[PATCH v2 0/5] ARM: OMAP: arm part of usb patches

[PATCH v2 0/5] ARM: OMAP: arm part of usb patches

[Kishon Vijay Abraham I]

Hi Greg,

Here is the patch series that includes the arch/arm part to get MUSB
working in OMAP platforms. As discussed in the other mail thread with
Tony, this patch series should go into usb-next.

This patch series also contains a patch by Felipe to fix compilation
warning in usb-next when CONFIG_OMAP_CONTROL_USB is not set.

Changes from v1:
Fixed alignment in omap4_control_usb as suggested by Sergei.

Boot tested panda board.

Felipe Balbi (1):
  usb: omap_control_usb: fix compile warning

Kishon Vijay Abraham I (4):
  ARM: OMAP4: remove control module address space from PHY and OTG
  ARM: OMAP: devices: create device for usb part of control module
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: USB: Add phy binding information

 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 arch/arm/mach-omap2/devices.c                |   45 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   13 --------
 arch/arm/mach-omap2/usb-musb.c               |    3 ++
 include/linux/usb/musb.h                     |    2 ++
 include/linux/usb/omap_control_usb.h         |    2 +-
 22 files changed, 85 insertions(+), 14 deletions(-)

-- 
1.7.10.4

[PATCH v2 1/5] ARM: OMAP4: remove control module address space from PHY and OTG

[Kishon Vijay Abraham I]

Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 793f54a..624a7e8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
 		.end		= 0x4a0ae000,
 		.flags		= IORESOURCE_MEM,
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.name		= "ctrl_dev",
-		.start		= 0x4a002300,
-		.end		= 0x4a002303,
-		.flags		= IORESOURCE_MEM,
-	},
 	{ }
 };
 
@@ -6156,12 +6149,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 		.pa_end		= 0x4a0ab7ff,
 		.flags		= ADDR_TYPE_RT
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.pa_start	= 0x4a00233c,
-		.pa_end		= 0x4a00233f,
-		.flags		= ADDR_TYPE_RT
-	},
 	{ }
 };
 
-- 
1.7.10.4

[PATCH v2 2/5] ARM: OMAP: devices: create device for usb part of control module

[Kishon Vijay Abraham I]

A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 626f3ea..6cda103 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,6 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/omap_ocp2scp.h>
+#include <linux/usb/omap_control_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
 #endif
 }
 
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
+static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
+	.type = 1,
+};
+
+struct resource omap4_control_usb_res[] = {
+	{
+		.name	= "control_dev_conf",
+		.start	= 0x4a002300,
+		.end	= 0x4a002303,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "otghs_control",
+		.start	= 0x4a00233c,
+		.end	= 0x4a00233f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap4_control_usb = {
+	.name = "omap-control-usb",
+	.id = -1,
+	.dev = {
+		.platform_data = &omap4_control_usb_pdata,
+	},
+	.num_resources = 2,
+	.resource = omap4_control_usb_res,
+};
+
+static inline void __init omap_init_control_usb(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	if (platform_device_register(&omap4_control_usb))
+		pr_err("Error registering omap_control_usb device\n");
+}
+
+#else
+static inline void omap_init_control_usb(void) { }
+#endif /* CONFIG_OMAP_CONTROL_USB */
+
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -721,6 +765,7 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
+		omap_init_control_usb();
 		omap_init_dmic();
 		omap_init_mcpdm();
 		omap_init_mcspi();
-- 
1.7.10.4

[PATCH v2 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Kishon Vijay Abraham I]

Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    2 ++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 7b33b37..9d27e3f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap44xx())
+		musb_plat.has_mailbox = true;
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb50525..053c268 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,6 +99,8 @@ struct musb_hdrc_platform_data {
 	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
 	u8		mode;
 
+	u8		has_mailbox:1;
+
 	/* for clk_get() */
 	const char	*clock;
 
-- 
1.7.10.4

[PATCH v2 4/5] ARM: OMAP: USB: Add phy binding information

[Kishon Vijay Abraham I]

This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 17 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 4815ea6..1337f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
 	omap_hsmmc_init(mmc);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bb73afc..8a2e242 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..8e8efcc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..f1172f2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_display();
 	omap_twl4030_audio_init("cm-t3x");
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..77cade52 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
 
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..15e5881 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
 	omap_serial_init();
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 0869f4f..3b5510a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..4616f92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a198b61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,6 +41,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/export.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2a065ba..9409eb8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index a53a668..1ac3e81 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 53a6cbc..63cb204 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 263cb9c..6b22ce3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
 
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 769c1fe..40184cc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..7e43ff3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
 				  mt46h32m32lf6_sdrc_params);
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c777b7..f8a272c 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -18,6 +18,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 26e07ad..dc5498b 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();
-- 
1.7.10.4

[PATCH v2 5/5] usb: omap_control_usb: fix compile warning

[Kishon Vijay Abraham I]

From: Felipe Balbi <balbi@ti.com>

When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/usb/omap_control_usb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index f306db7..27b5b8c 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -70,7 +70,7 @@ extern void omap_control_usb3_phy_power(struct device *dev, bool on);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-static inline struct device *omap_get_control_dev()
+static inline struct device *omap_get_control_dev(void)
 {
 	return ERR_PTR(-ENODEV);
 }
-- 
1.7.10.4

[PATCH v2 0/5] Generic PHY Framework

[Kishon Vijay Abraham I]

Added a generic PHY framework that provides a set of APIs for the PHY drivers
to create/destroy a PHY and APIs for the PHY users to obtain a reference to
the PHY with or without using phandle. To obtain a reference to the PHY
without using phandle, the platform specfic intialization code (say from board
file) should have already called phy_bind with the binding information. The
binding information consists of phy's device name, phy user device name and an
index. The index is used when the same phy user binds to mulitple phys.

This framework will be of use only to devices that uses external PHY (PHY
functionality is not embedded within the controller).

The intention of creating this framework is to bring the phy drivers spread
all over the Linux kernel to drivers/phy to increase code re-use and to
increase code maintainability.

Comments to make PHY as bus wasn't done because PHY devices can be part of
other bus and making a same device attached to multiple bus leads to bad
design.

Changes from v1:
* Added Documentation for the PHY framework
* Added few more APIs mostly w.r.t devres
* Modified omap-usb2 and twl4030 to make use of the new framework

Did USB enumeration testing in panda and beagle.

Kishon Vijay Abraham I (5):
  drivers: phy: add generic PHY framework
  usb: phy: omap-usb2: use the new generic PHY framework
  usb: otg: twl4030: use the new generic PHY framework
  ARM: OMAP: USB: Add phy binding information
  usb: musb: omap2430: use the new generic PHY framework

 Documentation/ABI/testing/sysfs-class-phy    |   15 +
 Documentation/phy.txt                        |  113 ++++++
 MAINTAINERS                                  |    7 +
 arch/arm/mach-omap2/board-2430sdp.c          |    2 +
 arch/arm/mach-omap2/board-3430sdp.c          |    2 +
 arch/arm/mach-omap2/board-4430sdp.c          |    2 +
 arch/arm/mach-omap2/board-cm-t35.c           |    2 +
 arch/arm/mach-omap2/board-devkit8000.c       |    2 +
 arch/arm/mach-omap2/board-igep0020.c         |    2 +
 arch/arm/mach-omap2/board-ldp.c              |    2 +
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 +
 arch/arm/mach-omap2/board-omap3evm.c         |    2 +
 arch/arm/mach-omap2/board-omap3logic.c       |    2 +
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 +
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 +
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 +
 arch/arm/mach-omap2/board-omap4panda.c       |    2 +
 arch/arm/mach-omap2/board-overo.c            |    2 +
 arch/arm/mach-omap2/board-rm680.c            |    2 +
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 +
 drivers/Kconfig                              |    2 +
 drivers/Makefile                             |    2 +
 drivers/phy/Kconfig                          |   13 +
 drivers/phy/Makefile                         |    5 +
 drivers/phy/phy-core.c                       |  519 ++++++++++++++++++++++++++
 drivers/usb/musb/musb_core.h                 |    2 +
 drivers/usb/musb/omap2430.c                  |   22 +-
 drivers/usb/otg/twl4030-usb.c                |   41 ++
 drivers/usb/phy/omap-usb2.c                  |   49 +++
 include/linux/phy/phy.h                      |  198 ++++++++++
 include/linux/usb/omap_usb.h                 |    3 +
 31 files changed, 1019 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-phy
 create mode 100644 Documentation/phy.txt
 create mode 100644 drivers/phy/Kconfig
 create mode 100644 drivers/phy/Makefile
 create mode 100644 drivers/phy/phy-core.c
 create mode 100644 include/linux/phy/phy.h

-- 
1.7.10.4

[PATCH v2 4/5] ARM: OMAP: USB: Add phy binding information

[Kishon Vijay Abraham I]

In order for controllers to get PHY in case of non dt boot, the phy
binding information should be added in the platform specific
initialization code using phy_bind. The previously added usb_bind_phy
can't be removed yet because the musb controller continues to use the
old PHY library which has OTG in it (struct usb_phy has struct usb_otg
as member). Until we have a separate OTG state machine to handle all of
that, the new generic PHY framework and the old phy library will co-exist.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 17 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1337f2c..a28cc5b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -265,6 +266,7 @@ static void __init omap_2430sdp_init(void)
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 8a2e242..a4f4b8e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -26,6 +26,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -581,6 +582,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e8efcc..d5bc353 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -29,6 +29,7 @@
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -698,6 +699,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_twl6030_hsmmc_init(mmc);
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+	phy_bind("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index f1172f2..6860dc9 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -31,6 +31,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -726,6 +727,7 @@ static void __init cm_t3x_common_init(void)
 	omap_twl4030_audio_init("cm-t3x");
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77cade52..89c3e64 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -624,6 +625,7 @@ static void __init devkit8000_init(void)
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 15e5881..2ef8b31 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -627,6 +628,7 @@ static void __init igep_init(void)
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3b5510a..c2d8cbd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -29,6 +29,7 @@
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -420,6 +421,7 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4616f92..6f17343 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -31,6 +31,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -521,6 +522,7 @@ static void __init omap3_beagle_init(void)
 				  mt46h32m32lf6_sdrc_params);
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a198b61..bfd3927 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -42,6 +42,7 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -736,6 +737,7 @@ static void __init omap3_evm_init(void)
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 9409eb8..64d4daf 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -30,6 +30,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -217,6 +218,7 @@ static void __init omap3logic_init(void)
 	board_smsc911x_init();
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1ac3e81..b391107 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -36,6 +36,7 @@
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -603,6 +604,7 @@ static void __init omap3pandora_init(void)
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 63cb204..8f22977 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -34,6 +34,7 @@
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -406,6 +407,7 @@ static void __init omap3_stalker_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 6b22ce3..acd82e4 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -367,6 +368,7 @@ static void __init omap3_touchbook_init(void)
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 40184cc..7fe4363 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -449,6 +450,7 @@ static void __init omap4_panda_init(void)
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+	phy_bind("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7e43ff3..92835cc 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,6 +37,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -501,6 +502,7 @@ static void __init overo_init(void)
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index f8a272c..ed854ca 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -19,6 +19,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -136,6 +137,7 @@ static void __init rm680_init(void)
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index dc5498b..2093e25 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -21,6 +21,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -300,6 +301,7 @@ void __init zoom_peripherals_init(void)
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
+	phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();
-- 
1.7.10.4