From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/12] mmc: mxs-mmc: move to use generic DMA helper
Date: Tue, 5 Mar 2013 20:23:56 +0800 [thread overview]
Message-ID: <1362486244-24593-5-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1362486244-24593-1-git-send-email-shawn.guo@linaro.org>
With the generic DMA device tree helper supported by mxs-dma driver,
client devices only need to call dma_request_slave_channel() for
requesting a DMA channel from dmaengine.
Since mxs is a DT only platform now, along with the changes, the non-DT
case checking in probe function also gets cleaned up.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc at vger.kernel.org
---
Documentation/devicetree/bindings/mmc/mxs-mmc.txt | 12 ++++--
drivers/mmc/host/mxs-mmc.c | 48 +++------------------
2 files changed, 13 insertions(+), 47 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
index 54949f6..515addc 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -9,15 +9,19 @@ and the properties used by the mxsmmc driver.
Required properties:
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
imx23 and imx28.
-- interrupts: Should contain ERROR and DMA interrupts
-- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and SSP DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Examples:
ssp0: ssp at 80010000 {
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
- interrupts = <96 82>;
- fsl,ssp-dma-channel = <0>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
bus-width = <8>;
};
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 4efe302..4fdc711 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -548,22 +548,6 @@ static const struct mmc_host_ops mxs_mmc_ops = {
.enable_sdio_irq = mxs_mmc_enable_sdio_irq,
};
-static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
-{
- struct mxs_mmc_host *host = param;
- struct mxs_ssp *ssp = &host->ssp;
-
- if (!mxs_dma_is_apbh(chan))
- return false;
-
- if (chan->chan_id != ssp->dma_channel)
- return false;
-
- chan->private = &ssp->dma_data;
-
- return true;
-}
-
static struct platform_device_id mxs_ssp_ids[] = {
{
.name = "imx23-mmc",
@@ -591,20 +575,17 @@ static int mxs_mmc_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct mxs_mmc_host *host;
struct mmc_host *mmc;
- struct resource *iores, *dmares;
+ struct resource *iores;
struct pinctrl *pinctrl;
- int ret = 0, irq_err, irq_dma;
- dma_cap_mask_t mask;
+ int ret = 0, irq_err;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
struct mxs_ssp *ssp;
u32 bus_width = 0;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
irq_err = platform_get_irq(pdev, 0);
- irq_dma = platform_get_irq(pdev, 1);
- if (!iores || irq_err < 0 || irq_dma < 0)
+ if (!iores || irq_err < 0)
return -EINVAL;
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
@@ -620,23 +601,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
goto out_mmc_free;
}
- if (np) {
- ssp->devid = (enum mxs_ssp_id) of_id->data;
- /*
- * TODO: This is a temporary solution and should be changed
- * to use generic DMA binding later when the helpers get in.
- */
- ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
- &ssp->dma_channel);
- if (ret) {
- dev_err(mmc_dev(host->mmc),
- "failed to get dma channel\n");
- goto out_mmc_free;
- }
- } else {
- ssp->devid = pdev->id_entry->driver_data;
- ssp->dma_channel = dmares->start;
- }
+ ssp->devid = (enum mxs_ssp_id) of_id->data;
host->mmc = mmc;
host->sdio_irq_en = 0;
@@ -666,10 +631,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mxs_mmc_reset(host);
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- ssp->dma_data.chan_irq = irq_dma;
- ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+ ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!ssp->dmach) {
dev_err(mmc_dev(host->mmc),
"%s: failed to request dma\n", __func__);
--
1.7.9.5
next prev parent reply other threads:[~2013-03-05 12:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-05 12:23 [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding Shawn Guo
2013-03-05 12:23 ` [PATCH v2 01/12] ARM: dts: add generic DMA device tree binding for mxs-dma Shawn Guo
2013-03-05 19:38 ` Arnd Bergmann
2013-03-06 5:10 ` Shawn Guo
2013-03-05 12:23 ` [PATCH v2 02/12] dma: mxs-dma: use devm_* managed functions Shawn Guo
2013-03-05 12:23 ` [PATCH v2 03/12] dma: mxs-dma: move to generic device tree binding Shawn Guo
2013-03-05 12:23 ` Shawn Guo [this message]
2013-03-05 12:23 ` [PATCH v2 05/12] spi: mxs-spi: move to use generic DMA helper Shawn Guo
2013-03-05 12:23 ` [PATCH v2 06/12] i2c: i2c-mxs: " Shawn Guo
2013-03-21 11:07 ` Wolfram Sang
2013-03-05 12:23 ` [PATCH v2 07/12] mtd: gpmi: " Shawn Guo
2013-03-05 12:24 ` [PATCH v2 08/12] serial: mxs-auart: " Shawn Guo
2013-03-06 1:36 ` Greg Kroah-Hartman
2013-03-05 12:24 ` [PATCH v2 09/12] ASoC: dmaengine_pcm: add snd_dmaengine_generic_pcm_open() Shawn Guo
2013-03-05 14:37 ` [PATCH v3 " Shawn Guo
2013-03-05 23:28 ` Marek Vasut
2013-03-06 5:11 ` Shawn Guo
2013-03-06 16:41 ` Marek Vasut
2013-03-06 17:13 ` Russell King - ARM Linux
2013-03-07 2:33 ` Mark Brown
2013-03-07 9:18 ` Russell King - ARM Linux
2013-03-07 9:31 ` Mark Brown
2013-03-07 11:20 ` Russell King - ARM Linux
2013-03-08 7:43 ` Mark Brown
2013-03-05 12:24 ` [PATCH v2 10/12] ASoC: mxs: move to use generic DMA helper Shawn Guo
2013-03-05 12:24 ` [PATCH v2 11/12] dma: mxs-dma: remove code left from generic DMA binding conversion Shawn Guo
2013-03-05 12:24 ` [PATCH v2 12/12] ARM: dts: remove old DMA binding data from client nodes Shawn Guo
2013-03-05 19:39 ` [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362486244-24593-5-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).