linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 1/9] Revert "USB: chipidea: add vbus detect for udc"
Date: Sun, 17 Feb 2013 17:24:35 +0800	[thread overview]
Message-ID: <1361093083-22940-2-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1361093083-22940-1-git-send-email-peter.chen@freescale.com>

vbus register is at otgsc, and vbus detect does not belong
to device function. Revert this patch, and will move
vbus detect function to drivers/usb/chipidea/udc.c

This reverts commit 8c4fc031954b4eb72daf13d3c907a985a3eee208.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/ci.h  |    1 -
 drivers/usb/chipidea/udc.c |   39 +--------------------------------------
 2 files changed, 1 insertions(+), 39 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index e25d126..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -139,7 +139,6 @@ struct ci13xxx {
 	enum ci_role			role;
 	bool				is_otg;
 	struct work_struct		work;
-	struct work_struct		vbus_work;
 	struct workqueue_struct		*wq;
 
 	struct dma_pool			*qh_pool;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 2f45bba..d214448 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -305,18 +305,6 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
 	return reg;
 }
 
-static void hw_enable_vbus_intr(struct ci13xxx *ci)
-{
-	hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS);
-	hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE);
-	queue_work(ci->wq, &ci->vbus_work);
-}
-
-static void hw_disable_vbus_intr(struct ci13xxx *ci)
-{
-	hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0);
-}
-
 /**
  * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
  *                                interruption)
@@ -383,16 +371,6 @@ static int hw_usb_reset(struct ci13xxx *ci)
 	return 0;
 }
 
-static void vbus_work(struct work_struct *work)
-{
-	struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work);
-
-	if (hw_read(ci, OP_OTGSC, OTGSC_AVV))
-		usb_gadget_vbus_connect(&ci->gadget);
-	else
-		usb_gadget_vbus_disconnect(&ci->gadget);
-}
-
 /******************************************************************************
  * UTIL block
  *****************************************************************************/
@@ -1392,7 +1370,6 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
 			hw_device_reset(ci, USBMODE_CM_DC);
-			hw_enable_vbus_intr(ci);
 			hw_device_state(ci, ci->ep0out->qh.dma);
 		} else {
 			hw_device_state(ci, 0);
@@ -1567,10 +1544,8 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 	pm_runtime_get_sync(&ci->gadget.dev);
 	if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
 		if (ci->vbus_active) {
-			if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
+			if (ci->platdata->flags & CI13XXX_REGS_SHARED)
 				hw_device_reset(ci, USBMODE_CM_DC);
-				hw_enable_vbus_intr(ci);
-			}
 		} else {
 			pm_runtime_put_sync(&ci->gadget.dev);
 			goto done;
@@ -1676,13 +1651,6 @@ static irqreturn_t udc_irq(struct ci13xxx *ci)
 	} else {
 		retval = IRQ_NONE;
 	}
-
-	intr = hw_read(ci, OP_OTGSC, ~0);
-	hw_write(ci, OP_OTGSC, ~0, intr);
-
-	if (intr & (OTGSC_AVVIE & OTGSC_AVVIS))
-		queue_work(ci->wq, &ci->vbus_work);
-
 	spin_unlock(&ci->lock);
 
 	return retval;
@@ -1758,7 +1726,6 @@ static int udc_start(struct ci13xxx *ci)
 		retval = hw_device_reset(ci, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
-		hw_enable_vbus_intr(ci);
 	}
 
 	retval = device_register(&ci->gadget.dev);
@@ -1821,9 +1788,6 @@ static void udc_stop(struct ci13xxx *ci)
 	if (ci == NULL)
 		return;
 
-	hw_disable_vbus_intr(ci);
-	cancel_work_sync(&ci->vbus_work);
-
 	usb_del_gadget_udc(&ci->gadget);
 
 	destroy_eps(ci);
@@ -1864,7 +1828,6 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci)
 	rdrv->irq	= udc_irq;
 	rdrv->name	= "gadget";
 	ci->roles[CI_ROLE_GADGET] = rdrv;
-	INIT_WORK(&ci->vbus_work, vbus_work);
 
 	return 0;
 }
-- 
1.7.0.4

  reply	other threads:[~2013-02-17  9:24 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-17  9:24 [PATCH v9 0/9] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
2013-02-17  9:24 ` Peter Chen [this message]
2013-02-17  9:24 ` [PATCH v9 2/9] usb: chipidea: add otg file Peter Chen
2013-02-17  9:24 ` [PATCH v9 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect Peter Chen
2013-02-17  9:24 ` [PATCH v9 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state Peter Chen
2013-02-17  9:24 ` [PATCH v9 5/9] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS Peter Chen
2013-02-17  9:24 ` [PATCH v9 6/9] usb: chipidea: imx: add internal vbus regulator control Peter Chen
2013-02-17  9:24 ` [PATCH v9 7/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget Peter Chen
2013-02-17  9:24 ` [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result Peter Chen
2013-02-26  9:42   ` Felipe Balbi
2013-02-27  2:22     ` Peter Chen
2013-02-27 12:12       ` Felipe Balbi
2013-02-28  3:11         ` Peter Chen
2013-02-28  7:26           ` Felipe Balbi
2013-02-28  8:31             ` Peter Chen
2013-02-28  8:49               ` Felipe Balbi
2013-02-28  9:32                 ` Alexander Shishkin
2013-02-28 10:06                   ` Peter Chen
2013-02-28 10:45                     ` Felipe Balbi
2013-03-01  1:45                       ` Peter Chen
2013-03-01  6:29                         ` Felipe Balbi
2013-02-28 10:42                   ` Felipe Balbi
2013-02-28 11:55                     ` Alexander Shishkin
2013-03-01  6:36                       ` Felipe Balbi
2013-02-17  9:24 ` [PATCH v9 9/9] usb: chipidea: imx: fix the error that using uninitialized pointer Peter Chen
2013-02-26  9:36 ` [PATCH v9 0/9] Add tested id switch and vbus connect detect support for Chipidea Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361093083-22940-2-git-send-email-peter.chen@freescale.com \
    --to=peter.chen@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).