From: hechtb@gmail.com (Bastian Hecht)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/7] ARM: mach-shmobile: r8a7740: Setup the timer CMT10 using DT
Date: Fri, 8 Mar 2013 12:29:41 +0100 [thread overview]
Message-ID: <1362742181-19111-8-git-send-email-hechtb+renesas@gmail.com> (raw)
In-Reply-To: <1362742181-19111-1-git-send-email-hechtb+renesas@gmail.com>
We can now use the Device Tree for bringing up our timer device CMT10 on
the SoC r8a7740.
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
---
v2: new
I can rebase this on topic/intc-of if wanted.
arch/arm/boot/dts/r8a7740.dtsi | 11 +++++++++++
arch/arm/mach-shmobile/setup-r8a7740.c | 33 --------------------------------
2 files changed, 11 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 798fa35..72f4c80 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -18,4 +18,15 @@
compatible = "arm,cortex-a9";
};
};
+
+ timer at e6138010 {
+ compatible = "renesas,cmt-timer";
+ interrupt-parent = <&intca>;
+ reg = <0xe6138010 0xc>;
+ interrupts = <0x0b00>;
+ renesas,device-id = <1>;
+ renesas,channel-id = <0>;
+ renesas,source-quality = <3>;
+ renesas,event-quality = <3>;
+ };
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 30ac79c..9db61a6 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -255,38 +255,6 @@ static struct platform_device scifb_device = {
},
};
-/* CMT */
-static struct sh_timer_config cmt10_platform_data = {
- .name = "CMT10",
- .channel_offset = 0x10,
- .timer_bit = 0,
- .clockevent_rating = 125,
- .clocksource_rating = 125,
-};
-
-static struct resource cmt10_resources[] = {
- [0] = {
- .name = "CMT10",
- .start = 0xe6138010,
- .end = 0xe613801b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x0b00),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cmt10_device = {
- .name = "sh_cmt",
- .id = 10,
- .dev = {
- .platform_data = &cmt10_platform_data,
- },
- .resource = cmt10_resources,
- .num_resources = ARRAY_SIZE(cmt10_resources),
-};
-
/* TMU */
static struct sh_timer_config tmu00_platform_data = {
.name = "TMU00",
@@ -388,7 +356,6 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
&scif6_device,
&scif7_device,
&scifb_device,
- &cmt10_device,
&tmu00_device,
&tmu01_device,
&tmu02_device,
--
1.7.9.5
prev parent reply other threads:[~2013-03-08 11:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 11:29 [PATCH v2 0/7] Enable CMT and TMU for DT Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 1/7] ARM: shmobile: Define DT bindings for timer devices Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 2/7] clocksource: sh_cmt: Add OF support Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 3/7] clocksource: sh_tmu: " Bastian Hecht
2013-03-11 11:36 ` Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 4/7] ARM: shmobile: sh73a0: Add timer DT names to clock list Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 5/7] ARM: mach-shmobile: sh73a0: Setup the timer CMT10 using DT Bastian Hecht
2013-03-11 0:17 ` Kuninori Morimoto
2013-03-11 11:33 ` Bastian Hecht
2013-03-08 11:29 ` [PATCH v2 6/7] ARM: shmobile: r8a7740: Add DT name to clock list for CMT10 Bastian Hecht
2013-03-08 11:29 ` Bastian Hecht [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362742181-19111-8-git-send-email-hechtb+renesas@gmail.com \
--to=hechtb@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).