From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] clocksource: tegra20: use the device_node pointer passed to init
Date: Thu, 7 Feb 2013 13:09:04 -0600 [thread overview]
Message-ID: <1360264144-20714-5-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1360264144-20714-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
We've already matched the node, so use the node pointer passed in. The rtc
init was intermingled with the timer init, so split this out to a separate
init function.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
Stephen,
It doesn't seem like there are any init ordering issues to me, but please
test/comment.
Rob
drivers/clocksource/tegra20_timer.c | 70 ++++++++++++++---------------------
1 file changed, 27 insertions(+), 43 deletions(-)
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 0bde03f..15cc723 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = {
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void)
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -262,9 +221,34 @@ static void __init tegra20_init_timer(void)
#ifdef CONFIG_HAVE_ARM_TWD
twd_local_timer_of_register();
#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = clk_get_sys("rtc-tegra", NULL);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
--
1.7.10.4
next prev parent reply other threads:[~2013-02-07 19:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 19:09 [PATCH 0/4] Improve CLKSRC_OF matching Rob Herring
2013-02-07 19:09 ` [PATCH 1/4] clocksource: pass DT node pointer to init functions Rob Herring
2013-02-13 16:21 ` Michal Simek
2013-02-13 16:33 ` Rob Herring
2013-02-13 17:33 ` Michal Simek
2013-02-14 1:30 ` Rob Herring
2013-02-14 6:45 ` Michal Simek
2013-02-14 14:22 ` Rob Herring
2013-02-07 19:09 ` [PATCH 2/4] clocksource: bcm2835: use the device_node pointer passed to init Rob Herring
2013-02-09 3:47 ` Stephen Warren
2013-02-07 19:09 ` [PATCH 3/4] clocksource: vt8500: " Rob Herring
2013-02-07 19:09 ` Rob Herring [this message]
2013-02-07 19:39 ` [PATCH 4/4] clocksource: tegra20: " Stephen Warren
2013-02-07 20:05 ` Hiroshi Doyu
2013-02-07 22:44 ` [PATCH 0/4] Improve CLKSRC_OF matching Arnd Bergmann
2013-02-07 23:36 ` Rob Herring
2013-02-07 23:45 ` Arnd Bergmann
2013-02-08 4:51 ` Tony Prisk
2013-02-08 13:07 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360264144-20714-5-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).