From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 6 Feb 2013 18:58:47 +0530 Subject: [PATCH v2 1/5] ARM: OMAP4: remove control module address space from PHY and OTG In-Reply-To: <1360157331-9048-1-git-send-email-kishon@ti.com> References: <1360157331-9048-1-git-send-email-kishon@ti.com> Message-ID: <1360157331-9048-2-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that we have a separate driver for the control module, stop populating the control module device data in other modules (PHY and OTG) device info. Signed-off-by: Kishon Vijay Abraham I Acked-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 793f54a..624a7e8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = { .end = 0x4a0ae000, .flags = IORESOURCE_MEM, }, - { - /* XXX: Remove this once control module driver is in place */ - .name = "ctrl_dev", - .start = 0x4a002300, - .end = 0x4a002303, - .flags = IORESOURCE_MEM, - }, { } }; @@ -6156,12 +6149,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { .pa_end = 0x4a0ab7ff, .flags = ADDR_TYPE_RT }, - { - /* XXX: Remove this once control module driver is in place */ - .pa_start = 0x4a00233c, - .pa_end = 0x4a00233f, - .flags = ADDR_TYPE_RT - }, { } }; -- 1.7.10.4