* [PATCH 1/3] USB: move bulk of otg/otg.c to phy/phy.c
2013-02-27 14:16 [PATCH 0/3] otg-for-v3.10-v1: separate phy code and add DT helper Marc Kleine-Budde
@ 2013-02-27 14:16 ` Marc Kleine-Budde
2013-02-27 14:16 ` [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type Marc Kleine-Budde
` (2 subsequent siblings)
3 siblings, 0 replies; 12+ messages in thread
From: Marc Kleine-Budde @ 2013-02-27 14:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Sascha Hauer <s.hauer@pengutronix.de>
Most of otg/otg.c is not otg specific, but phy specific, so move it
to the phy directory.
Cc: Felipe Balbi <balbi@ti.com>
Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/usb/otg/otg.c | 427 --------------------------------------------
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy.c | 438 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 439 insertions(+), 427 deletions(-)
create mode 100644 drivers/usb/phy/phy.c
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index 2bd03d2..358cfd9 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -8,436 +8,9 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
-#include <linux/kernel.h>
#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-
#include <linux/usb/otg.h>
-static LIST_HEAD(phy_list);
-static LIST_HEAD(phy_bind_list);
-static DEFINE_SPINLOCK(phy_lock);
-
-static struct usb_phy *__usb_find_phy(struct list_head *list,
- enum usb_phy_type type)
-{
- struct usb_phy *phy = NULL;
-
- list_for_each_entry(phy, list, head) {
- if (phy->type != type)
- continue;
-
- return phy;
- }
-
- return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__usb_find_phy_dev(struct device *dev,
- struct list_head *list, u8 index)
-{
- struct usb_phy_bind *phy_bind = NULL;
-
- list_for_each_entry(phy_bind, list, list) {
- if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
- phy_bind->index == index) {
- if (phy_bind->phy)
- return phy_bind->phy;
- else
- return ERR_PTR(-EPROBE_DEFER);
- }
- }
-
- return ERR_PTR(-ENODEV);
-}
-
-static struct usb_phy *__of_usb_find_phy(struct device_node *node)
-{
- struct usb_phy *phy;
-
- list_for_each_entry(phy, &phy_list, head) {
- if (node != phy->dev->of_node)
- continue;
-
- return phy;
- }
-
- return ERR_PTR(-ENODEV);
-}
-
-static void devm_usb_phy_release(struct device *dev, void *res)
-{
- struct usb_phy *phy = *(struct usb_phy **)res;
-
- usb_put_phy(phy);
-}
-
-static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
-{
- return res == match_data;
-}
-
-/**
- * devm_usb_get_phy - find the USB PHY
- * @dev - device that requests this phy
- * @type - the type of the phy the controller requires
- *
- * Gets the phy using usb_get_phy(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
-{
- struct usb_phy **ptr, *phy;
-
- ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
- if (!ptr)
- return NULL;
-
- phy = usb_get_phy(type);
- if (!IS_ERR(phy)) {
- *ptr = phy;
- devres_add(dev, ptr);
- } else
- devres_free(ptr);
-
- return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy);
-
-/**
- * usb_get_phy - find the USB PHY
- * @type - the type of the phy the controller requires
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy. The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
- struct usb_phy *phy = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&phy_lock, flags);
-
- phy = __usb_find_phy(&phy_list, type);
- if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver of type %s\n",
- usb_phy_type_string(type));
- goto err0;
- }
-
- get_device(phy->dev);
-
-err0:
- spin_unlock_irqrestore(&phy_lock, flags);
-
- return phy;
-}
-EXPORT_SYMBOL(usb_get_phy);
-
- /**
- * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
- * @dev - device that requests this phy
- * @phandle - name of the property holding the phy phandle value
- * @index - the index of the phy
- *
- * Returns the phy driver associated with the given phandle value,
- * after getting a refcount to it, -ENODEV if there is no such phy or
- * -EPROBE_DEFER if there is a phandle to the phy, but the device is
- * not yet loaded. While at that, it also associates the device with
- * the phy using devres. On driver detach, release function is invoked
- * on the devres data, then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
- const char *phandle, u8 index)
-{
- struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr;
- unsigned long flags;
- struct device_node *node;
-
- if (!dev->of_node) {
- dev_dbg(dev, "device does not have a device node entry\n");
- return ERR_PTR(-EINVAL);
- }
-
- node = of_parse_phandle(dev->of_node, phandle, index);
- if (!node) {
- dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
- dev->of_node->full_name);
- return ERR_PTR(-ENODEV);
- }
-
- ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
- if (!ptr) {
- dev_dbg(dev, "failed to allocate memory for devres\n");
- goto err0;
- }
-
- spin_lock_irqsave(&phy_lock, flags);
-
- phy = __of_usb_find_phy(node);
- if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- phy = ERR_PTR(-EPROBE_DEFER);
- devres_free(ptr);
- goto err1;
- }
-
- *ptr = phy;
- devres_add(dev, ptr);
-
- get_device(phy->dev);
-
-err1:
- spin_unlock_irqrestore(&phy_lock, flags);
-
-err0:
- of_node_put(node);
-
- return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
-
-/**
- * usb_get_phy_dev - find the USB PHY
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Returns the phy driver, after getting a refcount to it; or
- * -ENODEV if there is no such phy. The caller is responsible for
- * calling usb_put_phy() to release that count.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
-{
- struct usb_phy *phy = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&phy_lock, flags);
-
- phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
- if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver\n");
- goto err0;
- }
-
- get_device(phy->dev);
-
-err0:
- spin_unlock_irqrestore(&phy_lock, flags);
-
- return phy;
-}
-EXPORT_SYMBOL(usb_get_phy_dev);
-
-/**
- * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
- * @dev - device that requests this phy
- * @index - the index of the phy
- *
- * Gets the phy using usb_get_phy_dev(), and associates a device with it using
- * devres. On driver detach, release function is invoked on the devres data,
- * then, devres data is freed.
- *
- * For use by USB host and peripheral drivers.
- */
-struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
-{
- struct usb_phy **ptr, *phy;
-
- ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
- if (!ptr)
- return NULL;
-
- phy = usb_get_phy_dev(dev, index);
- if (!IS_ERR(phy)) {
- *ptr = phy;
- devres_add(dev, ptr);
- } else
- devres_free(ptr);
-
- return phy;
-}
-EXPORT_SYMBOL(devm_usb_get_phy_dev);
-
-/**
- * devm_usb_put_phy - release the USB PHY
- * @dev - device that wants to release this phy
- * @phy - the phy returned by devm_usb_get_phy()
- *
- * destroys the devres associated with this phy and invokes usb_put_phy
- * to release the phy.
- *
- * For use by USB host and peripheral drivers.
- */
-void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
-{
- int r;
-
- r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
- dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
-}
-EXPORT_SYMBOL(devm_usb_put_phy);
-
-/**
- * usb_put_phy - release the USB PHY
- * @x: the phy returned by usb_get_phy()
- *
- * Releases a refcount the caller received from usb_get_phy().
- *
- * For use by USB host and peripheral drivers.
- */
-void usb_put_phy(struct usb_phy *x)
-{
- if (x) {
- struct module *owner = x->dev->driver->owner;
-
- put_device(x->dev);
- module_put(owner);
- }
-}
-EXPORT_SYMBOL(usb_put_phy);
-
-/**
- * usb_add_phy - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- * @type - the type of this PHY
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
-{
- int ret = 0;
- unsigned long flags;
- struct usb_phy *phy;
-
- if (x->type != USB_PHY_TYPE_UNDEFINED) {
- dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&phy_lock, flags);
-
- list_for_each_entry(phy, &phy_list, head) {
- if (phy->type == type) {
- ret = -EBUSY;
- dev_err(x->dev, "transceiver type %s already exists\n",
- usb_phy_type_string(type));
- goto out;
- }
- }
-
- x->type = type;
- list_add_tail(&x->head, &phy_list);
-
-out:
- spin_unlock_irqrestore(&phy_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL(usb_add_phy);
-
-/**
- * usb_add_phy_dev - declare the USB PHY
- * @x: the USB phy to be used; or NULL
- *
- * This call is exclusively for use by phy drivers, which
- * coordinate the activities of drivers for host and peripheral
- * controllers, and in some cases for VBUS current regulation.
- */
-int usb_add_phy_dev(struct usb_phy *x)
-{
- struct usb_phy_bind *phy_bind;
- unsigned long flags;
-
- if (!x->dev) {
- dev_err(x->dev, "no device provided for PHY\n");
- return -EINVAL;
- }
-
- spin_lock_irqsave(&phy_lock, flags);
- list_for_each_entry(phy_bind, &phy_bind_list, list)
- if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
- phy_bind->phy = x;
-
- list_add_tail(&x->head, &phy_list);
-
- spin_unlock_irqrestore(&phy_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(usb_add_phy_dev);
-
-/**
- * usb_remove_phy - remove the OTG PHY
- * @x: the USB OTG PHY to be removed;
- *
- * This reverts the effects of usb_add_phy
- */
-void usb_remove_phy(struct usb_phy *x)
-{
- unsigned long flags;
- struct usb_phy_bind *phy_bind;
-
- spin_lock_irqsave(&phy_lock, flags);
- if (x) {
- list_for_each_entry(phy_bind, &phy_bind_list, list)
- if (phy_bind->phy == x)
- phy_bind->phy = NULL;
- list_del(&x->head);
- }
- spin_unlock_irqrestore(&phy_lock, flags);
-}
-EXPORT_SYMBOL(usb_remove_phy);
-
-/**
- * usb_bind_phy - bind the phy and the controller that uses the phy
- * @dev_name: the device name of the device that will bind to the phy
- * @index: index to specify the port number
- * @phy_dev_name: the device name of the phy
- *
- * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
- * be used when the phy driver registers the phy and when the controller
- * requests this phy.
- *
- * To be used by platform specific initialization code.
- */
-int __init usb_bind_phy(const char *dev_name, u8 index,
- const char *phy_dev_name)
-{
- struct usb_phy_bind *phy_bind;
- unsigned long flags;
-
- phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
- if (!phy_bind) {
- pr_err("phy_bind(): No memory for phy_bind");
- return -ENOMEM;
- }
-
- phy_bind->dev_name = dev_name;
- phy_bind->phy_dev_name = phy_dev_name;
- phy_bind->index = index;
-
- spin_lock_irqsave(&phy_lock, flags);
- list_add_tail(&phy_bind->list, &phy_bind_list);
- spin_unlock_irqrestore(&phy_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(usb_bind_phy);
-
const char *otg_state_string(enum usb_otg_state state)
{
switch (state) {
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b13faa1..9fa6327 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -4,6 +4,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+obj-$(CONFIG_USB_OTG_UTILS) += phy.o
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
new file mode 100644
index 0000000..bc1970c
--- /dev/null
+++ b/drivers/usb/phy/phy.c
@@ -0,0 +1,438 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004-2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+static LIST_HEAD(phy_list);
+static LIST_HEAD(phy_bind_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+ enum usb_phy_type type)
+{
+ struct usb_phy *phy = NULL;
+
+ list_for_each_entry(phy, list, head) {
+ if (phy->type != type)
+ continue;
+
+ return phy;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__usb_find_phy_dev(struct device *dev,
+ struct list_head *list, u8 index)
+{
+ struct usb_phy_bind *phy_bind = NULL;
+
+ list_for_each_entry(phy_bind, list, list) {
+ if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
+ phy_bind->index == index) {
+ if (phy_bind->phy)
+ return phy_bind->phy;
+ else
+ return ERR_PTR(-EPROBE_DEFER);
+ }
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+ struct usb_phy *phy;
+
+ list_for_each_entry(phy, &phy_list, head) {
+ if (node != phy->dev->of_node)
+ continue;
+
+ return phy;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+ struct usb_phy *phy = *(struct usb_phy **)res;
+
+ usb_put_phy(phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+ return res == match_data;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev - device that requests this phy
+ * @type - the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+ struct usb_phy **ptr, *phy;
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ phy = usb_get_phy(type);
+ if (!IS_ERR(phy)) {
+ *ptr = phy;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type - the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy. The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+ struct usb_phy *phy = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __usb_find_phy(&phy_list, type);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+ pr_err("unable to find transceiver of type %s\n",
+ usb_phy_type_string(type));
+ goto err0;
+ }
+
+ get_device(phy->dev);
+
+err0:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return phy;
+}
+EXPORT_SYMBOL(usb_get_phy);
+
+ /**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev - device that requests this phy
+ * @phandle - name of the property holding the phy phandle value
+ * @index - the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+ const char *phandle, u8 index)
+{
+ struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr;
+ unsigned long flags;
+ struct device_node *node;
+
+ if (!dev->of_node) {
+ dev_dbg(dev, "device does not have a device node entry\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ node = of_parse_phandle(dev->of_node, phandle, index);
+ if (!node) {
+ dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
+ dev->of_node->full_name);
+ return ERR_PTR(-ENODEV);
+ }
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr) {
+ dev_dbg(dev, "failed to allocate memory for devres\n");
+ goto err0;
+ }
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __of_usb_find_phy(node);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+ phy = ERR_PTR(-EPROBE_DEFER);
+ devres_free(ptr);
+ goto err1;
+ }
+
+ *ptr = phy;
+ devres_add(dev, ptr);
+
+ get_device(phy->dev);
+
+err1:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+ of_node_put(node);
+
+ return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_by_phandle);
+
+/**
+ * usb_get_phy_dev - find the USB PHY
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy. The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+ struct usb_phy *phy = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+ pr_err("unable to find transceiver\n");
+ goto err0;
+ }
+
+ get_device(phy->dev);
+
+err0:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return phy;
+}
+EXPORT_SYMBOL(usb_get_phy_dev);
+
+/**
+ * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Gets the phy using usb_get_phy_dev(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+ struct usb_phy **ptr, *phy;
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ phy = usb_get_phy_dev(dev, index);
+ if (!IS_ERR(phy)) {
+ *ptr = phy;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return phy;
+}
+EXPORT_SYMBOL(devm_usb_get_phy_dev);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev - device that wants to release this phy
+ * @phy - the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+ int r;
+
+ r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+ dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+ if (x) {
+ struct module *owner = x->dev->driver->owner;
+
+ put_device(x->dev);
+ module_put(owner);
+ }
+}
+EXPORT_SYMBOL(usb_put_phy);
+
+/**
+ * usb_add_phy - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type - the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+ int ret = 0;
+ unsigned long flags;
+ struct usb_phy *phy;
+
+ if (x->type != USB_PHY_TYPE_UNDEFINED) {
+ dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ list_for_each_entry(phy, &phy_list, head) {
+ if (phy->type == type) {
+ ret = -EBUSY;
+ dev_err(x->dev, "transceiver type %s already exists\n",
+ usb_phy_type_string(type));
+ goto out;
+ }
+ }
+
+ x->type = type;
+ list_add_tail(&x->head, &phy_list);
+
+out:
+ spin_unlock_irqrestore(&phy_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(usb_add_phy);
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+ struct usb_phy_bind *phy_bind;
+ unsigned long flags;
+
+ if (!x->dev) {
+ dev_err(x->dev, "no device provided for PHY\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&phy_lock, flags);
+ list_for_each_entry(phy_bind, &phy_bind_list, list)
+ if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
+ phy_bind->phy = x;
+
+ list_add_tail(&x->head, &phy_list);
+
+ spin_unlock_irqrestore(&phy_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+ unsigned long flags;
+ struct usb_phy_bind *phy_bind;
+
+ spin_lock_irqsave(&phy_lock, flags);
+ if (x) {
+ list_for_each_entry(phy_bind, &phy_bind_list, list)
+ if (phy_bind->phy == x)
+ phy_bind->phy = NULL;
+ list_del(&x->head);
+ }
+ spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL(usb_remove_phy);
+
+/**
+ * usb_bind_phy - bind the phy and the controller that uses the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @index: index to specify the port number
+ * @phy_dev_name: the device name of the phy
+ *
+ * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
+ * be used when the phy driver registers the phy and when the controller
+ * requests this phy.
+ *
+ * To be used by platform specific initialization code.
+ */
+int __init usb_bind_phy(const char *dev_name, u8 index,
+ const char *phy_dev_name)
+{
+ struct usb_phy_bind *phy_bind;
+ unsigned long flags;
+
+ phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
+ if (!phy_bind) {
+ pr_err("phy_bind(): No memory for phy_bind");
+ return -ENOMEM;
+ }
+
+ phy_bind->dev_name = dev_name;
+ phy_bind->phy_dev_name = phy_dev_name;
+ phy_bind->index = index;
+
+ spin_lock_irqsave(&phy_lock, flags);
+ list_add_tail(&phy_bind->list, &phy_bind_list);
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_bind_phy);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 2/3] USB: add devicetree helpers for determining dr_mode and phy_type
2013-02-27 14:16 [PATCH 0/3] otg-for-v3.10-v1: separate phy code and add DT helper Marc Kleine-Budde
2013-02-27 14:16 ` [PATCH 1/3] USB: move bulk of otg/otg.c to phy/phy.c Marc Kleine-Budde
@ 2013-02-27 14:16 ` Marc Kleine-Budde
2013-02-28 7:57 ` Felipe Balbi
2013-02-27 14:16 ` [PATCH 3/3] USB mxs-phy: Register phy with framework Marc Kleine-Budde
2013-02-27 16:29 ` [PATCH 0/3] otg-for-v3.10-v1: separate phy code and add DT helper Steffen Trumtrar
3 siblings, 1 reply; 12+ messages in thread
From: Marc Kleine-Budde @ 2013-02-27 14:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Michael Grzeschik <m.grzeschik@pengutronix.de>
This adds two little devicetree helper functions for determining the dr_mode
(host, peripheral, otg, dual-role) and phy_type (utmi, ulpi,...) from the
devicetree.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/of.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/usb-common.c | 37 ++++++++++++++++++++++++++++++++++++
include/linux/usb/of.h | 27 ++++++++++++++++++++++++++
include/linux/usb/otg.h | 8 ++++++++
include/linux/usb/phy.h | 9 +++++++++
6 files changed, 129 insertions(+)
create mode 100644 drivers/usb/phy/of.c
create mode 100644 include/linux/usb/of.h
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 9fa6327..e1be1e8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_OTG_UTILS) += phy.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d29503e..18b994b 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -14,6 +14,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb/ch9.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
const char *usb_speed_string(enum usb_device_speed speed)
{
@@ -32,4 +35,38 @@ const char *usb_speed_string(enum usb_device_speed speed)
}
EXPORT_SYMBOL_GPL(usb_speed_string);
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+ [USB_DR_MODE_UNKNOWN] = "",
+ [USB_DR_MODE_HOST] = "host",
+ [USB_DR_MODE_PERIPHERAL] = "peripheral",
+ [USB_DR_MODE_OTG] = "otg",
+ [USB_DR_MODE_DUAL_ROLE] = "dual-role",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ const char *dr_mode;
+ int err, i;
+
+ err = of_property_read_string(np, "dr_mode", &dr_mode);
+ if (err < 0)
+ return USB_DR_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+ if (!strcmp(dr_mode, usb_dr_modes[i]))
+ return i;
+
+ return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..4681a20
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,27 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e8a5fe8..6d90dff 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -99,4 +99,12 @@ otg_start_srp(struct usb_otg *otg)
/* for OTG controller drivers (and maybe other stuff) */
extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+ USB_DR_MODE_DUAL_ROLE,
+};
+
#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 15847cb..5edddb1 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
#include <linux/notifier.h>
#include <linux/usb.h>
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread