public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: wenyou.yang@atmel.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] watchdog/at91sam9_wdt: Convert to use the new framework
Date: Fri,  1 Feb 2013 15:06:18 +0800	[thread overview]
Message-ID: <1359702386-21284-1-git-send-email-wenyou.yang@atmel.com> (raw)

Hi, All

The purpose of the patch series is to convert at91sam9_wdt to use the watchdog framework,
 
Because the Watchdog Mode Register(WDT_MR) which WDDIS bit to disable or disable the watchdog
can be written only once after reset. so if you want to use the watchdog in the kernel, 
you must be sure the watchdog doesn't be disabled in the at91bootstrap.

It is tested on at91sam9m10g45ek both DT and non-DT support, at91sam9g25ek with DT support
by building Documentation/watchdog/src/watchdog-simple.c.

It is based on v3.8-rc6 + Arnd Bergmann's at91_wdt_dt_ids cannot be __init
			+ Fabio Porcedda's add timeout-sec property binding

ChangeLog 
v4:
  - remove the patch: Use module_platform_driver().
  - add tested on at91sam9m10g45ek both DT and non-DT support.
  - rebase on v3.8-rc6 

v3:
  - The helper function 'watchdog_is_open' is moved to include/linux/watchdog.h
  - Remove '__init' annotation from the function 'at91wdt_probe'
  - Rebase on v3.8-rc2

v2:
  - Remove the patches to add devive tree support which Fabio Porcedda has applied.
  - Replace __raw_readl, __raw_writel with readl_relaxed, writel_relaxed.
  - Rebase on v3.7-rc8.

Best Regards
Wenyou Yang

Wenyou Yang (8):
  watchdog: add the function watchdog_is_open
  watchdog/at91sam9_wdt: Remove at91wdt_private and add at91wdt_drvdata
    struct
  watchdog/at91sam9_wdt: Convert to use the watchdog framework
  watchdog/at91sam9_wdt: Adjust the options of watchdog_info
  watchdog/at91sam9_wdt: Add nowayout helpers to Watchdog Timer Driver
    Kernel API
  watchdog/at91sam9_wdt: Remove the __initdata of at91wdt_wdd
  ARM: dts: add the watchdog nodes for at91sam9x5 and at91sam9n12 SoC
  ARM: dts: add the watchdog nodes for at91sam9g25ek and
    at91sam9m10g45ek boards

 arch/arm/boot/dts/at91sam9m10g45ek.dts |    4 +
 arch/arm/boot/dts/at91sam9n12.dtsi     |    6 +
 arch/arm/boot/dts/at91sam9x5.dtsi      |    6 +
 arch/arm/boot/dts/at91sam9x5ek.dtsi    |    4 +
 drivers/watchdog/at91sam9_wdt.c        |  272 +++++++++++++-------------------
 include/linux/watchdog.h               |    8 +
 6 files changed, 140 insertions(+), 160 deletions(-)

-- 
1.7.9.5

             reply	other threads:[~2013-02-01  7:06 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-01  7:06 Wenyou Yang [this message]
2013-02-01  7:06 ` [PATCH v4 1/8] watchdog: add the function watchdog_is_open Wenyou Yang
2013-02-01  7:06 ` [PATCH v4 2/8] watchdog/at91sam9_wdt: Remove at91wdt_private and add at91wdt_drvdata struct Wenyou Yang
     [not found]   ` <20130213224829.GD7867@spo001.leaseweb.com>
2013-02-18  5:33     ` Yang, Wenyou
2013-02-01  7:06 ` [PATCH v4 3/8] watchdog/at91sam9_wdt: Convert to use the watchdog framework Wenyou Yang
     [not found]   ` <20130213231007.GE7867@spo001.leaseweb.com>
2013-02-18  5:27     ` Yang, Wenyou
2013-02-01  7:06 ` [PATCH v4 4/8] watchdog/at91sam9_wdt: Adjust the options of watchdog_info Wenyou Yang
     [not found]   ` <20130213231522.GH7867@spo001.leaseweb.com>
2013-02-14  8:12     ` Alexander Stein
2013-02-01  7:06 ` [PATCH v4 5/8] watchdog/at91sam9_wdt: Add nowayout helpers to Watchdog Timer Driver Kernel API Wenyou Yang
2013-02-01  7:06 ` [PATCH v4 6/8] watchdog/at91sam9_wdt: Remove the __initdata of at91wdt_wdd Wenyou Yang
2013-02-01  7:06 ` [PATCH v4 7/8] ARM: dts: add the watchdog nodes for at91sam9x5 and at91sam9n12 SoC Wenyou Yang
2013-02-01  7:06 ` [PATCH v4 8/8] ARM: dts: add the watchdog nodes for at91sam9g25ek and at91sam9m10g45ek boards Wenyou Yang
2013-02-07 11:35 ` [PATCH v4 0/8] watchdog/at91sam9_wdt: Convert to use the new framework Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1359702386-21284-1-git-send-email-wenyou.yang@atmel.com \
    --to=wenyou.yang@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox