From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/10] USB: EHCI: make ehci-vt8500 a separate driver
Date: Fri, 08 Feb 2013 07:54:18 +1300 [thread overview]
Message-ID: <1360263258.25382.4.camel@gitbox> (raw)
In-Reply-To: <5113e626.c84e420a.08c3.ffffbf07@mx.google.com>
On Thu, 2013-02-07 at 23:04 +0530, manjunath.goudar at linaro.org wrote:
> From: Manjunath Goudar <manjunath.goudar@linaro.org>
>
> Separate the vt8500 host controller driver from ehci-hcd host code
> into its own driver module.
>
> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
> Cc: Greg KH <greg@kroah.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: Tony Prisk <linux@prisktech.co.nz>
> Cc: Alexey Charkov <alchark@gmail.com>
> Cc: linux-usb at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> ---
> drivers/usb/host/Kconfig | 8 +++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-hcd.c | 5 ---
> drivers/usb/host/ehci-vt8500.c | 73 ++++++++++++++++++----------------------
> 4 files changed, 42 insertions(+), 45 deletions(-)
>
...
> diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
> index 11695d5..ff4e3ae 100644
> --- a/drivers/usb/host/ehci-vt8500.c
> +++ b/drivers/usb/host/ehci-vt8500.c
> @@ -16,52 +16,25 @@
...
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_AUTHOR("Alexey Charkov");
> +MODULE_LICENSE("GPL");
Should be "GPL v2" as per the license header.
> MODULE_ALIAS("platform:vt8500-ehci");
> MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
Regards
Tony Prisk
next prev parent reply other threads:[~2013-02-07 18:54 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yes>
2010-08-11 5:21 ` [PATCH v3] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-08-11 7:27 ` Russell King - ARM Linux
2011-06-15 0:46 ` [PATCH] Add ok2440 development board support Wu DaoGuang
2011-06-22 5:55 ` [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-07-06 12:20 ` Daniel Mack
2011-07-06 12:44 ` Eric Miao
2011-07-21 4:54 ` [PATCHV2] OMAP4: OPP: add OMAP4460 definitions Vishwanath BS
[not found] ` <4e27b0d0.100e8e0a.43e0.ffffe6d9SMTPIN_ADDED@mx.google.com>
2011-07-21 4:56 ` Vishwanath Sripathy
2011-10-03 0:32 ` [PATCH 1/1] ARM: Make debug UART optional for S3C devices Thiago A. Correa
2011-10-10 14:44 ` Thiago A. Corrêa
2013-02-07 17:33 ` [PATCH 00/10] usb: ehci: more bus glues as separate modules manjunath.goudar at linaro.org
2013-02-07 20:13 ` Ezequiel Garcia
2013-02-08 15:23 ` Alan Stern
[not found] ` <1360258447-27247-1-git-send-email-yes>
2013-02-07 17:33 ` [PATCH 01/10] USB:Changed omap2plus_defconfig to support OMAP USB static driver manjunath.goudar at linaro.org
2013-02-07 17:33 ` [PATCH 02/10] USB: EHCI: make ehci-omap a separate driver manjunath.goudar at linaro.org
2013-02-08 7:42 ` Felipe Balbi
2013-02-08 8:56 ` Roger Quadros
2013-02-07 17:34 ` [PATCH 03/10] USB: EHCI: make ehci-spear " manjunath.goudar at linaro.org
2013-02-08 4:27 ` Viresh Kumar
2013-02-07 17:34 ` [PATCH 04/10] USB: EHCI: make ehci-orion " manjunath.goudar at linaro.org
2013-02-07 19:41 ` Arnd Bergmann
2013-02-08 10:38 ` Florian Fainelli
2013-02-07 17:34 ` [PATCH 05/10] USB: EHCI: make ehci-atmel " manjunath.goudar at linaro.org
2013-02-08 2:58 ` Bo Shen
2013-06-12 11:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-07 17:34 ` [PATCH 06/10] USB: EHCI: make ehci-s5p " manjunath.goudar at linaro.org
2013-02-07 18:49 ` Stephen Warren
2013-02-07 17:34 ` [PATCH 07/10] USB: EHCI: make ehci-mv " manjunath.goudar at linaro.org
2013-02-07 17:34 ` [PATCH 08/10] USB: EHCI: make ehci-vt8500 " manjunath.goudar at linaro.org
2013-02-07 18:54 ` Tony Prisk [this message]
2013-02-07 17:34 ` [PATCH 09/10] USB: EHCI: make ehci-msm " manjunath.goudar at linaro.org
2013-02-07 18:48 ` Stephen Warren
2013-02-07 19:05 ` David Brown
2013-02-07 17:34 ` [PATCH 10/10] USB: EHCI: make ehci-w90X900 " manjunath.goudar at linaro.org
2013-06-10 9:17 ` [PATCH v2 00/11] ARM:STixxxx: Add STixxxx platform and board support Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 01/11] serial:st-asc: Add ST ASC driver Srinivas KANDAGATLA
2013-06-10 9:35 ` Russell King - ARM Linux
2013-06-10 11:53 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 02/11] clocksource:global_timer: Add ARM global timer support Srinivas KANDAGATLA
2013-06-10 13:13 ` Linus Walleij
2013-06-10 13:41 ` Srinivas KANDAGATLA
2013-06-11 14:05 ` Srinivas KANDAGATLA
2013-06-11 20:13 ` Linus Walleij
2013-06-12 10:45 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 03/11] regmap: Add regmap_field APIs Srinivas KANDAGATLA
2013-06-11 10:48 ` Mark Brown
2013-06-11 11:36 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 04/11] mfd:stixxxx-syscfg: Add ST System Configuration support Srinivas KANDAGATLA
2013-06-10 13:16 ` Linus Walleij
2013-06-10 13:52 ` Srinivas KANDAGATLA
2013-06-10 14:02 ` Arnd Bergmann
2013-06-10 15:51 ` Srinivas KANDAGATLA
2013-06-11 7:41 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 05/11] pinctrl:stixxxx: Add pinctrl and pinconf support Srinivas KANDAGATLA
2013-06-16 12:17 ` Linus Walleij
2013-06-17 13:31 ` Srinivas KANDAGATLA
2013-06-17 16:27 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 07/11] ARM:stixxxx: Add STiH416 SOC support Srinivas KANDAGATLA
2013-06-10 13:52 ` Arnd Bergmann
2013-06-10 16:17 ` Srinivas KANDAGATLA
2013-06-14 7:12 ` Srinivas KANDAGATLA
2013-06-19 18:34 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 08/11] ARM:stixxxx: Add DEBUG_LL console support Srinivas KANDAGATLA
2013-06-10 9:27 ` [PATCH v2 09/11] ARM:stixxxx: Add stixxxx options to multi_v7_defconfig Srinivas KANDAGATLA
2013-06-10 10:40 ` Mark Rutland
2013-06-10 10:58 ` Srinivas KANDAGATLA
2013-06-10 13:15 ` Mark Rutland
2013-06-13 9:24 ` Srinivas KANDAGATLA
2013-06-17 9:32 ` Mark Rutland
2013-06-10 9:28 ` [PATCH v2 10/11] ARM:stih41x: Add B2000 board support Srinivas KANDAGATLA
2013-06-10 9:28 ` [PATCH v2 11/11] ARM:stih41x: Add B2020 " Srinivas KANDAGATLA
[not found] ` <1370856381-6644-1-git-send-email-srinivas.kandagatla@st.com>
2013-06-10 9:55 ` [PATCH v2 06/11] ARM:stixxxx: Add STiH415 SOC support Michal Simek
2013-06-10 11:08 ` Michal Simek
[not found] ` <CAHTX3d+dk3W_9b7SVUokWq4KYXnj=Z1=WPj5zJ-gUvJqqwE=+Q@mail.gmail.com>
2013-06-10 11:46 ` Srinivas KANDAGATLA
2013-06-10 23:19 ` Russell King - ARM Linux
2013-06-11 6:50 ` Srinivas KANDAGATLA
2013-06-13 11:56 ` Russell King - ARM Linux
2013-06-13 12:41 ` Srinivas KANDAGATLA
2013-06-13 12:47 ` Linus Walleij
2013-06-10 12:43 ` Linus Walleij
2013-06-10 16:38 ` Srinivas KANDAGATLA
2013-06-14 7:31 ` Srinivas KANDAGATLA
2013-06-19 18:59 ` Linus Walleij
2014-10-29 20:28 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 1/4] ARM: keystone: add pcie related options Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 2/4] ARM: keystone: defconfig: add options to enable PCI controller Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0 Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 Murali Karicheri
2014-10-29 21:10 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs santosh shilimkar
2011-05-02 5:59 ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 1/3] ARM: pxa168: Add support for UART3 Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 2/3] ARM: pxa168: Add support for Ethernet Tanmay Upadhyay
2011-06-10 13:31 ` Eric Miao
2011-05-02 6:00 ` [PATCH 3/3] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-06-20 5:55 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360263258.25382.4.camel@gitbox \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).