[PATCH v3 7/7] ARM: dts: omap5: add dwc3 omap and dwc3 core dt data

[kishon@ti.com (Kishon Vijay Abraham I)]

Add dwc3 omap glue data to the omap5 dt data file. The information about
the dt node added here is available @
Documentation/devicetree/bindings/usb/omap-usb.txt.

Also added dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
data file. The information for the entered data node is available @
Documentation/devicetree/bindings/usb/dwc3.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index bd73257..24dd69f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -505,6 +505,24 @@
 			ti,type = <2>;
 		};
 
+		omap_dwc3 at 4a020000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss";
+			reg = <0x4a020000 0x1000>;
+			interrupts = <0 93 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			dwc3 at 4a030000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x4a030000 0x1000>;
+				interrupts = <0 92 4>;
+				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				tx-fifo-resize;
+			};
+		};
+
 		ocp2scp {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
-- 
1.7.10.4