From mboxrd@z Thu Jan  1 00:00:00 1970
From: lexa@cfotr.com (lexa)
Date: Mon, 25 Feb 2013 12:37:28 +0400
Subject: Debugging missing interrupts
In-Reply-To: <512B1AE6.6070903@atmel.com>
References: <1361777691.4640.34.camel@localhost> <512B1AE6.6070903@atmel.com>
Message-ID: <1361781448.4640.49.camel@localhost>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, 2013-02-25 at 16:03 +0800, Bo Shen wrote:
> Hi Lexa,
> 
> On 2/25/2013 15:34, lexa wrote:
> >
> > Hello.
> >
> > I have a trouble with debugging SSC interface(or maybe with audio
> > codec). I have a board based on Atmel AT91 (at91sam9m10g45) and codec TI
> > tlv320aic3106(using driver tlv320aic3x) connected to SSC interface in
> > I2S mode.
> 
> Which kernel version do you use?

I use 3.2.38

> SSC work as master or slave?
> 

SSC works as slave for playback and for capture(as far as i know there
no difference in configuration SSC controller). Audio codec is
generating bit clock and word clock, and ARM is receiving them.

> > Playback is works well, but the capture cause trouble.
> > The problem is that arecord don't capture any data, he just writes wav
> > header and nothing more.
> 
> Which command do you use for recording? (it will give sample rate, 
> format, and etc)
> 
> > Interrupt counter on ssc0 does not increased during capture.
> > Also i checked data and clock lines by oscilloscope, and clearly see
> > that clock and data transmitting from audio codec during capture.
> > It's seem to me, that cpu somewhat doesn't accept data from codec. But i
> > don't understand why, and how to debug this.
> >
> > I know that provided information is insufficient, but i simply don't
> > know how to get more detailed information about this problem.
> 
> Best Regards,
> Bo Shen
>