From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization
Date: Fri, 1 Mar 2013 17:40:56 +0530 [thread overview]
Message-ID: <1362139864-9233-8-git-send-email-santosh.shilimkar@ti.com> (raw)
In-Reply-To: <1362139864-9233-1-git-send-email-santosh.shilimkar@ti.com>
With consolidated code, now we can add the .init_late hook for
OMAP5 to enable power management and mux initialization.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
arch/arm/mach-omap2/board-generic.c | 1 +
arch/arm/mach-omap2/common.h | 3 ++-
arch/arm/mach-omap2/io.c | 8 ++++++++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380b..eac4ec5 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -179,6 +179,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
.init_irq = omap_gic_of_init,
.handle_irq = gic_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap5_init_late,
.timer = &omap5_timer,
.dt_compat = omap5_boards_compat,
.restart = omap44xx_restart,
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index e0f9ea7..44fcf65 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -59,7 +59,7 @@ static inline int omap3_pm_init(void)
}
#endif
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5))
int omap4_pm_init(void);
#else
static inline int omap4_pm_init(void)
@@ -108,6 +108,7 @@ void omap35xx_init_late(void);
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
+void omap5_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2c3fdd6..e6ba596 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -620,6 +620,14 @@ void __init omap5_init_early(void)
omap_cm_base_init();
omap5xxx_check_revision();
}
+
+void __init omap5_init_late(void)
+{
+ omap_mux_late_init();
+ omap2_common_pm_late_init();
+ omap4_pm_init();
+ omap2_clk_enable_autoidle_all();
+}
#endif
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
--
1.7.9.5
next prev parent reply other threads:[~2013-03-01 12:10 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 12:10 [PATCH 00/15] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 01/15] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use Santosh Shilimkar
2013-03-01 13:50 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 02/15] ARM: OMAP5: PM: Update CPU context register offset Santosh Shilimkar
2013-03-01 17:34 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 03/15] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5 Santosh Shilimkar
2013-03-01 17:43 ` Nishanth Menon
2013-03-02 5:43 ` Santosh Shilimkar
2013-03-04 18:21 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 04/15] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 05/15] ARM: OMAP5: PM: Enables ES2 PM mode by default Santosh Shilimkar
2013-03-01 19:37 ` Nishanth Menon
2013-03-02 5:47 ` Santosh Shilimkar
2013-03-04 18:29 ` Nishanth Menon
2013-03-10 18:07 ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 06/15] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains Santosh Shilimkar
2013-03-01 19:42 ` Nishanth Menon
2013-03-02 5:52 ` Santosh Shilimkar
2013-03-04 18:33 ` Nishanth Menon
2013-03-01 12:10 ` Santosh Shilimkar [this message]
2013-03-01 20:12 ` [PATCH 07/15] ARM: OMAP5: Add init_late() hook to enable pm initialization Nishanth Menon
2013-03-02 6:00 ` Santosh Shilimkar
2013-03-04 18:35 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 08/15] ARM: OMAP5: PM: Add CPU power off mode support Santosh Shilimkar
2013-03-01 21:36 ` Nishanth Menon
2013-03-02 6:14 ` Santosh Shilimkar
2013-03-04 18:38 ` Nishanth Menon
2013-03-01 12:10 ` [PATCH 09/15] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method Santosh Shilimkar
2013-03-01 21:53 ` Nishanth Menon
2013-03-02 6:16 ` Santosh Shilimkar
2013-03-01 12:10 ` [PATCH 10/15] ARM: OMAP5: PM: Add MPU Open Switch Retention support Santosh Shilimkar
2013-03-01 22:05 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 11/15] ARM: OMAP5: PM: Add L2 memory power down support Santosh Shilimkar
2013-03-01 23:43 ` Nishanth Menon
2013-03-02 6:24 ` Santosh Shilimkar
2013-03-04 18:41 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 12/15] ARM: OMAP4+: CPUidle: Cleanup idle driver for OMAP5 support Santosh Shilimkar
2013-03-01 23:56 ` Nishanth Menon
2013-03-02 6:25 ` Santosh Shilimkar
2013-03-01 12:11 ` [PATCH 13/15] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state() Santosh Shilimkar
2013-03-02 0:03 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 14/15] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support Santosh Shilimkar
2013-03-02 0:25 ` Nishanth Menon
2013-03-02 6:47 ` Santosh Shilimkar
2013-03-04 18:48 ` Nishanth Menon
2013-03-01 12:11 ` [PATCH 15/15] ARM: OMAP5: PM: handle device instance for for coldreset Santosh Shilimkar
2013-03-01 13:04 ` Nishanth Menon
2013-03-01 13:09 ` Santosh Shilimkar
2013-03-01 13:13 ` Nishanth Menon
2013-03-01 13:16 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362139864-9233-8-git-send-email-santosh.shilimkar@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).