From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/10] ASoC: phycore-ac97: Add DT support
Date: Sun, 10 Mar 2013 19:33:08 +0100 [thread overview]
Message-ID: <1362940391-8338-8-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1362940391-8338-1-git-send-email-mpa@pengutronix.de>
Add devicetree support for this audio soc fabric driver.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
sound/soc/fsl/phycore-ac97.c | 148 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 125 insertions(+), 23 deletions(-)
diff --git a/sound/soc/fsl/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c
index d146cec..a898ce3 100644
--- a/sound/soc/fsl/phycore-ac97.c
+++ b/sound/soc/fsl/phycore-ac97.c
@@ -21,6 +21,8 @@
#include "imx-audmux.h"
+#define DRV_NAME "phycore-audio-fabric"
+
static struct snd_soc_card imx_phycore;
static struct snd_soc_ops imx_phycore_hifi_ops = {
@@ -32,8 +34,13 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
.stream_name = "HiFi",
.codec_dai_name = "wm9712-hifi",
.codec_name = "wm9712-codec",
+#ifdef CONFIG_MACH_IMX27_DT
+ .cpu_dai_name = "10010000.ssi",
+ .platform_name = "imx-fiq-pcm-audio",
+#else
.cpu_dai_name = "imx-ssi.0",
.platform_name = "imx-fiq-pcm-audio.0",
+#endif
.ops = &imx_phycore_hifi_ops,
},
};
@@ -45,41 +52,53 @@ static struct snd_soc_card imx_phycore = {
.num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
};
-static struct platform_device *imx_phycore_snd_ac97_device;
+static void phycore_ac97_pca100_audmux(void)
+{
+ imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(3) |
+ IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+ IMX_AUDMUX_V1_PCR_RXDSEL(3));
+ imx_audmux_v1_configure_port(3,
+ IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V1_PCR_TFCSEL(0) |
+ IMX_AUDMUX_V1_PCR_TFSDIR |
+ IMX_AUDMUX_V1_PCR_RXDSEL(0));
+}
+
+static void phycore_ac97_pcm043_audmux(void)
+{
+ imx_audmux_v2_configure_port(3,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TFSEL(0) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(0));
+ imx_audmux_v2_configure_port(0,
+ IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+ IMX_AUDMUX_V2_PTCR_TCSEL(3) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+ IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+}
+
static struct platform_device *imx_phycore_snd_device;
+#ifndef CONFIG_MACH_IMX27_DT
+
+static struct platform_device *imx_phycore_snd_ac97_device;
+
static int __init imx_phycore_init(void)
{
int ret;
if (machine_is_pca100()) {
- imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(3) |
- IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
- IMX_AUDMUX_V1_PCR_RXDSEL(3));
- imx_audmux_v1_configure_port(3,
- IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V1_PCR_TFCSEL(0) |
- IMX_AUDMUX_V1_PCR_TFSDIR |
- IMX_AUDMUX_V1_PCR_RXDSEL(0));
+ phycore_ac97_pca100_audmux();
} else if (machine_is_pcm043()) {
- imx_audmux_v2_configure_port(3,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TFSEL(0) |
- IMX_AUDMUX_V2_PTCR_TFSDIR,
- IMX_AUDMUX_V2_PDCR_RXDSEL(0));
- imx_audmux_v2_configure_port(0,
- IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
- IMX_AUDMUX_V2_PTCR_TCSEL(3) |
- IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
- IMX_AUDMUX_V2_PDCR_RXDSEL(3));
+ phycore_ac97_pcm043_audmux();
} else {
/* return happy. We might run on a totally different machine */
return 0;
}
-
/*
* First add codec driver, otherwise soc-audio may be deferred and fails
* to load.
@@ -125,6 +144,89 @@ static void __exit imx_phycore_exit(void)
late_initcall(imx_phycore_init);
module_exit(imx_phycore_exit);
+#else /* !CONFIG_MACH_IMX27_DT */
+
+enum dev_type {
+ MX27_PCA100,
+ MX27_PCM043,
+};
+
+static const struct of_device_id imx_phycore_ac97_of_dev_id[] = {
+ {
+ .compatible = "phytec,imx27-pca100-ac97",
+ .data = (void *)MX27_PCA100,
+ }, {
+ .compatible = "phytec,imx27-pcm043-ac97",
+ .data = (void *)MX27_PCM043
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, imx_phycore_ac97_of_dev_id);
+
+static int phycore_ac97_setup_devices(struct platform_device *pdev)
+{
+ int ret;
+
+ imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
+ if (!imx_phycore_snd_device)
+ return -ENOMEM;
+
+ ret = platform_device_add(imx_phycore_snd_device);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: Platform device allocation failed\n");
+ goto fail1;
+ }
+
+ ret = snd_soc_register_card(&imx_phycore);
+ if (ret) {
+ dev_err(&pdev->dev, "ASoC: soc card registration failed\n");
+ goto fail2;
+ }
+ return 0;
+
+fail2:
+ platform_device_del(imx_phycore_snd_device);
+fail1:
+ platform_device_put(imx_phycore_snd_device);
+ return ret;
+}
+
+static int imx_phycore_ac97_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ imx_phycore.dev = &pdev->dev;
+
+ if (pdev->dev.of_node->data == MX27_PCA100)
+ phycore_ac97_pca100_audmux();
+ else
+ phycore_ac97_pcm043_audmux();
+
+ ret = phycore_ac97_setup_devices(pdev);
+ return ret;
+}
+
+static int imx_phycore_ac97_remove(struct platform_device *pdev)
+{
+ platform_device_unregister(imx_phycore_snd_device);
+ return 0;
+}
+
+static struct platform_driver imx_phycore_ac97_driver = {
+ .probe = imx_phycore_ac97_probe,
+ .remove = imx_phycore_ac97_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = imx_phycore_ac97_of_dev_id,
+ },
+};
+
+module_platform_driver(imx_phycore_ac97_driver);
+
+#endif /* CONFIG_MACH_IMX27_DT */
+
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-MODULE_DESCRIPTION("PhyCORE ALSA SoC driver");
+MODULE_DESCRIPTION(DRV_NAME ": PhyCORE ALSA SoC fabric driver");
MODULE_LICENSE("GPL");
--
1.8.1.5
next prev parent reply other threads:[~2013-03-10 18:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-10 18:33 [PATCH 00/10] ASoC: imx sound: Add DT support Markus Pargmann
2013-03-10 18:33 ` [PATCH 01/10] imx-ssi: Fix AC97 rates Markus Pargmann
2013-03-10 18:47 ` Fabio Estevam
2013-03-11 19:51 ` Markus Pargmann
2013-03-13 22:55 ` Timur Tabi
2013-03-14 12:44 ` Markus Pargmann
2013-03-12 18:52 ` Mark Brown
2013-03-10 18:33 ` [PATCH 02/10] imx-ssi: Fix occasional AC97 reset failure Markus Pargmann
2013-03-12 18:53 ` Mark Brown
2013-03-10 18:33 ` [PATCH 03/10] mx-ssi: flush fifos Markus Pargmann
2013-03-12 18:54 ` Mark Brown
2013-03-10 18:33 ` [PATCH 04/10] ASoC: Kconfig: imx-ssi needs imx-fiq and imx-dma Markus Pargmann
2013-03-12 18:55 ` Mark Brown
2013-03-14 12:42 ` Markus Pargmann
2013-03-10 18:33 ` [PATCH 05/10] ASoC: pcm030 audio fabric: remove __init from probe Markus Pargmann
2013-03-12 18:55 ` Mark Brown
2013-03-10 18:33 ` [PATCH 06/10] ARM: soc-audio phycore-ac97: fix driver init order Markus Pargmann
2013-03-11 11:10 ` Mark Brown
2013-03-11 19:56 ` Markus Pargmann
2013-03-10 18:33 ` Markus Pargmann [this message]
2013-03-12 18:59 ` [PATCH 07/10] ASoC: phycore-ac97: Add DT support Mark Brown
2013-03-14 12:55 ` Markus Pargmann
2013-03-10 18:33 ` [PATCH 08/10] ASoC: dmaengine_pcm: Add open function for DT DMA request Markus Pargmann
2013-03-12 19:02 ` Mark Brown
2013-03-13 2:18 ` Shawn Guo
2013-03-13 10:49 ` Mark Brown
2013-03-14 6:04 ` Shawn Guo
2013-03-15 1:12 ` Mark Brown
2013-03-14 13:08 ` Markus Pargmann
2013-03-15 3:42 ` Shawn Guo
2013-03-15 9:07 ` Markus Pargmann
2013-03-10 18:33 ` [PATCH 09/10] ASoC: imx-pcm-dma: Add support for DMA init by device node Markus Pargmann
2013-03-10 18:33 ` [PATCH 10/10] ASoC: imx-ssi: Add imx27 and pca100 DT support Markus Pargmann
2013-03-10 18:55 ` Alexander Shiyan
2013-03-13 22:53 ` [PATCH 00/10] ASoC: imx sound: Add " Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362940391-8338-8-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).