[PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283

[rui.zhang@intel.com (Zhang Rui)]

On Sat, 2013-02-02 at 15:35 +0100, Andrew Lunn wrote:
> From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> 
> Kirkwood 88F6282 and 88F6283 have a thermal sensor.
> This patch adds a DT node and enables the driver in the kernel config.
> 
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>

I can take this one but I need ACK from ARM experts first.

thanks,
rui
> ---
>  arch/arm/boot/dts/kirkwood-6282.dtsi |    6 ++++++
>  arch/arm/configs/kirkwood_defconfig  |    2 ++
>  2 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
> index 4ccea21..bd168b6 100644
> --- a/arch/arm/boot/dts/kirkwood-6282.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
> @@ -32,6 +32,12 @@
>  			};
>  		};
>  
> +		thermal at 10078 {
> +			compatible = "marvell,kirkwood-thermal";
> +			reg = <0x10078 0x4>;
> +			status = "okay";
> +		};
> +
>  		i2c at 11100 {
>  			compatible = "marvell,mv64xxx-i2c";
>  			reg = <0x11100 0x20>;
> diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
> index 93f3794..3d8667f 100644
> --- a/arch/arm/configs/kirkwood_defconfig
> +++ b/arch/arm/configs/kirkwood_defconfig
> @@ -118,6 +118,8 @@ CONFIG_SPI=y
>  CONFIG_SPI_ORION=y
>  CONFIG_GPIO_SYSFS=y
>  # CONFIG_HWMON is not set
> +CONFIG_THERMAL=y
> +CONFIG_KIRKWOOD_THERMAL=y
>  CONFIG_WATCHDOG=y
>  CONFIG_ORION_WATCHDOG=y
>  CONFIG_HID_DRAGONRISE=y