From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 7/9] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget
Date: Sun, 17 Feb 2013 17:24:41 +0800 [thread overview]
Message-ID: <1361093083-22940-8-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1361093083-22940-1-git-send-email-peter.chen@freescale.com>
When we rmmod gadget, the ci->driver needs to be cleared.
Otherwise, we plug in usb cable again, the driver will
consider gadget is there, in fact, it is removed.
Besides, consolidate the calling of ci->driver->disconnect, when
we do rmmod gadget, the gadget's disconnect should be called from
udc core.
Below is the oops this patch fixes.
root at freescale ~$ ci_hdrc ci_hdrc.0: Connected to host
Unable to handle kernel paging request at virtual address 7f01171c
pgd = 80004000
[7f01171c] *pgd=4fa1e811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] SMP ARM
Modules linked in: f_acm libcomposite u_serial [last unloaded: g_serial]
CPU: 0 Not tainted (3.8.0-rc5+ #221)
PC is at _gadget_stop_activity+0xbc/0x128
LR is at ep_fifo_flush+0x68/0xa0
pc : [<803634cc>] lr : [<80363938>] psr: 20000193
sp : 806c7dc8 ip : 00000000 fp : 806c7de4
r10: 00000000 r9 : 80710ea4 r8 : 00000000
r7 : bf834094 r6 : bf834098 r5 : bf834010 r4 : bf8340a0
r3 : 7f011708 r2 : 01940194 r1 : a0000193 r0 : bf834014
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 4f06404a DAC: 00000017
Process swapper/0 (pid: 0, stack limit = 0x806c6238)
Stack: (0x806c7dc8 to 0x806c8000)
7dc0: bf834010 bf809950 bf834010 0000004b 806c7e44 806c7de8
7de0: 80365400 8036341c 0000ec1c 00000000 0000ec1c 00000040 fff5ede0 bf834014
7e00: 000a1220 00000000 0000002e ffffd958 806c7e3c 806c7e20 8004e870 bf834010
7e20: bf809950 0000004b 0000004b 00000000 80710ea4 00000000 806c7e5c 806c7e48
7e40: 80362888 80365154 bfb35180 bf809950 806c7e9c 806c7e60 8008111c 803627f4
7e60: 00989680 00000000 bf809900 bf809964 812df8c0 bf809900 bf809950 806c3f2c
7e80: 0000004b 00000000 412fc09a 00000000 806c7eb4 806c7ea0 80081368 800810b8
7ea0: bf809900 bf809950 806c7ecc 806c7eb8 800843c8 8008130c 0000004b 806cf748
7ec0: 806c7ee4 806c7ed0 80081088 8008432c 806c6000 806cf748 806c7f0c 806c7ee8
7ee0: 8000fa44 8008105c f400010c 806ce974 806c7f30 f4000110 806d29e8 412fc09a
7f00: 806c7f2c 806c7f10 80008584 8000f9f4 8000fbd0 60000013 ffffffff 806c7f64
7f20: 806c7f84 806c7f30 8000eac0 80008554 00000000 00000000 0000000f 8001aea0
7f40: 806c6000 80712a48 804f0040 00000000 806d29e8 412fc09a 00000000 806c7f84
7f60: 806c7f88 806c7f78 8000fbcc 8000fbd0 60000013 ffffffff 806c7fac 806c7f88
7f80: 8001015c 8000fb9c 806cf5b0 80712980 806a4528 8fffffff 1000406a 412fc09a
7fa0: 806c7fbc 806c7fb0 804e5334 800100ac 806c7ff4 806c7fc0 80668940 804e52d4
7fc0: ffffffff ffffffff 806684bc 00000000 00000000 806a4528 10c53c7d 806ce94c
7fe0: 806a4524 806d29dc 00000000 806c7ff8 10008078 806686b0 00000000 00000000
Backtrace:
[<80363410>] (_gadget_stop_activity+0x0/0x128) from [<80365400>] (udc_irq+0x2b8/0xf38)
r7:0000004b r6:bf834010 r5:bf809950 r4:bf834010
[<80365148>] (udc_irq+0x0/0xf38) from [<80362888>] (ci_irq+0xa0/0xf4)
[<803627e8>] (ci_irq+0x0/0xf4) from [<8008111c>] (handle_irq_event_percpu+0x70/0x254)
r5:bf809950 r4:bfb35180
[<800810ac>] (handle_irq_event_percpu+0x0/0x254) from [<80081368>] (handle_irq_event+0x68/0x88)
[<80081300>] (handle_irq_event+0x0/0x88) from [<800843c8>] (handle_fasteoi_irq+0xa8/0x178)
r5:bf809950 r4:bf809900
[<80084320>] (handle_fasteoi_irq+0x0/0x178) from [<80081088>] (generic_handle_irq+0x38/0x40)
r5:806cf748 r4:0000004b
[<80081050>] (generic_handle_irq+0x0/0x40) from [<8000fa44>] (handle_IRQ+0x5c/0xbc)
r5:806cf748 r4:806c6000
[<8000f9e8>] (handle_IRQ+0x0/0xbc) from [<80008584>] (gic_handle_irq+0x3c/0x70)
r9:412fc09a r8:806d29e8 r7:f4000110 r6:806c7f30 r5:806ce974
r4:f400010c
[<80008548>] (gic_handle_irq+0x0/0x70) from [<8000eac0>] (__irq_svc+0x40/0x54)
Exception stack(0x806c7f30 to 0x806c7f78)
7f20: 00000000 00000000 0000000f 8001aea0
7f40: 806c6000 80712a48 804f0040 00000000 806d29e8 412fc09a 00000000 806c7f84
7f60: 806c7f88 806c7f78 8000fbcc 8000fbd0 60000013 ffffffff
r7:806c7f64 r6:ffffffff r5:60000013 r4:8000fbd0
[<8000fb90>] (default_idle+0x0/0x4c) from [<8001015c>] (cpu_idle+0xbc/0xf8)
[<800100a0>] (cpu_idle+0x0/0xf8) from [<804e5334>] (rest_init+0x6c/0x84)
r9:412fc09a r8:1000406a r7:8fffffff r6:806a4528 r5:80712980
r4:806cf5b0
[<804e52c8>] (rest_init+0x0/0x84) from [<80668940>] (start_kernel+0x29c/0x2ec)
[<806686a4>] (start_kernel+0x0/0x2ec) from [<10008078>] (0x10008078)
Code: e12fff33 e5953200 e3530000 0a000002 (e5933014)
---[ end trace aade28ad434062bd ]---
Kernel panic - not syncing: 0xbf8bdfa8)
df60: 00000000 00000000 0000000f 8001aea0 bf8bc000 80712a48 804f0040 00000000
df80: 806d29e8 412fc09a 00000000 bf8bdfb4 bf8bdfb8 bf8bdfa8 8000fbcc 8000fbd0
dfa0: 60000013 ffffffff
r7:bf8bdf94 r6:ffffffff r5:60000013 r4:8000fbd0
[<8000fb90>] (default_idle+0x0/0x4c) from [<8001015c>] (cpu_idle+0xbc/0xf8)
[<800100a0>] (cpu_idle+0x0/0xf8) from [<804e7930>] (secondary_start_kernel+0x120/0x148)
r9:412fc09a r8:1000406a r7:80712d20 r6:10c03c7d r5:00000002
r4:806e2008
[<804e7810>] (secondary_start_kernel+0x0/0x148) from [<104e7148>] (0x104e7148)
r5:0000001f r4:4f8a806a
CPU3: stopping
Backtrace:
[<800132e8>] (dump_backtrace+0x0/0x114) from [<804ea684>] (dump_stack+0x20/0x24)
r7:00000000 r6:806c3f2c r5:806cf748 r4:80712d18
[<804ea664>] (dump_stack+0x0/0x24) from [<80014adc>] (handle_IPI+0x140/0x18c)
[<8001499c>] (handle_IPI+0x0/0x18c) from [<800085b0>] (gic_handle_irq+0x68/0x70)
r9:412fc09a r8:806d29e8 r7:f4000110 r6:bf8bff60 r5:806ce974
r4:f400010c
[<80008548>] (gic_handle_irq+0x0/0x70) from [<8000eac0>] (__irq_svc+0x40/0x54)
Exception stack(0xbf8bff60 to 0xbf8bffa8)
ff60: 00000000 00000000 0000000f 8001aea0 bf8be000 80712a48 804f0040 00000000
ff80: 806d29e8 412fc09a 00000000 bf8bffb4 bf8bffb8 bf8bffa8 8000fbcc 8000fbd0
ffa0: 60000013 ffffffff
r7:bf8bff94 r6:ffffffff r5:60000013 r4:8000fbd0
[<8000fb90>] (default_idle+0x0/0x4c) from [<8001015c>] (cpu_idle+0xbc/0xf8)
[<800100a0>] (cpu_idle+0x0/0xf8) from [<804e7930>] (secondary_start_kernel+0x120/0x148)
r9:412fc09a r8:1000406a r7:80712d20 r6:10c03c7d r5:00000003
r4:806e2008
[<804e7810>] (secondary_start_kernel+0x0/0x148) from [<104e7148>] (0x104e7148)
r5:0000001f r4:4f8a806a
CPU1: stopping
Backtrace:
[<800132e8>] (dump_backtrace+0x0/0x114) from [<804ea684>] (dump_stack+0x20/0x24)
r7:00000000 r6:806c3f2c r5:806cf748 r4:80712d18
[<804ea664>] (dump_stack+0x0/0x24) from [<80014adc>] (handle_IPI+0x140/0x18c)
[<8001499c>] (handle_IPI+0x0/0x18c) from [<800085b0>] (gic_handle_irq+0x68/0x70)
r9:412fc09a r8:806d29e8 r7:f4000110 r6:bf8bbf60 r5:806ce974
r4:f400010c
[<80008548>] (gic_handle_irq+0x0/0x70) from [<8000eac0>] (__irq_svc+0x40/0x54)
Exception stack(0xbf8bbf60 to 0xbf8bbfa8)
bf60: 00000000 00000000 0000000f 8001aea0 bf8ba000 80712a48 804f0040 00000000
bf80: 806d29e8 412fc09a 00000000 bf8bbfb4 bf8bbfb8 bf8bbfa8 8000fbcc 8000fbd0
bfa0: 60000013 ffffffff
r7:bf8bbf94 r6:ffffffff r5:60000013 r4:8000fbd0
[<8000fb90>] (default_idle+0x0/0x4c) from [<8001015c>] (cpu_idle+0xbc/0xf8)
[<800100a0>] (cpu_idle+0x0/0xf8) from [<804e7930>] (secondary_start_kernel+0x120/0x148)
r9:412fc09a r8:1000406a r7:80712d20 r6:10c03c7d r5:00000001
r4:806e2008
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/usb/chipidea/udc.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b57b735..e355914 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -579,9 +579,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
usb_ep_fifo_flush(&ci->ep0out->ep);
usb_ep_fifo_flush(&ci->ep0in->ep);
- if (ci->driver)
- ci->driver->disconnect(gadget);
-
/* make sure to disable all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_disable(ep);
@@ -612,6 +609,11 @@ __acquires(ci->lock)
dbg_event(0xFF, "BUS RST", 0);
+ if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
+ }
+
spin_unlock(&ci->lock);
retval = _gadget_stop_activity(&ci->gadget);
if (retval)
@@ -1373,6 +1375,8 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
hw_device_state(ci, ci->ep0out->qh.dma);
dev_dbg(ci->dev, "Connected to host\n");
} else {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
@@ -1580,13 +1584,14 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
CI13XXX_CONTROLLER_STOPPED_EVENT);
- ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
_gadget_stop_activity(&ci->gadget);
spin_lock_irqsave(&ci->lock, flags);
pm_runtime_put(&ci->gadget.dev);
}
+ ci->driver = NULL;
+
spin_unlock_irqrestore(&ci->lock, flags);
return 0;
--
1.7.0.4
next prev parent reply other threads:[~2013-02-17 9:24 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-17 9:24 [PATCH v9 0/9] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
2013-02-17 9:24 ` [PATCH v9 1/9] Revert "USB: chipidea: add vbus detect for udc" Peter Chen
2013-02-17 9:24 ` [PATCH v9 2/9] usb: chipidea: add otg file Peter Chen
2013-02-17 9:24 ` [PATCH v9 3/9] usb: chipidea: add otg id switch and vbus connect/disconnect detect Peter Chen
2013-02-17 9:24 ` [PATCH v9 4/9] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state Peter Chen
2013-02-17 9:24 ` [PATCH v9 5/9] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS Peter Chen
2013-02-17 9:24 ` [PATCH v9 6/9] usb: chipidea: imx: add internal vbus regulator control Peter Chen
2013-02-17 9:24 ` Peter Chen [this message]
2013-02-17 9:24 ` [PATCH v9 8/9] usb: chipidea: tell platform layer the ci core probe's result Peter Chen
2013-02-26 9:42 ` Felipe Balbi
2013-02-27 2:22 ` Peter Chen
2013-02-27 12:12 ` Felipe Balbi
2013-02-28 3:11 ` Peter Chen
2013-02-28 7:26 ` Felipe Balbi
2013-02-28 8:31 ` Peter Chen
2013-02-28 8:49 ` Felipe Balbi
2013-02-28 9:32 ` Alexander Shishkin
2013-02-28 10:06 ` Peter Chen
2013-02-28 10:45 ` Felipe Balbi
2013-03-01 1:45 ` Peter Chen
2013-03-01 6:29 ` Felipe Balbi
2013-02-28 10:42 ` Felipe Balbi
2013-02-28 11:55 ` Alexander Shishkin
2013-03-01 6:36 ` Felipe Balbi
2013-02-17 9:24 ` [PATCH v9 9/9] usb: chipidea: imx: fix the error that using uninitialized pointer Peter Chen
2013-02-26 9:36 ` [PATCH v9 0/9] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361093083-22940-8-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).