[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

Here's another round of the dr_mode/phy_type patches. I think they should
be ready for merging now. Greg, will you apply them should there be no
problems anymore?

Sascha

changes since v2:

- fix adding of GPL Header was in wrong patch
- add missing hunk for new file of.c

changes since v1:
- move phy specific of helper to drivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- change usb_phy_dr_mode to usb_dr_mode
- change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTW


The following changes since commit 7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:

  USB: chipidea: ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-for-next

for you to fetch changes up to b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:

  USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-01-31 12:27:36 +0100)

----------------------------------------------------------------
USB Chipidea patches for v3.9

These add OF helpers for handling the dr_mode and phy_type property
and makes use of them in the chipidea driver.

----------------------------------------------------------------
Michael Grzeschik (3):
      USB: add devicetree helpers for determining dr_mode and phy_type
      USB: chipidea: ci13xxx-imx: create dynamic platformdata
      USB: chipidea: add PTW and PTS handling

Sascha Hauer (6):
      USB: move bulk of otg/otg.c to phy/phy.c
      USB chipidea: introduce dual role mode pdata flags
      USB chipidea i.MX: introduce dr_mode property
      como fec wip
      USB mxs-phy: Register phy with framework
      USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

 Documentation/devicetree/bindings/net/fsl-fec.txt  |   20 +
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
 drivers/net/ethernet/freescale/fec.c               |   77 ++--
 drivers/net/ethernet/freescale/fec.h               |    1 +
 drivers/usb/chipidea/bits.h                        |   14 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |   60 ++-
 drivers/usb/chipidea/core.c                        |   60 ++-
 drivers/usb/otg/mxs-phy.c                          |    9 +
 drivers/usb/otg/otg.c                              |  423 -------------------
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/of.c                               |   47 +++
 drivers/usb/phy/phy.c                              |  434 ++++++++++++++++++++
 drivers/usb/usb-common.c                           |   36 ++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++
 include/linux/usb/otg.h                            |    7 +
 include/linux/usb/phy.h                            |    9 +
 17 files changed, 742 insertions(+), 493 deletions(-)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 drivers/usb/phy/phy.c
 create mode 100644 include/linux/usb/of.h

[PATCH 1/9] USB: move bulk of otg/otg.c to phy/phy.c

[Sascha Hauer]

Most of otg/otg.c is not otg specific, but phy specific, so move it
to the phy directory.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/otg/otg.c    |  423 --------------------------------------------
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/phy.c    |  434 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 435 insertions(+), 423 deletions(-)
 create mode 100644 drivers/usb/phy/phy.c

diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index e181439..358cfd9 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -8,432 +8,9 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
-#include <linux/kernel.h>
 #include <linux/export.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-
 #include <linux/usb/otg.h>
 
-static LIST_HEAD(phy_list);
-static LIST_HEAD(phy_bind_list);
-static DEFINE_SPINLOCK(phy_lock);
-
-static struct usb_phy *__usb_find_phy(struct list_head *list,
-	enum usb_phy_type type)
-{
-	struct usb_phy  *phy = NULL;
-
-	list_for_each_entry(phy, list, head) {
-		if (phy->type != type)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__usb_find_phy_dev(struct device *dev,
-	struct list_head *list, u8 index)
-{
-	struct usb_phy_bind *phy_bind = NULL;
-
-	list_for_each_entry(phy_bind, list, list) {
-		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
-				phy_bind->index == index) {
-			if (phy_bind->phy)
-				return phy_bind->phy;
-			else
-				return ERR_PTR(-EPROBE_DEFER);
-		}
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__of_usb_find_phy(struct device_node *node)
-{
-	struct usb_phy  *phy;
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (node != phy->dev->of_node)
-			continue;
-
-		return phy;
-	}
-
-	return ERR_PTR(-ENODEV);
-}
-
-static void devm_usb_phy_release(struct device *dev, void *res)
-{
-	struct usb_phy *phy = *(struct usb_phy **)res;
-
-	usb_put_phy(phy);
-}
-
-static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
-{
-	return res == match_data;
-}
-
-/**
- * devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
- *
- * Gets the phy using usb_get_phy(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy(type);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy);
-
-/**
- * usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver of type %s\n",
-			usb_phy_type_string(type));
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy);
-
- /**
- * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
- *
- * Returns the phy driver associated with the given phandle value,
- * after getting a refcount to it, -ENODEV if there is no such phy or
- * -EPROBE_DEFER if there is a phandle to the phy, but the device is
- * not yet loaded. While at that, it also associates the device with
- * the phy using devres. On driver detach, release function is invoked
- * on the devres data, then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
-	const char *phandle, u8 index)
-{
-	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
-	unsigned long	flags;
-	struct device_node *node;
-
-	if (!dev->of_node) {
-		dev_dbg(dev, "device does not have a device node entry\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	node = of_parse_phandle(dev->of_node, phandle, index);
-	if (!node) {
-		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
-			dev->of_node->full_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr) {
-		dev_dbg(dev, "failed to allocate memory for devres\n");
-		goto err0;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __of_usb_find_phy(node);
-	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
-		phy = ERR_PTR(-EPROBE_DEFER);
-		devres_free(ptr);
-		goto err1;
-	}
-
-	*ptr = phy;
-	devres_add(dev, ptr);
-
-	get_device(phy->dev);
-
-err1:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-err0:
-	of_node_put(node);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
-
-/**
- * usb_get_phy_dev - find the USB PHY
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy.  The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy	*phy = NULL;
-	unsigned long	flags;
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
-		pr_err("unable to find transceiver\n");
-		goto err0;
-	}
-
-	get_device(phy->dev);
-
-err0:
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return phy;
-}
-EXPORT_SYMBOL(usb_get_phy_dev);
-
-/**
- * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Gets the phy using usb_get_phy_dev(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
-{
-	struct usb_phy **ptr, *phy;
-
-	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return NULL;
-
-	phy = usb_get_phy_dev(dev, index);
-	if (!IS_ERR(phy)) {
-		*ptr = phy;
-		devres_add(dev, ptr);
-	} else
-		devres_free(ptr);
-
-	return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
-
-/**
- * devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
- *
- * destroys the devres associated with this phy and invokes usb_put_phy
- * to release the phy.
- *
- * For use by USB host and peripheral drivers.
- */
-void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
-{
-	int r;
-
-	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
-	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
-}
-EXPORT_SYMBOL(devm_usb_put_phy);
-
-/**
- * usb_put_phy - release the USB PHY
- * @x: the phy returned by usb_get_phy()
- *
- * Releases a refcount the caller received from usb_get_phy().
- *
- * For use by USB host and peripheral drivers.
- */
-void usb_put_phy(struct usb_phy *x)
-{
-	if (x)
-		put_device(x->dev);
-}
-EXPORT_SYMBOL(usb_put_phy);
-
-/**
- * usb_add_phy - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
-{
-	int		ret = 0;
-	unsigned long	flags;
-	struct usb_phy	*phy;
-
-	if (x->type != USB_PHY_TYPE_UNDEFINED) {
-		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-
-	list_for_each_entry(phy, &phy_list, head) {
-		if (phy->type == type) {
-			ret = -EBUSY;
-			dev_err(x->dev, "transceiver type %s already exists\n",
-						usb_phy_type_string(type));
-			goto out;
-		}
-	}
-
-	x->type = type;
-	list_add_tail(&x->head, &phy_list);
-
-out:
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(usb_add_phy);
-
-/**
- * usb_add_phy_dev - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy_dev(struct usb_phy *x)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	if (!x->dev) {
-		dev_err(x->dev, "no device provided for PHY\n");
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_for_each_entry(phy_bind, &phy_bind_list, list)
-		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
-			phy_bind->phy = x;
-
-	list_add_tail(&x->head, &phy_list);
-
-	spin_unlock_irqrestore(&phy_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(usb_add_phy_dev);
-
-/**
- * usb_remove_phy - remove the OTG PHY
- * @x: the USB OTG PHY to be removed;
- *
- * This reverts the effects of usb_add_phy
- */
-void usb_remove_phy(struct usb_phy *x)
-{
-	unsigned long	flags;
-	struct usb_phy_bind *phy_bind;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	if (x) {
-		list_for_each_entry(phy_bind, &phy_bind_list, list)
-			if (phy_bind->phy == x)
-				phy_bind->phy = NULL;
-		list_del(&x->head);
-	}
-	spin_unlock_irqrestore(&phy_lock, flags);
-}
-EXPORT_SYMBOL(usb_remove_phy);
-
-/**
- * usb_bind_phy - bind the phy and the controller that uses the phy
- * @dev_name: the device name of the device that will bind to the phy
- * @index: index to specify the port number
- * @phy_dev_name: the device name of the phy
- *
- * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
- * be used when the phy driver registers the phy and when the controller
- * requests this phy.
- *
- * To be used by platform specific initialization code.
- */
-int __init usb_bind_phy(const char *dev_name, u8 index,
-				const char *phy_dev_name)
-{
-	struct usb_phy_bind *phy_bind;
-	unsigned long flags;
-
-	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
-	if (!phy_bind) {
-		pr_err("phy_bind(): No memory for phy_bind");
-		return -ENOMEM;
-	}
-
-	phy_bind->dev_name = dev_name;
-	phy_bind->phy_dev_name = phy_dev_name;
-	phy_bind->index = index;
-
-	spin_lock_irqsave(&phy_lock, flags);
-	list_add_tail(&phy_bind->list, &phy_bind_list);
-	spin_unlock_irqrestore(&phy_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_bind_phy);
-
 const char *otg_state_string(enum usb_otg_state state)
 {
 	switch (state) {
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..9fa6327 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,6 +4,7 @@
 
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
new file mode 100644
index 0000000..2c9e4e7
--- /dev/null
+++ b/drivers/usb/phy/phy.c
@@ -0,0 +1,434 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004-2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+static LIST_HEAD(phy_list);
+static LIST_HEAD(phy_bind_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+	enum usb_phy_type type)
+{
+	struct usb_phy  *phy = NULL;
+
+	list_for_each_entry(phy, list, head) {
+		if (phy->type != type)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__usb_find_phy_dev(struct device *dev,
+	struct list_head *list, u8 index)
+{
+	struct usb_phy_bind *phy_bind = NULL;
+
+	list_for_each_entry(phy_bind, list, list) {
+		if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
+				phy_bind->index == index) {
+			if (phy_bind->phy)
+				return phy_bind->phy;
+			else
+				return ERR_PTR(-EPROBE_DEFER);
+		}
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+	struct usb_phy  *phy;
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (node != phy->dev->of_node)
+			continue;
+
+		return phy;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+	struct usb_phy *phy = *(struct usb_phy **)res;
+
+	usb_put_phy(phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+	return res == match_data;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev - device that requests this phy
+ * @type - the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy(type);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type - the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy(&phy_list, type);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver of type %s\n",
+			usb_phy_type_string(type));
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy);
+
+ /**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev - device that requests this phy
+ * @phandle - name of the property holding the phy phandle value
+ * @index - the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+	const char *phandle, u8 index)
+{
+	struct usb_phy	*phy = ERR_PTR(-ENOMEM), **ptr;
+	unsigned long	flags;
+	struct device_node *node;
+
+	if (!dev->of_node) {
+		dev_dbg(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, phandle, index);
+	if (!node) {
+		dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr) {
+		dev_dbg(dev, "failed to allocate memory for devres\n");
+		goto err0;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __of_usb_find_phy(node);
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+		phy = ERR_PTR(-EPROBE_DEFER);
+		devres_free(ptr);
+		goto err1;
+	}
+
+	*ptr = phy;
+	devres_add(dev, ptr);
+
+	get_device(phy->dev);
+
+err1:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+	of_node_put(node);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
+
+/**
+ * usb_get_phy_dev - find the USB PHY
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy.  The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy	*phy = NULL;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+	if (IS_ERR(phy)) {
+		pr_err("unable to find transceiver\n");
+		goto err0;
+	}
+
+	get_device(phy->dev);
+
+err0:
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return phy;
+}
+EXPORT_SYMBOL(usb_get_phy_dev);
+
+/**
+ * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Gets the phy using usb_get_phy_dev(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+	struct usb_phy **ptr, *phy;
+
+	ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	phy = usb_get_phy_dev(dev, index);
+	if (!IS_ERR(phy)) {
+		*ptr = phy;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_dev);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev - device that wants to release this phy
+ * @phy - the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+	if (x)
+		put_device(x->dev);
+}
+EXPORT_SYMBOL(usb_put_phy);
+
+/**
+ * usb_add_phy - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type - the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+	int		ret = 0;
+	unsigned long	flags;
+	struct usb_phy	*phy;
+
+	if (x->type != USB_PHY_TYPE_UNDEFINED) {
+		dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+
+	list_for_each_entry(phy, &phy_list, head) {
+		if (phy->type == type) {
+			ret = -EBUSY;
+			dev_err(x->dev, "transceiver type %s already exists\n",
+						usb_phy_type_string(type));
+			goto out;
+		}
+	}
+
+	x->type = type;
+	list_add_tail(&x->head, &phy_list);
+
+out:
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(usb_add_phy);
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	if (!x->dev) {
+		dev_err(x->dev, "no device provided for PHY\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_for_each_entry(phy_bind, &phy_bind_list, list)
+		if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
+			phy_bind->phy = x;
+
+	list_add_tail(&x->head, &phy_list);
+
+	spin_unlock_irqrestore(&phy_lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+	unsigned long	flags;
+	struct usb_phy_bind *phy_bind;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	if (x) {
+		list_for_each_entry(phy_bind, &phy_bind_list, list)
+			if (phy_bind->phy == x)
+				phy_bind->phy = NULL;
+		list_del(&x->head);
+	}
+	spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL(usb_remove_phy);
+
+/**
+ * usb_bind_phy - bind the phy and the controller that uses the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @index: index to specify the port number
+ * @phy_dev_name: the device name of the phy
+ *
+ * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
+ * be used when the phy driver registers the phy and when the controller
+ * requests this phy.
+ *
+ * To be used by platform specific initialization code.
+ */
+int __init usb_bind_phy(const char *dev_name, u8 index,
+				const char *phy_dev_name)
+{
+	struct usb_phy_bind *phy_bind;
+	unsigned long flags;
+
+	phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
+	if (!phy_bind) {
+		pr_err("phy_bind(): No memory for phy_bind");
+		return -ENOMEM;
+	}
+
+	phy_bind->dev_name = dev_name;
+	phy_bind->phy_dev_name = phy_dev_name;
+	phy_bind->index = index;
+
+	spin_lock_irqsave(&phy_lock, flags);
+	list_add_tail(&phy_bind->list, &phy_bind_list);
+	spin_unlock_irqrestore(&phy_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_bind_phy);
-- 
1.7.10.4

[PATCH 2/9] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/phy/Makefile |    1 +
 drivers/usb/phy/of.c     |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/usb-common.c |   36 +++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   |   27 ++++++++++++++++++++++++++
 include/linux/usb/otg.h  |    7 +++++++
 include/linux/usb/phy.h  |    9 +++++++++
 6 files changed, 127 insertions(+)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_OTG_UTILS)		+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_OMAP_USB3)			+= omap-usb3.o
 obj-$(CONFIG_OMAP_CONTROL_USB)		+= omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_UNKNOWN]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
 
 const char *usb_speed_string(enum usb_device_speed speed)
 {
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.7.10.4

[PATCH 3/9] USB: chipidea: ci13xxx-imx: create dynamic platformdata

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch removes the limitation of having only one instance of the
ci13xxx-imx platformdata and makes different configurations possible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 8c29122..69024e0 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -85,17 +85,10 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
-	.name			= "ci13xxx_imx",
-	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
-				  CI13XXX_PULLUP_ON_VBUS |
-				  CI13XXX_DISABLE_STREAMING,
-	.capoffset		= DEF_CAPOFFSET,
-};
-
 static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
+	struct ci13xxx_platform_data *pdata;
 	struct platform_device *plat_ci, *phy_pdev;
 	struct device_node *phy_np;
 	struct resource *res;
@@ -107,6 +100,18 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		&& !usbmisc_ops)
 		return -EPROBE_DEFER;
 
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX pdata!\n");
+		return -ENOMEM;
+	}
+
+	pdata->name = "ci13xxx_imx";
+	pdata->capoffset = DEF_CAPOFFSET;
+	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
+		       CI13XXX_PULLUP_ON_VBUS |
+		       CI13XXX_DISABLE_STREAMING;
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
@@ -168,7 +173,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		reg_vbus = NULL;
 	}
 
-	ci13xxx_imx_platdata.phy = data->phy;
+	pdata->phy = data->phy;
 
 	if (!pdev->dev.dma_mask) {
 		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
@@ -193,7 +198,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 
 	plat_ci = ci13xxx_add_device(&pdev->dev,
 				pdev->resource, pdev->num_resources,
-				&ci13xxx_imx_platdata);
+				pdata);
 	if (IS_ERR(plat_ci)) {
 		ret = PTR_ERR(plat_ci);
 		dev_err(&pdev->dev,
-- 
1.7.10.4

[PATCH 4/9] USB: chipidea: add PTW and PTS handling

[Sascha Hauer]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

This patch makes it possible to configure the PTW and PTS bits inside
the portsc register for host and device mode before the driver starts
and the phy can be addressed as hardware implementation is designed.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    5 +++
 drivers/usb/chipidea/bits.h                        |   14 ++++++-
 drivers/usb/chipidea/ci13xxx_imx.c                 |    3 ++
 drivers/usb/chipidea/core.c                        |   39 ++++++++++++++++++++
 include/linux/usb/chipidea.h                       |    1 +
 5 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 5778b9c..dd42ccd 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -5,6 +5,11 @@ Required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain controller interrupt
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched
+
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
 - fsl,usbmisc: phandler of non-core register device, with one argument
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 050de85..d8ffc2f 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -48,10 +48,22 @@
 #define PORTSC_SUSP           BIT(7)
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PTC            (0x0FUL << 16)
+/* PTS and PTW for non lpm version only */
+#define PORTSC_PTS(d)         ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
+#define PORTSC_PTW            BIT(28)
 
 /* DEVLC */
 #define DEVLC_PSPD            (0x03UL << 25)
-#define    DEVLC_PSPD_HS      (0x02UL << 25)
+#define DEVLC_PSPD_HS         (0x02UL << 25)
+#define DEVLC_PTW             BIT(27)
+#define DEVLC_STS             BIT(28)
+#define DEVLC_PTS(d)          (((d) & 0x7) << 29)
+
+/* Encoding for DEVLC_PTS and PORTSC_PTS */
+#define PTS_UTMI              0
+#define PTS_ULPI              2
+#define PTS_SERIAL            3
+#define PTS_HSIC              4
 
 /* OTGSC */
 #define OTGSC_IDPU	      BIT(5)
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 69024e0..ebc1148 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/usb/of.h>
 
 #include "ci.h"
 #include "ci13xxx_imx.h"
@@ -112,6 +113,8 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_PULLUP_ON_VBUS |
 		       CI13XXX_DISABLE_STREAMING;
 
+	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 57cae1f..a3ec29d 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -67,6 +67,8 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
+#include <linux/phy.h>
 
 #include "ci.h"
 #include "udc.h"
@@ -211,6 +213,41 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	return 0;
 }
 
+static void hw_phymode_configure(struct ci13xxx *ci)
+{
+	u32 portsc, lpm;
+
+	switch (ci->platdata->phy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		portsc = PORTSC_PTS(PTS_UTMI);
+		lpm = DEVLC_PTS(PTS_UTMI);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
+		lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
+		break;
+	case USBPHY_INTERFACE_MODE_ULPI:
+		portsc = PORTSC_PTS(PTS_ULPI);
+		lpm = DEVLC_PTS(PTS_ULPI);
+		break;
+	case USBPHY_INTERFACE_MODE_SERIAL:
+		portsc = PORTSC_PTS(PTS_SERIAL);
+		lpm = DEVLC_PTS(PTS_SERIAL);
+		break;
+	case USBPHY_INTERFACE_MODE_HSIC:
+		portsc = PORTSC_PTS(PTS_HSIC);
+		lpm = DEVLC_PTS(PTS_HSIC);
+		break;
+	default:
+		return;
+	}
+
+	if (ci->hw_bank.lpm)
+		hw_write(ci, OP_PORTSC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
+	else
+		hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
+}
+
 /**
  * hw_device_reset: resets chip (execute without interruption)
  * @ci: the controller
@@ -476,6 +513,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
+	hw_phymode_configure(ci);
+
 	ret = ci_role_start(ci, ci->role);
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..1a2aa18 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -14,6 +14,7 @@ struct ci13xxx_platform_data {
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
 	struct usb_phy	*phy;
+	enum usb_phy_interface phy_mode;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.10.4

[PATCH 5/9] USB chipidea: introduce dual role mode pdata flags

[Sascha Hauer]

Even if a chipidea core is otg capable the board may not. This allows
to explicitly set the core to host/peripheral mode. Without these
flags the driver falls back to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/core.c  |   21 +++++++++++++++------
 include/linux/usb/chipidea.h |    2 +-
 2 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a3ec29d..b2dbf55 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	struct resource	*res;
 	void __iomem	*base;
 	int		ret;
+	int		dr_mode;
 
 	if (!dev->platform_data) {
 		dev_err(dev, "platform data missing\n");
@@ -487,14 +488,22 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	dr_mode = ci->platdata->dr_mode;
+	if (dr_mode == USB_DR_MODE_UNKNOWN)
+		dr_mode = USB_DR_MODE_OTG;
+
 	/* initialize role(s) before the interrupt is requested */
-	ret = ci_hdrc_host_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support host\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+		ret = ci_hdrc_host_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support host\n");
+	}
 
-	ret = ci_hdrc_gadget_init(ci);
-	if (ret)
-		dev_info(dev, "doesn't support gadget\n");
+	if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+		ret = ci_hdrc_gadget_init(ci);
+		if (ret)
+			dev_info(dev, "doesn't support gadget\n");
+	}
 
 	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 		dev_err(dev, "no supported roles\n");
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 1a2aa18..b314647 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS		BIT(2)
 #define CI13XXX_DISABLE_STREAMING	BIT(3)
-
+	enum usb_dr_mode	dr_mode;
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
 	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
-- 
1.7.10.4

[PATCH 6/9] USB chipidea i.MX: introduce dr_mode property

[Sascha Hauer]

The dr_mode devicetree property allows to explicitly specify the
host/peripheral/otg mode. This is necessary for boards without proper
ID pin handling.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
---
 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt |    1 +
 drivers/usb/chipidea/ci13xxx_imx.c                    |    1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index dd42ccd..493a414 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -9,6 +9,7 @@ Recommended properies:
 - phy_type: the type of the phy connected to the core. Should be one
   of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
   property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
 
 Optional properties:
 - fsl,usbphy: phandler of usb phy that connects to the only one port
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index ebc1148..b598bb8f 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -114,6 +114,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		       CI13XXX_DISABLE_STREAMING;
 
 	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
+	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data) {
-- 
1.7.10.4

[PATCH 7/9] como fec wip

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 Documentation/devicetree/bindings/net/fsl-fec.txt |   20 ++++++
 drivers/net/ethernet/freescale/fec.c              |   77 ++++++++++++---------
 drivers/net/ethernet/freescale/fec.h              |    1 +
 3 files changed, 67 insertions(+), 31 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index d536392..ec7060b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,9 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy : a phandle for the PHY device used for the fec. Used to specify an
+  external phy or to specify a particular address if the mdio bus has multiple
+  phys on it.
 
 Example:
 
@@ -26,3 +29,20 @@ ethernet at 83fec000 {
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
 };
+
+Example with specific phy address:
+
+ethernet at 83fec000 {
+	compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+	reg = <0x83fec000 0x4000>;
+	interrupts = <87>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
+	local-mac-address = [00 04 9F 01 1B B9];
+	phy = &phy3;
+
+	phy3: ethernet-phy at 3 {
+		reg = <3>;
+		device_type = "ethernet-phy";
+	};
+};
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 0704bca..54a8506 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -48,6 +48,7 @@
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/of_net.h>
+#include <linux/of_mdio.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/regulator/consumer.h>
 
@@ -950,31 +951,38 @@ static int fec_enet_mii_probe(struct net_device *ndev)
 
 	fep->phy_dev = NULL;
 
-	/* check for attached phy */
-	for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
-		if ((fep->mii_bus->phy_mask & (1 << phy_id)))
-			continue;
-		if (fep->mii_bus->phy_map[phy_id] == NULL)
-			continue;
-		if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
-			continue;
-		if (dev_id--)
-			continue;
-		strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
-		break;
-	}
+	if (fep->phy_node) {
+		phy_dev = of_phy_connect(ndev, fep->phy_node, &fec_enet_adjust_link, 0,
+			      fep->phy_interface);
+	} else {
+		/* check for attached phy */
+		for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+			if ((fep->mii_bus->phy_mask & (1 << phy_id)))
+				continue;
+			if (fep->mii_bus->phy_map[phy_id] == NULL)
+				continue;
+			if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
+				continue;
+			if (dev_id--)
+				continue;
+			strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
+			break;
+		}
 
-	if (phy_id >= PHY_MAX_ADDR) {
-		printk(KERN_INFO
-			"%s: no PHY, assuming direct connection to switch\n",
-			ndev->name);
-		strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
-		phy_id = 0;
+		if (phy_id >= PHY_MAX_ADDR) {
+			printk(KERN_INFO
+				"%s: no PHY, assuming direct connection to switch\n",
+				ndev->name);
+			strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
+			phy_id = 0;
+		}
+
+		snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id);
+
+		phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0,
+				      fep->phy_interface);
 	}
 
-	snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id);
-	phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, 0,
-			      fep->phy_interface);
 	if (IS_ERR(phy_dev)) {
 		printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name);
 		return PTR_ERR(phy_dev);
@@ -1076,7 +1084,12 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	for (i = 0; i < PHY_MAX_ADDR; i++)
 		fep->mii_bus->irq[i] = PHY_POLL;
 
-	if (mdiobus_register(fep->mii_bus))
+	if (fep->phy_node)
+		err = of_mdiobus_register(fep->mii_bus, pdev->dev.of_node);
+	else
+		err = mdiobus_register(fep->mii_bus);
+
+	if (err)
 		goto err_out_free_mdio_irq;
 
 	mii_cnt++;
@@ -1484,12 +1497,16 @@ static int fec_enet_init(struct net_device *ndev)
 }
 
 #ifdef CONFIG_OF
-static int fec_get_phy_mode_dt(struct platform_device *pdev)
+static int fec_probe_dt(struct fec_enet_private *fep)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = fep->pdev->dev.of_node;
+
+	if (!np)
+		return -ENODEV;
 
-	if (np)
-		return of_get_phy_mode(np);
+	fep->phy_interface = of_get_phy_mode(np);
+
+	fep->phy_node = of_parse_phandle(np, "phy", 0);
 
 	return -ENODEV;
 }
@@ -1519,7 +1536,7 @@ static void fec_reset_phy(struct platform_device *pdev)
 	gpio_set_value(phy_reset, 1);
 }
 #else /* CONFIG_OF */
-static inline int fec_get_phy_mode_dt(struct platform_device *pdev)
+static inline int fec_probe_dt(struct fec_enet_private *fep)
 {
 	return -ENODEV;
 }
@@ -1581,15 +1598,13 @@ fec_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ndev);
 
-	ret = fec_get_phy_mode_dt(pdev);
+	ret = fec_probe_dt(fep);
 	if (ret < 0) {
 		pdata = pdev->dev.platform_data;
 		if (pdata)
 			fep->phy_interface = pdata->phy;
 		else
 			fep->phy_interface = PHY_INTERFACE_MODE_MII;
-	} else {
-		fep->phy_interface = ret;
 	}
 
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index c5a3bc1..0120ea6 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -236,6 +236,7 @@ struct fec_enet_private {
 	/* Phylib and MDIO interface */
 	struct	mii_bus *mii_bus;
 	struct	phy_device *phy_dev;
+	struct	device_node *phy_node;
 	int	mii_timeout;
 	uint	phy_speed;
 	phy_interface_t	phy_interface;
-- 
1.7.10.4

[PATCH 8/9] USB mxs-phy: Register phy with framework

[Sascha Hauer]

We now have usb_add_phy_dev(), so use it to register with the framework
to be able to find the phy from the USB driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/otg/mxs-phy.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
index 5158332..5b39885 100644
--- a/drivers/usb/otg/mxs-phy.c
+++ b/drivers/usb/otg/mxs-phy.c
@@ -127,6 +127,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct clk *clk;
 	struct mxs_phy *mxs_phy;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -166,11 +167,19 @@ static int mxs_phy_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &mxs_phy->phy);
 
+	ret = usb_add_phy_dev(&mxs_phy->phy);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
 static int mxs_phy_remove(struct platform_device *pdev)
 {
+	struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&mxs_phy->phy);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
-- 
1.7.10.4

[PATCH 9/9] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/usb/chipidea/ci13xxx_imx.c |   31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index b598bb8f..1df4b41 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -30,7 +30,6 @@
 	((struct usb_phy *)platform_get_drvdata(pdev))
 
 struct ci13xxx_imx_data {
-	struct device_node *phy_np;
 	struct usb_phy *phy;
 	struct platform_device *ci_pdev;
 	struct clk *clk;
@@ -90,12 +89,12 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
 	struct ci13xxx_platform_data *pdata;
-	struct platform_device *plat_ci, *phy_pdev;
-	struct device_node *phy_np;
+	struct platform_device *plat_ci;
 	struct resource *res;
 	struct regulator *reg_vbus;
 	struct pinctrl *pinctrl;
 	int ret;
+	struct usb_phy *phy;
 
 	if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL)
 		&& !usbmisc_ops)
@@ -147,18 +146,12 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
-	if (phy_np) {
-		data->phy_np = phy_np;
-		phy_pdev = of_find_device_by_node(phy_np);
-		if (phy_pdev) {
-			struct usb_phy *phy;
-			phy = pdev_to_phy(phy_pdev);
-			if (phy &&
-			    try_module_get(phy_pdev->dev.driver->owner)) {
-				usb_phy_init(phy);
-				data->phy = phy;
-			}
+	phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
+	if (!IS_ERR(phy)) {
+		ret = usb_phy_init(phy);
+		if (ret) {
+			dev_err(&pdev->dev, "unable to init phy: %d\n", ret);
+			goto err_clk;
 		}
 	}
 
@@ -170,7 +163,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"Failed to enable vbus regulator, err=%d\n",
 				ret);
-			goto put_np;
+			goto err_clk;
 		}
 		data->reg_vbus = reg_vbus;
 	} else {
@@ -222,9 +215,7 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
 err:
 	if (reg_vbus)
 		regulator_disable(reg_vbus);
-put_np:
-	if (phy_np)
-		of_node_put(phy_np);
+err_clk:
 	clk_disable_unprepare(data->clk);
 	return ret;
 }
@@ -244,8 +235,6 @@ static int ci13xxx_imx_remove(struct platform_device *pdev)
 		module_put(data->phy->dev->driver->owner);
 	}
 
-	of_node_put(data->phy_np);
-
 	clk_disable_unprepare(data->clk);
 
 	platform_set_drvdata(pdev, NULL);
-- 
1.7.10.4

[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

(resend because I got the linux-usb address wrong)

Here's another round of the dr_mode/phy_type patches. I think they should
be ready for merging now. Greg, will you apply them should there be no
problems anymore?

Sascha

changes since v2:

- fix adding of GPL Header was in wrong patch
- add missing hunk for new file of.c

changes since v1:
- move phy specific of helper to drivers/usb/phy/of.c
- use strcmp instead of strcasecmp for matching property values
- change usb_phy_dr_mode to usb_dr_mode
- change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
- add copyright header to new files
- chipidea: drop mdelay at end of PTS/PTW setup
- chipidea: implement lpm core type handling for PTS/PTW

The following changes since commit 7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:

  USB: chipidea: ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)

are available in the git repository at:

  git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-for-next

for you to fetch changes up to b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:

  USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-01-31 12:27:36 +0100)

----------------------------------------------------------------
USB Chipidea patches for v3.9

These add OF helpers for handling the dr_mode and phy_type property
and makes use of them in the chipidea driver.

----------------------------------------------------------------
Michael Grzeschik (3):
      USB: add devicetree helpers for determining dr_mode and phy_type
      USB: chipidea: ci13xxx-imx: create dynamic platformdata
      USB: chipidea: add PTW and PTS handling

Sascha Hauer (6):
      USB: move bulk of otg/otg.c to phy/phy.c
      USB chipidea: introduce dual role mode pdata flags
      USB chipidea i.MX: introduce dr_mode property
      como fec wip
      USB mxs-phy: Register phy with framework
      USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy

 Documentation/devicetree/bindings/net/fsl-fec.txt  |   20 +
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
 drivers/net/ethernet/freescale/fec.c               |   77 ++--
 drivers/net/ethernet/freescale/fec.h               |    1 +
 drivers/usb/chipidea/bits.h                        |   14 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |   60 ++-
 drivers/usb/chipidea/core.c                        |   60 ++-
 drivers/usb/otg/mxs-phy.c                          |    9 +
 drivers/usb/otg/otg.c                              |  423 -------------------
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/of.c                               |   47 +++
 drivers/usb/phy/phy.c                              |  434 ++++++++++++++++++++
 drivers/usb/usb-common.c                           |   36 ++
 include/linux/usb/chipidea.h                       |    3 +-
 include/linux/usb/of.h                             |   27 ++
 include/linux/usb/otg.h                            |    7 +
 include/linux/usb/phy.h                            |    9 +
 17 files changed, 742 insertions(+), 493 deletions(-)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 drivers/usb/phy/phy.c
 create mode 100644 include/linux/usb/of.h

[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

On Fri, Feb 01, 2013 at 08:48:21AM +0100, Sascha Hauer wrote:
> Here's another round of the dr_mode/phy_type patches. I think they should
> be ready for merging now. Greg, will you apply them should there be no
> problems anymore?

Please ignore, the linux-usb address is wrong, I just resent these.

Sascha

> 
> Sascha
> 
> changes since v2:
> 
> - fix adding of GPL Header was in wrong patch
> - add missing hunk for new file of.c
> 
> changes since v1:
> - move phy specific of helper to drivers/usb/phy/of.c
> - use strcmp instead of strcasecmp for matching property values
> - change usb_phy_dr_mode to usb_dr_mode
> - change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
> - add copyright header to new files
> - chipidea: drop mdelay at end of PTS/PTW setup
> - chipidea: implement lpm core type handling for PTS/PTW
> 
> 
> The following changes since commit 7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:
> 
>   USB: chipidea: ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)
> 
> are available in the git repository at:
> 
>   git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-for-next
> 
> for you to fetch changes up to b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:
> 
>   USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-01-31 12:27:36 +0100)
> 
> ----------------------------------------------------------------
> USB Chipidea patches for v3.9
> 
> These add OF helpers for handling the dr_mode and phy_type property
> and makes use of them in the chipidea driver.
> 
> ----------------------------------------------------------------
> Michael Grzeschik (3):
>       USB: add devicetree helpers for determining dr_mode and phy_type
>       USB: chipidea: ci13xxx-imx: create dynamic platformdata
>       USB: chipidea: add PTW and PTS handling
> 
> Sascha Hauer (6):
>       USB: move bulk of otg/otg.c to phy/phy.c
>       USB chipidea: introduce dual role mode pdata flags
>       USB chipidea i.MX: introduce dr_mode property
>       como fec wip
>       USB mxs-phy: Register phy with framework
>       USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
> 
>  Documentation/devicetree/bindings/net/fsl-fec.txt  |   20 +
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
>  drivers/net/ethernet/freescale/fec.c               |   77 ++--
>  drivers/net/ethernet/freescale/fec.h               |    1 +
>  drivers/usb/chipidea/bits.h                        |   14 +-
>  drivers/usb/chipidea/ci13xxx_imx.c                 |   60 ++-
>  drivers/usb/chipidea/core.c                        |   60 ++-
>  drivers/usb/otg/mxs-phy.c                          |    9 +
>  drivers/usb/otg/otg.c                              |  423 -------------------
>  drivers/usb/phy/Makefile                           |    2 +
>  drivers/usb/phy/of.c                               |   47 +++
>  drivers/usb/phy/phy.c                              |  434 ++++++++++++++++++++
>  drivers/usb/usb-common.c                           |   36 ++
>  include/linux/usb/chipidea.h                       |    3 +-
>  include/linux/usb/of.h                             |   27 ++
>  include/linux/usb/otg.h                            |    7 +
>  include/linux/usb/phy.h                            |    9 +
>  17 files changed, 742 insertions(+), 493 deletions(-)
>  create mode 100644 drivers/usb/phy/of.c
>  create mode 100644 drivers/usb/phy/phy.c
>  create mode 100644 include/linux/usb/of.h
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 5/9] USB chipidea: introduce dual role mode pdata flags

[Peter Chen]

On Fri, Feb 01, 2013 at 08:48:26AM +0100, Sascha Hauer wrote:
> Even if a chipidea core is otg capable the board may not. This allows
> to explicitly set the core to host/peripheral mode. Without these
> flags the driver falls back to the old behaviour.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  drivers/usb/chipidea/core.c  |   21 +++++++++++++++------
>  include/linux/usb/chipidea.h |    2 +-
>  2 files changed, 16 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index a3ec29d..b2dbf55 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -435,6 +435,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
>  	struct resource	*res;
>  	void __iomem	*base;
>  	int		ret;
> +	int		dr_mode;
why not using enum usb_dr_mode;
-- 

Best Regards,
Peter Chen

[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[Sascha Hauer]

Apparantly I was not fully awake while sending this series :(

On Fri, Feb 01, 2013 at 08:52:03AM +0100, Sascha Hauer wrote:
> (resend because I got the linux-usb address wrong)
> 
> Here's another round of the dr_mode/phy_type patches. I think they should
> be ready for merging now. Greg, will you apply them should there be no
> problems anymore?
> 
> Sascha
> 
> changes since v2:
> 
> - fix adding of GPL Header was in wrong patch
> - add missing hunk for new file of.c
> 
> changes since v1:
> - move phy specific of helper to drivers/usb/phy/of.c
> - use strcmp instead of strcasecmp for matching property values
> - change usb_phy_dr_mode to usb_dr_mode
> - change USBPHY_INTERFACE_MODE_NA to USBPHY_INTERFACE_MODE_UNKNOWN
> - add copyright header to new files
> - chipidea: drop mdelay at end of PTS/PTW setup
> - chipidea: implement lpm core type handling for PTS/PTW
> 
> The following changes since commit 7b8bc3aad0deabf3bc50cd2fe29bce29be5681fe:
> 
>   USB: chipidea: ci13xxx_imx: Remove sparse warning (2013-01-30 00:17:39 -0500)
> 
> are available in the git repository at:
> 
>   git://git.pengutronix.de/git/imx/linux-2.6.git tags/usb-chipidea-for-next
> 
> for you to fetch changes up to b82b92ba281add3e4d67bf6704052c0fd8c5c7f0:
> 
>   USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy (2013-01-31 12:27:36 +0100)
> 
> ----------------------------------------------------------------
> USB Chipidea patches for v3.9
> 
> These add OF helpers for handling the dr_mode and phy_type property
> and makes use of them in the chipidea driver.
> 
> ----------------------------------------------------------------
> Michael Grzeschik (3):
>       USB: add devicetree helpers for determining dr_mode and phy_type
>       USB: chipidea: ci13xxx-imx: create dynamic platformdata
>       USB: chipidea: add PTW and PTS handling
> 
> Sascha Hauer (6):
>       USB: move bulk of otg/otg.c to phy/phy.c
>       USB chipidea: introduce dual role mode pdata flags
>       USB chipidea i.MX: introduce dr_mode property
>       como fec wip
>       USB mxs-phy: Register phy with framework
>       USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy
> 
>  Documentation/devicetree/bindings/net/fsl-fec.txt  |   20 +
>  .../devicetree/bindings/usb/ci13xxx-imx.txt        |    6 +
>  drivers/net/ethernet/freescale/fec.c               |   77 ++--
>  drivers/net/ethernet/freescale/fec.h               |    1 +
>  drivers/usb/chipidea/bits.h                        |   14 +-
>  drivers/usb/chipidea/ci13xxx_imx.c                 |   60 ++-
>  drivers/usb/chipidea/core.c                        |   60 ++-
>  drivers/usb/otg/mxs-phy.c                          |    9 +
>  drivers/usb/otg/otg.c                              |  423 -------------------
>  drivers/usb/phy/Makefile                           |    2 +
>  drivers/usb/phy/of.c                               |   47 +++
>  drivers/usb/phy/phy.c                              |  434 ++++++++++++++++++++
>  drivers/usb/usb-common.c                           |   36 ++
>  include/linux/usb/chipidea.h                       |    3 +-
>  include/linux/usb/of.h                             |   27 ++
>  include/linux/usb/otg.h                            |    7 +
>  include/linux/usb/phy.h                            |    9 +
>  17 files changed, 742 insertions(+), 493 deletions(-)
>  create mode 100644 drivers/usb/phy/of.c
>  create mode 100644 drivers/usb/phy/phy.c
>  create mode 100644 include/linux/usb/of.h
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH v3] USB: add devicetree helpers for determining dr_mode and phy_type

[Greg KH]

On Fri, Feb 01, 2013 at 06:53:52PM +0100, Sascha Hauer wrote:
> Apparantly I was not fully awake while sending this series :(
> 
> On Fri, Feb 01, 2013 at 08:52:03AM +0100, Sascha Hauer wrote:
> > (resend because I got the linux-usb address wrong)
> > 
> > Here's another round of the dr_mode/phy_type patches. I think they should
> > be ready for merging now. Greg, will you apply them should there be no
> > problems anymore?

I need all chipidea patches to come from the maintainer of the driver, I
don't take git pull requests, sorry.

greg k-h