[PATCH] clk: tegra30: fix wrong clock index between se to sata_cold

[PATCH] clk: tegra30: fix wrong clock index between se to sata_cold

[Joseph Lo]

The index of se should be 127. And the previous clock index was 125. So
we need to set up the index for se to get the correct index between se
to sata_cold.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
 drivers/clk/tegra/clk-tegra30.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index a163812..1d41b35 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -332,9 +332,9 @@ enum tegra30_clk {
 	cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
 	i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x,
 	atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x,
-	spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, se,
-	hda2hdmi, sata_cold, uartb = 160, vfir, spdif_out, spdif_in, vi,
-	vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2,
+	spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda,
+	se = 127, hda2hdmi, sata_cold, uartb = 160, vfir, spdif_out, spdif_in,
+	vi, vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2,
 	clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_m, pll_m_out1, pll_p,
 	pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_a, pll_a_out0,
 	pll_d, pll_d_out0, pll_d2, pll_d2_out0, pll_u, pll_x, pll_x_out0, pll_e,
-- 
1.8.1.1

[PATCH] clk: tegra30: fix wrong clock index between se to sata_cold

[Stephen Warren]

On 02/06/2013 10:07 PM, Joseph Lo wrote:
> The index of se should be 127. And the previous clock index was 125. So
> we need to set up the index for se to get the correct index between se
> to sata_cold.

I've applied this to Tegra's for-3.9/soc-ccf-fixes branch, on the
assumption Mike is OK with it. I'll hold a pull request for his ack, and
probably for a day or too in case any more clk-related fixes show up.

[PATCH] clk: tegra30: fix wrong clock index between se to sata_cold

[Mike Turquette]

Quoting Stephen Warren (2013-02-07 11:14:38)
> On 02/06/2013 10:07 PM, Joseph Lo wrote:
> > The index of se should be 127. And the previous clock index was 125. So
> > we need to set up the index for se to get the correct index between se
> > to sata_cold.
> 
> I've applied this to Tegra's for-3.9/soc-ccf-fixes branch, on the
> assumption Mike is OK with it. I'll hold a pull request for his ack, and
> probably for a day or too in case any more clk-related fixes show up.

Acked-by: Mike Turquette <mturquette@linaro.org>