* [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow
@ 2013-03-12 23:13 Doug Anderson
2013-03-12 23:13 ` [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Doug Anderson @ 2013-03-12 23:13 UTC (permalink / raw)
To: linux-arm-kernel
This set of patches is based on Naveen Krishna Chatradhi's recent work
(some of which is still in-flight) and does the final touches to get
things working on exynos5250-snow (the ARM Chromebook).
These patches were tested on next-20130312 (which includes support for
the common clock framework on exynos) plus the current linux-iio/togreg:
95783f2 iio: adc: add exynos adc driver under iio framwork
298489f iio:common: Use spi_sync_transfer() in STMicroelectronics ...
1d9a4cb IIO ADC support for AD7923
9a282b0 iio: Add OF support
3d277fc3 staging:iio: Remove adt7410 driver
...plus Naveen's recent ADC cleanup and NTC thermistor patch.
Doug Anderson (4):
iio: adc: Document the regulator/clocks for exynos-adc
iio: adc: Add dt support for turning on the phy in exynos-adc
ARM: dts: Add adc to exynos5250 device tree file
ARM: dts: Add adc and thermistors for exynos5250-snow
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 12 +++++++--
arch/arm/boot/dts/cros5250-common.dtsi | 4 +++
arch/arm/boot/dts/exynos5250-snow.dts | 31 ++++++++++++++++++++++
arch/arm/boot/dts/exynos5250.dtsi | 11 ++++++++
drivers/iio/adc/exynos_adc.c | 14 +++++++++-
5 files changed, 69 insertions(+), 3 deletions(-)
--
1.8.1.3
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file 2013-03-12 23:13 [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow Doug Anderson @ 2013-03-12 23:13 ` Doug Anderson 2013-03-12 23:13 ` [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson 2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson 2 siblings, 0 replies; 10+ messages in thread From: Doug Anderson @ 2013-03-12 23:13 UTC (permalink / raw) To: linux-arm-kernel Add the device tree entry for the device-tree enabled ADC driver that recently landed in the iio tree. Signed-off-by: Doug Anderson <dianders@chromium.org> --- arch/arm/boot/dts/exynos5250.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 24c52e6..3773feb 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -115,6 +115,17 @@ interrupts = <1 2>, <22 4>; }; + adc: adc at 12D10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>, <0x10040718 0x4>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; -- 1.8.1.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow 2013-03-12 23:13 [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow Doug Anderson 2013-03-12 23:13 ` [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson @ 2013-03-12 23:13 ` Doug Anderson 2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson 2 siblings, 0 replies; 10+ messages in thread From: Doug Anderson @ 2013-03-12 23:13 UTC (permalink / raw) To: linux-arm-kernel Hook up the exynos5250-snow thermistors via the device tree now that there's a driver available to use them. Signed-off-by: Doug Anderson <dianders@chromium.org> --- arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 62eceb4..cb48981 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -305,6 +305,10 @@ status = "disabled"; }; + adc at 12D10000 { + vdd-supply = <&buck5_reg>; + }; + hdmi { hpd-gpio = <&gpx3 7 0xf 1 3>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index babd9f9..1cab5fd 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -51,4 +51,35 @@ clock-frequency = <24000000>; }; }; + + adc at 12D10000 { + ncp15wb473 at 3 { + compatible = "ntc,ncp15wb473"; + pullup-uV = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473 at 4 { + compatible = "ntc,ncp15wb473"; + pullup-uV = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473 at 5 { + compatible = "ntc,ncp15wb473"; + pullup-uV = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473 at 6 { + compatible = "ntc,ncp15wb473"; + pullup-uV = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; + }; }; -- 1.8.1.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work 2013-03-12 23:13 [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow Doug Anderson 2013-03-12 23:13 ` [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson 2013-03-12 23:13 ` [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson @ 2013-03-13 20:39 ` Doug Anderson 2013-03-13 20:40 ` [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson 2013-03-13 20:40 ` [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson 2 siblings, 2 replies; 10+ messages in thread From: Doug Anderson @ 2013-03-13 20:39 UTC (permalink / raw) To: linux-arm-kernel (some of which is still in-flight) and does the final touches to get things working on exynos5250-snow (the ARM Chromebook). These patches were tested on next-20130312 (which includes support for the common clock framework on exynos) plus the current linux-iio/togreg: 95783f2 iio: adc: add exynos adc driver under iio framwork 298489f iio:common: Use spi_sync_transfer() in STMicroelectronics ... 1d9a4cb IIO ADC support for AD7923 9a282b0 iio: Add OF support 3d277fc3 staging:iio: Remove adt7410 driver Changes in v2: - Match 'uV' -> 'uv' change in Naveen's bindings. Doug Anderson (4): iio: adc: Document the regulator/clocks for exynos-adc iio: adc: Add dt support for turning on the phy in exynos-adc ARM: dts: Add adc to exynos5250 device tree file ARM: dts: Add adc and thermistors for exynos5250-snow .../devicetree/bindings/arm/samsung/exynos-adc.txt | 12 +++++++-- arch/arm/boot/dts/cros5250-common.dtsi | 4 +++ arch/arm/boot/dts/exynos5250-snow.dts | 31 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5250.dtsi | 11 ++++++++ drivers/iio/adc/exynos_adc.c | 14 +++++++++- 5 files changed, 69 insertions(+), 3 deletions(-) -- 1.8.1.3 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file 2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson @ 2013-03-13 20:40 ` Doug Anderson 2013-03-15 15:45 ` Naveen Krishna Ch 2013-03-13 20:40 ` [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson 1 sibling, 1 reply; 10+ messages in thread From: Doug Anderson @ 2013-03-13 20:40 UTC (permalink / raw) To: linux-arm-kernel Add the device tree entry for the device-tree enabled ADC driver that recently landed in the iio tree. Signed-off-by: Doug Anderson <dianders@chromium.org> --- Changes in v2: None arch/arm/boot/dts/exynos5250.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 3acf594..1642062 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -69,6 +69,17 @@ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; + adc: adc at 12D10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>, <0x10040718 0x4>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; -- 1.8.1.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file 2013-03-13 20:40 ` [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson @ 2013-03-15 15:45 ` Naveen Krishna Ch 0 siblings, 0 replies; 10+ messages in thread From: Naveen Krishna Ch @ 2013-03-15 15:45 UTC (permalink / raw) To: linux-arm-kernel On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote: > Add the device tree entry for the device-tree enabled ADC driver that > recently landed in the iio tree. > > Signed-off-by: Doug Anderson <dianders@chromium.org> I've not used the "clock" binding yet, Will test with that and give a tag. > --- > Changes in v2: None > > arch/arm/boot/dts/exynos5250.dtsi | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index 3acf594..1642062 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -69,6 +69,17 @@ > <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; > }; > > + adc: adc at 12D10000 { > + compatible = "samsung,exynos-adc-v1"; > + reg = <0x12D10000 0x100>, <0x10040718 0x4>; > + interrupts = <0 106 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&clock 303>; > + clock-names = "adc"; > + }; > + > watchdog { > compatible = "samsung,s3c2410-wdt"; > reg = <0x101D0000 0x100>; > -- > 1.8.1.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Shine bright, (: Nav :) ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow 2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson 2013-03-13 20:40 ` [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson @ 2013-03-13 20:40 ` Doug Anderson 2013-03-15 10:24 ` Naveen Krishna Ch 1 sibling, 1 reply; 10+ messages in thread From: Doug Anderson @ 2013-03-13 20:40 UTC (permalink / raw) To: linux-arm-kernel Hook up the exynos5250-snow thermistors via the device tree now that there's a driver available to use them. Signed-off-by: Doug Anderson <dianders@chromium.org> --- Changes in v2: - Match 'uV' -> 'uv' change in Naveen's bindings. arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 46c0980..f7cc835 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -167,6 +167,10 @@ status = "disabled"; }; + adc at 12D10000 { + vdd-supply = <&buck5_reg>; + }; + hdmi { hpd-gpio = <&gpx3 7 0xf 1 3>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 17dd951..b78da7c 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -40,4 +40,35 @@ <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; }; }; + + adc at 12D10000 { + ncp15wb473 at 3 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473 at 4 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473 at 5 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473 at 6 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; + }; }; -- 1.8.1.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow 2013-03-13 20:40 ` [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson @ 2013-03-15 10:24 ` Naveen Krishna Ch 2013-03-15 15:42 ` Naveen Krishna Ch 0 siblings, 1 reply; 10+ messages in thread From: Naveen Krishna Ch @ 2013-03-15 10:24 UTC (permalink / raw) To: linux-arm-kernel Doug, On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote: > Hook up the exynos5250-snow thermistors via the device tree now that > there's a driver available to use them. > > Signed-off-by: Doug Anderson <dianders@chromium.org> > --- > Changes in v2: > - Match 'uV' -> 'uv' change in Naveen's bindings. > > arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ > arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ > 2 files changed, 35 insertions(+) > > diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi > index 46c0980..f7cc835 100644 > --- a/arch/arm/boot/dts/cros5250-common.dtsi > +++ b/arch/arm/boot/dts/cros5250-common.dtsi > @@ -167,6 +167,10 @@ > status = "disabled"; > }; > > + adc at 12D10000 { > + vdd-supply = <&buck5_reg>; > + }; > + > hdmi { > hpd-gpio = <&gpx3 7 0xf 1 3>; > }; > diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts > index 17dd951..b78da7c 100644 > --- a/arch/arm/boot/dts/exynos5250-snow.dts > +++ b/arch/arm/boot/dts/exynos5250-snow.dts > @@ -40,4 +40,35 @@ > <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; > }; > }; > + > + adc at 12D10000 { > + ncp15wb473 at 3 { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 3>; > + }; > + ncp15wb473 at 4 { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > + ncp15wb473 at 5 { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 5>; > + }; > + ncp15wb473 at 6 { > + compatible = "ntc,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 6>; > + }; > + }; > }; Thanks for the upload, i've tested with a similar changes. > -- > 1.8.1.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Shine bright, (: Nav :) ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow 2013-03-15 10:24 ` Naveen Krishna Ch @ 2013-03-15 15:42 ` Naveen Krishna Ch 2013-03-27 18:36 ` Naveen Krishna Ch 0 siblings, 1 reply; 10+ messages in thread From: Naveen Krishna Ch @ 2013-03-15 15:42 UTC (permalink / raw) To: linux-arm-kernel On 15 March 2013 15:54, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: > Doug, > > On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote: >> Hook up the exynos5250-snow thermistors via the device tree now that >> there's a driver available to use them. >> >> Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> used these changes to test on snow before submitting the ADC and NTC driver changes. >> --- >> Changes in v2: >> - Match 'uV' -> 'uv' change in Naveen's bindings. >> >> arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ >> arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ >> 2 files changed, 35 insertions(+) >> >> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi >> index 46c0980..f7cc835 100644 >> --- a/arch/arm/boot/dts/cros5250-common.dtsi >> +++ b/arch/arm/boot/dts/cros5250-common.dtsi >> @@ -167,6 +167,10 @@ >> status = "disabled"; >> }; >> >> + adc at 12D10000 { >> + vdd-supply = <&buck5_reg>; >> + }; >> + >> hdmi { >> hpd-gpio = <&gpx3 7 0xf 1 3>; >> }; >> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts >> index 17dd951..b78da7c 100644 >> --- a/arch/arm/boot/dts/exynos5250-snow.dts >> +++ b/arch/arm/boot/dts/exynos5250-snow.dts >> @@ -40,4 +40,35 @@ >> <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; >> }; >> }; >> + >> + adc at 12D10000 { >> + ncp15wb473 at 3 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 3>; >> + }; >> + ncp15wb473 at 4 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 4>; >> + }; >> + ncp15wb473 at 5 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 5>; >> + }; >> + ncp15wb473 at 6 { >> + compatible = "ntc,ncp15wb473"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <47000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 6>; >> + }; >> + }; >> }; > Thanks for the upload, i've tested with a similar changes. >> -- >> 1.8.1.3 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo at vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ > > > > -- > Shine bright, > (: Nav :) -- Shine bright, (: Nav :) ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow 2013-03-15 15:42 ` Naveen Krishna Ch @ 2013-03-27 18:36 ` Naveen Krishna Ch 0 siblings, 0 replies; 10+ messages in thread From: Naveen Krishna Ch @ 2013-03-27 18:36 UTC (permalink / raw) To: linux-arm-kernel On 15 March 2013 08:42, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: > On 15 March 2013 15:54, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: >> Doug, >> >> On 14 March 2013 02:10, Doug Anderson <dianders@chromium.org> wrote: >>> Hook up the exynos5250-snow thermistors via the device tree now that >>> there's a driver available to use them. >>> >>> Signed-off-by: Doug Anderson <dianders@chromium.org> > Tested-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > used these changes to test on snow before submitting the ADC and NTC > driver changes. Kukjin, Any update on this patch. you want us to rebase it ? >>> --- >>> Changes in v2: >>> - Match 'uV' -> 'uv' change in Naveen's bindings. >>> >>> arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ >>> arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ >>> 2 files changed, 35 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi >>> index 46c0980..f7cc835 100644 >>> --- a/arch/arm/boot/dts/cros5250-common.dtsi >>> +++ b/arch/arm/boot/dts/cros5250-common.dtsi >>> @@ -167,6 +167,10 @@ >>> status = "disabled"; >>> }; >>> >>> + adc at 12D10000 { >>> + vdd-supply = <&buck5_reg>; >>> + }; >>> + >>> hdmi { >>> hpd-gpio = <&gpx3 7 0xf 1 3>; >>> }; >>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts >>> index 17dd951..b78da7c 100644 >>> --- a/arch/arm/boot/dts/exynos5250-snow.dts >>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts >>> @@ -40,4 +40,35 @@ >>> <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; >>> }; >>> }; >>> + >>> + adc at 12D10000 { >>> + ncp15wb473 at 3 { >>> + compatible = "ntc,ncp15wb473"; >>> + pullup-uv = <1800000>; >>> + pullup-ohm = <47000>; >>> + pulldown-ohm = <0>; >>> + io-channels = <&adc 3>; >>> + }; >>> + ncp15wb473 at 4 { >>> + compatible = "ntc,ncp15wb473"; >>> + pullup-uv = <1800000>; >>> + pullup-ohm = <47000>; >>> + pulldown-ohm = <0>; >>> + io-channels = <&adc 4>; >>> + }; >>> + ncp15wb473 at 5 { >>> + compatible = "ntc,ncp15wb473"; >>> + pullup-uv = <1800000>; >>> + pullup-ohm = <47000>; >>> + pulldown-ohm = <0>; >>> + io-channels = <&adc 5>; >>> + }; >>> + ncp15wb473 at 6 { >>> + compatible = "ntc,ncp15wb473"; >>> + pullup-uv = <1800000>; >>> + pullup-ohm = <47000>; >>> + pulldown-ohm = <0>; >>> + io-channels = <&adc 6>; >>> + }; >>> + }; >>> }; >> Thanks for the upload, i've tested with a similar changes. >>> -- >>> 1.8.1.3 >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>> the body of a message to majordomo at vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> Please read the FAQ at http://www.tux.org/lkml/ >> >> >> >> -- >> Shine bright, >> (: Nav :) > > > > -- > Shine bright, > (: Nav :) -- Shine bright, (: Nav :) ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-03-27 18:36 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-03-12 23:13 [PATCH 0/4] Get exynos adc driver running on on exynos5250-snow Doug Anderson 2013-03-12 23:13 ` [PATCH 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson 2013-03-12 23:13 ` [PATCH 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson 2013-03-13 20:39 ` [PATCH v2 0/4] This set of patches is based on Naveen Krishna Chatradhi's recent work Doug Anderson 2013-03-13 20:40 ` [PATCH v2 3/4] ARM: dts: Add adc to exynos5250 device tree file Doug Anderson 2013-03-15 15:45 ` Naveen Krishna Ch 2013-03-13 20:40 ` [PATCH v2 4/4] ARM: dts: Add adc and thermistors for exynos5250-snow Doug Anderson 2013-03-15 10:24 ` Naveen Krishna Ch 2013-03-15 15:42 ` Naveen Krishna Ch 2013-03-27 18:36 ` Naveen Krishna Ch
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).