[PATCH] ARM: EXYNOS: cpuidle: Skip C1 cpuidle state for exynos5440

[tomasz.figa@gmail.com (Tomasz Figa)]

On Monday 29 of July 2013 10:16:14 amit daniel kachhap wrote:
> Hi Daniel/Tomasz,
> 
> From the discussion I can conclude that SOC check is needed in the
> cpuidle driver for deeper C states.

A check is needed for the whole cpuidle driver, so it registers only on 
Exynos SoCs which support deeper C states.

> Only the question is where to
> insert this.

Exynos doesn't support multiplatform yet, but we must make sure that any 
code being added is multiplatform-aware. So initcall is not a good idea. I 
would put this somewhere on Exynos-specific initialization path, i.e. 
something that would not called for all platforms compiled in (in case of 
multiplatform).

As I discussed with Daniel, this should be using a traditional 
platform_driver model, with the difference that it can't be registered 
from device tree, but rather statically in mach code.

For example, you can add an exynos_register_cpuidle() function in 
arch/arm/mach-exynos/common.c, which registers such platform device and 
always call it from exynos4_dt_machine_init() in mach-exynos4-dt.c. In 
mach-exynos5-dt.c you could make this conditional and check if 
!soc_is_exynos5440().

Best regards,
Tomasz

> Also to perform the SOC there can be 2 ways like
> 1) each SOC check 4120, 4412, 5250 etc (long list)
> 2) negate the nonsupporting SOC's like 5440 (small list like current
> patch) Any opinion?
>  As Bartlomiej suggested that this patch conflicts with Daniel's
> earlier patch http://marc.info/?l=linux-arm-kernel&m=137467935712513&w=2
> So I can re-base my patch on top of this one if needed.
> 
> Thanks,
> Amit Daniel
> 
> On Sun, Jul 28, 2013 at 4:01 PM, Daniel Lezcano
> 
> <daniel.lezcano@linaro.org> wrote:
> > On 07/28/2013 11:22 AM, Tomasz Figa wrote:
> >> On Sunday 28 of July 2013 09:10:09 Daniel Lezcano wrote:
> >>> On 07/24/2013 01:47 PM, Kukjin Kim wrote:
> >>>> Amit Daniel Kachhap wrote:
> >>>>> This patch skips the deep C1(AFTR -Arm off top running) state for
> >>>>> exynos5440
> >>>>> soc as this soc does not support this state. All the cpu's only
> >>>>> allows the basic
> >>>>> C0 state.
> >>>>> 
> >>>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> >>>>> ---
> >>>>> 
> >>>>>  arch/arm/mach-exynos/cpuidle.c |    2 +-
> >>>>>  1 files changed, 1 insertions(+), 1 deletions(-)
> >>>>> 
> >>>>> diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-
> >>>>> exynos/cpuidle.c
> >>>>> index 17a18ff..9a776a1 100644
> >>>>> --- a/arch/arm/mach-exynos/cpuidle.c
> >>>>> +++ b/arch/arm/mach-exynos/cpuidle.c
> >>>>> @@ -210,7 +210,7 @@ static int __init exynos4_init_cpuidle(void)
> >>>>> 
> >>>>>            device->cpu = cpu_id;
> >>>>>            
> >>>>>            /* Support IDLE only */
> >>>>> 
> >>>>> -          if (cpu_id != 0)
> >>>>> +          if (soc_is_exynos5440() || cpu_id != 0)
> >>>>> 
> >>>>>                    device->state_count = 1;
> >>>>>            
> >>>>>            ret = cpuidle_register_device(device);
> >>>>> 
> >>>>> --
> >>>>> 1.7.1
> >>>> 
> >>>> Applied, thanks.
> >>> 
> >>> You shouldn't have. This patch means exynos5540 has no cpuidle
> >>> driver at all. It should be fixed in the Kconfig to unselect
> >>> CONFIG_CPU_IDLE for an exynos5540.
> >> 
> >> To shed more light on this, let me add that you need to register a
> >> cpuidle driver only if you have more states than a simple WFI or you
> >> need some crazy steps to enter WFI. Default setup falls back to
> >> generic ARM WFI. (Daniel, do we get the nice idle stats as provided
> >> by cpuidle core then?)> 
> > Nope, but with one state, idle vs busy stats do the trick.
> > 
> > BTW, I am writing a tool to do some stats based on the idle events
> > [1].
> > It is still at a very early development stage but we can get some
> > interesting informations.
> > 
> >> Anyway, Exynos cpuidle is using an initcall to initialize and we
> >> support multiple Exynos SoCs in single zImage, so deselecting
> >> CONFIG_CPU_IDLE is not an option.
> > 
> > Good point.
> > 
> >> Considering multiplatform requirements, the driver has to
> >> 
> >> be modified to initialize only on supported platforms, either by:
> >>  a) dropping the initcall and calling the init function directly from
> >> 
> >> arch/arm/mach-exynos
> >> 
> >>  or
> >>  
> >>  b) checking if machine we are running on is supported, which would
> >>  mean a>> 
> >> long list of all Exynos SoCs that needs to be checked.
> >> 
> >> An evolution of option a) is registering a platform device somewhere
> >> in
> >> arch/arm/mach-exynos and making exynos-cpuidle a platform driver.
> > 
> > Yes, I am favorable to this solution [2].
> > 
> >> The
> >> problem is that you must register a static platform device from arch
> >> code, because cpuidle is not a real hardware block that can be put
> >> into device tree.
> > 
> > Thanks
> > 
> >   -- Daniel
> > 
> > [1]
> > https://git.linaro.org/gitweb?p=people/dlezcano/idlestat.git;a=summar
> > y [2] http://patches.linaro.org/18368/
> > 
> > --
> > 
> >  <http://www.linaro.org/> Linaro.org ? Open source software for ARM
> >  SoCs
> > 
> > Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> > <http://twitter.com/#!/linaroorg> Twitter |
> > <http://www.linaro.org/linaro-blog/> Blog
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-samsung-soc" in the body of a message to
> > majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html