From: thomas.abraham@linaro.org (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 13/16] ARM: dts: add clock provider information for all controllers in Exynos4 SoCs
Date: Mon, 18 Feb 2013 13:51:23 +0530 [thread overview]
Message-ID: <1361175686-19400-14-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1361175686-19400-1-git-send-email-thomas.abraham@linaro.org>
For all supported peripheral controllers on Exynos4 SoCs, add clock lookup
information.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/boot/dts/exynos4.dtsi | 50 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 2 +
arch/arm/boot/dts/exynos4412.dtsi | 2 +
3 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 1a02189..621f331 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -91,6 +91,8 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ clocks = <&clock 345>;
+ clock-names = "watchdog";
status = "disabled";
};
@@ -98,6 +100,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ clocks = <&clock 346>;
+ clock-names = "rtc";
status = "disabled";
};
@@ -105,6 +109,8 @@
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ clocks = <&clock 347>;
+ clock-names = "keypad";
status = "disabled";
};
@@ -112,6 +118,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ clocks = <&clock 297>, <&clock 145>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -119,6 +127,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ clocks = <&clock 298>, <&clock 146>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -126,6 +136,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ clocks = <&clock 299>, <&clock 147>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -133,6 +145,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ clocks = <&clock 300>, <&clock 148>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -148,6 +162,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 312>, <&clock 151>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -155,6 +171,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 313>, <&clock 152>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -162,6 +180,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -169,6 +189,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ clocks = <&clock 315>, <&clock 154>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -178,6 +200,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ clocks = <&clock 317>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -187,6 +211,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ clocks = <&clock 318>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -196,6 +222,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ clocks = <&clock 319>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -205,6 +233,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ clocks = <&clock 320>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -214,6 +244,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ clocks = <&clock 321>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -223,6 +255,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ clocks = <&clock 322>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -232,6 +266,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ clocks = <&clock 323>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -241,6 +277,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 324>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -252,6 +290,8 @@
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 327>, <&clock 159>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -263,6 +303,8 @@
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 328>, <&clock 160>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -274,6 +316,8 @@
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 329>, <&clock 161>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -288,18 +332,24 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 292>;
+ clock-names = "apb_pclk";
};
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ clocks = <&clock 293>;
+ clock-names = "apb_pclk";
};
mdma1: mdma at 12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 279>;
+ clock-names = "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 6b25095..072d3b2 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -55,6 +55,8 @@
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
mct_map: mct-map {
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 821c9fd..1ecc28d 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -34,6 +34,8 @@
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>, <6 0>, <7 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
mct_map: mct-map {
#interrupt-cells = <2>;
--
1.7.5.4
next prev parent reply other threads:[~2013-02-18 8:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-18 8:21 [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 01/16] clk: samsung: add common clock framework helper functions for Samsung platforms Thomas Abraham
2013-03-03 1:08 ` Heiko Stübner
2013-03-03 11:17 ` Sylwester Nawrocki
2013-03-03 11:45 ` Tomasz Figa
2013-03-03 12:08 ` Heiko Stübner
2013-03-03 12:48 ` Sylwester Nawrocki
2013-03-07 1:44 ` Kukjin Kim
2013-03-09 9:15 ` Kukjin Kim
2013-03-03 11:59 ` Sylwester Nawrocki
2013-03-03 12:34 ` Heiko Stübner
2013-02-18 8:21 ` [PATCH v6 02/16] clk: samsung: add pll clock registration helper functions Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 03/16] clk: exynos4: register clocks using common clock framework Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 04/16] clk: exynos5250: " Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 05/16] clk: exynos5440: " Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 07/16] ARM: Exynos: Initialize the clocks prior to timer initialization Thomas Abraham
2013-02-18 8:32 ` Kyungmin Park
2013-02-18 8:21 ` [PATCH v6 08/16] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 09/16] ARM: Exynos: remove auxdata table from exynos4/5 dt machine file Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 10/16] clocksource: mct: use fin_pll clock as the tick clock source for mct Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 11/16] clocksource: mct: add support for mct clock setup Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 12/16] ARM: dts: add Exynos4 and Exynos5 clock controller nodes Thomas Abraham
2013-02-18 8:21 ` Thomas Abraham [this message]
2013-02-18 8:21 ` [PATCH v6 14/16] ARM: dts: add clock provider information for all controllers in Exynos5250 SoC Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 15/16] ARM: dts: add clock provider information for all controllers in Exynos5440 SoC Thomas Abraham
2013-02-18 8:21 ` [PATCH v6 16/16] ARM: dts: add board specific fixed rate clock nodes for Exynos based platforms Thomas Abraham
2013-02-19 5:11 ` Olof Johansson
2013-03-19 18:49 ` [PATCH v6 00/16] clk: exynos4/5: migrate to common clock framework Mike Turquette
2013-03-19 21:12 ` Heiko Stübner
2013-03-19 21:50 ` Mike Turquette
2013-03-20 0:00 ` Kukjin Kim
2013-03-20 2:56 ` Mike Turquette
2013-03-20 4:50 ` Kukjin Kim
2013-03-20 14:40 ` Mike Turquette
2013-03-21 23:26 ` Kukjin Kim
2013-03-22 14:27 ` Mike Turquette
2013-03-25 1:05 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361175686-19400-14-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).