compiled in.

Sascha

----------------------------------------------------------------
Michael Grzeschik (3):
      usb: add devicetree helpers for determining dr_mode and phy_type
      usb: chipidea: ci13xxx-imx: create dynamic platformdata
      usb: chipidea: add PTW and PTS handling

Sascha Hauer (2):
      USB chipidea: introduce dual role mode pdata flags
      USB chipidea i.MX: introduce dr_mode property

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 ++
 drivers/usb/chipidea/bits.h                        |    7 ++
 drivers/usb/chipidea/ci13xxx_imx.c                 |   29 +++++---
 drivers/usb/chipidea/core.c                        |   61 +++++++++++++++--
 drivers/usb/usb-common.c                           |   69 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++++++++
 include/linux/usb/otg.h                            |    7 ++
 include/linux/usb/phy.h                            |    9 +++
 9 files changed, 201 insertions(+), 17 deletions(-)
 create mode 100644 include/linux/usb/of.h

[PATCH 3/6] usb: chipidea: ci13xxx-imx: create dynamic platformdata

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch removes the limitation of having only one instance of the
ci13xxx-imx platformdata and makes different configurations possible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8c29122..69024e0 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
-	.name			= "ci13xxx_imx",
-	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
-				  CI13XXX_DISABLE_STREAMING,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
 static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
+	struct ci13xxx_platform_data *pdata;
 	struct platform_device *plat_ci, *phy_pdev;
 	struct device_node *phy_np;
 	struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		&& !usbmisc_ops)
 		return -EPROBE_DEFER;
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
+		return -ENOMEM;
+	}
+
+	pdata->name = "ci13xxx_imx";
+	pdata->capoffset = DEF_CAPOFFSET;
+	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
+		       CI13XXX_PULLUP_ON_VBUS |
+		       CI13XXX_DISABLE_STREAMING;
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		reg_vbus = NULL;
 	}
 
-	ci13xxx_imx_platdata.phy = data->phy;
+	pdata->phy = data->phy;
 
 	if (!pdev->dev.dma_mask) {
 		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,
-				&ci13xxx_imx_platdata);
+				pdata);
 	if (IS_ERR(plat_ci)) {
 		ret = PTR_ERR(plat_ci);
 		dev_err(&pdev->dev,
-- 
1.7.10.4