From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type
Date: Mon, 4 Feb 2013 14:24:29 +0100 [thread overview]
Message-ID: <1359984275-24646-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1359984275-24646-1-git-send-email-s.hauer@pengutronix.de>
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/of.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/usb-common.c | 36 +++++++++++++++++++++++++++++++++++
include/linux/usb/of.h | 27 ++++++++++++++++++++++++++
include/linux/usb/otg.h | 7 +++++++
include/linux/usb/phy.h | 9 +++++++++
6 files changed, 127 insertions(+)
create mode 100644 drivers/usb/phy/of.c
create mode 100644 include/linux/usb/of.h
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_OTG_UTILS) += phy.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..ad4d87d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
const char *usb_speed_string(enum usb_device_speed speed)
{
@@ -32,4 +35,37 @@ const char *usb_speed_string(enum usb_device_speed speed)
}
EXPORT_SYMBOL_GPL(usb_speed_string);
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+ [USB_DR_MODE_UNKNOWN] = "",
+ [USB_DR_MODE_HOST] = "host",
+ [USB_DR_MODE_PERIPHERAL] = "peripheral",
+ [USB_DR_MODE_OTG] = "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..4e8bfbb 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,11 @@ otg_start_srp(struct usb_otg *otg)
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+};
+
#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
#include <linux/notifier.h>
#include <linux/usb.h>
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
--
1.7.10.4
next prev parent reply other threads:[~2013-02-04 13:24 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 13:24 [PATCH v4] USB: add devicetree helpers for determining dr_mode and phy_type Sascha Hauer
2013-02-04 13:24 ` [PATCH 1/9] usb: otg: use try_module_get in all usb_get_phy functions and add missing module_put Sascha Hauer
2013-02-04 13:59 ` Roger Quadros
2013-02-04 14:10 ` Marc Kleine-Budde
2013-02-04 14:39 ` Roger Quadros
2013-02-04 13:24 ` [PATCH 2/9] USB: move bulk of otg/otg.c to phy/phy.c Sascha Hauer
2013-02-19 9:30 ` Felipe Balbi
2013-02-19 19:06 ` Sascha Hauer
2013-02-19 19:48 ` Felipe Balbi
2013-02-04 13:24 ` Sascha Hauer [this message]
2013-02-14 9:36 ` [PATCH 3/9] USB: add devicetree helpers for determining dr_mode and phy_type Alexander Shishkin
2013-02-14 9:49 ` Marc Kleine-Budde
2013-02-14 9:58 ` Felipe Balbi
2013-02-14 10:07 ` Sascha Hauer
2013-02-14 10:15 ` Felipe Balbi
2013-02-14 11:24 ` Sascha Hauer
2013-02-14 13:10 ` Felipe Balbi
2013-02-14 16:06 ` Sascha Hauer
2013-02-14 18:04 ` Felipe Balbi
2013-02-14 18:30 ` Sascha Hauer
2013-02-14 19:36 ` Felipe Balbi
2013-02-15 10:54 ` Sascha Hauer
2013-02-17 9:00 ` Peter Chen
2013-02-14 10:11 ` Marc Kleine-Budde
2013-02-14 10:16 ` Felipe Balbi
2013-03-13 9:43 ` Peter Chen
2013-02-04 13:24 ` [PATCH 4/9] USB: chipidea: ci13xxx-imx: create dynamic platformdata Sascha Hauer
2013-02-04 13:24 ` [PATCH 5/9] USB: chipidea: add PTW and PTS handling Sascha Hauer
2013-02-14 13:07 ` Alexander Shishkin
2013-02-27 10:23 ` Marc Kleine-Budde
2013-02-04 13:24 ` [PATCH 6/9] USB chipidea: introduce dual role mode pdata flags Sascha Hauer
2013-02-22 2:09 ` Peter Chen
2013-02-27 10:42 ` Marc Kleine-Budde
2013-02-04 13:24 ` [PATCH 7/9] USB chipidea i.MX: introduce dr_mode property Sascha Hauer
2013-02-04 13:24 ` [PATCH 8/9] USB mxs-phy: Register phy with framework Sascha Hauer
2013-02-04 13:24 ` [PATCH 9/9] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy Sascha Hauer
2013-02-05 11:45 ` Sergei Shtylyov
2013-02-05 11:58 ` Sascha Hauer
2013-02-05 5:54 ` [PATCH v4] USB: add devicetree helpers for determining dr_mode and phy_type Peter Chen
2013-02-07 10:56 ` Sascha Hauer
2013-02-12 13:59 ` Sascha Hauer
2013-02-14 13:22 ` Alexander Shishkin
-- strict thread matches above, loose matches on Subject: below --
2013-02-27 12:27 [PATCH v5 0/9] " Marc Kleine-Budde
2013-02-27 12:27 ` [PATCH 3/9] " Marc Kleine-Budde
2013-02-27 12:31 ` Marc Kleine-Budde
2013-02-27 12:32 ` Felipe Balbi
2013-02-27 12:32 ` Felipe Balbi
2013-02-27 12:38 ` Marc Kleine-Budde
2013-02-27 12:41 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359984275-24646-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).