[PATCH v6 0/2] ARM: davinci: add support for dm365 vpbe display

[PATCH v6 0/2] ARM: davinci: add support for dm365 vpbe display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

This patch series enables VPBE display driver on DM365.

This patch is work on on following pull request from Hans
http://davinci-linux-open-source.1494791.n2.nabble.com/GIT-PULL-FOR-v3-10-tvp7002-davinci-blackfin-legacy-cleanups-td7582451.html

Changes for v6:
1: Fixed review comments pointed by Sekhar.

Changes for v5:
1: pass different platform names to handle different ip's.
2: Fixed review comments pointed by Sekhar.

Changes for v4:
1: Replaced the obsolete preset API by timings API.

Changes for v3:
1: Removed VPSS clock alias for master and slave which was
   sent for VPSS driver. since this patch was dependent on
   patch[1]. I will revist this patch once MC(captrure driver)
   goes into mainline.
[1] http://www.spinics.net/lists/linux-media/msg50562.html

Changes for v2:
1: Added VPSS clock so that capture and display
   can work independent.

Lad, Prabhakar (2):
  ARM: davinci: dm365: add support for v4l2 video display
  ARM: davinci: dm365 EVM: add support for VPBE display

 arch/arm/mach-davinci/board-dm365-evm.c |  166 +++++++++++++++++++++++++-
 arch/arm/mach-davinci/davinci.h         |    2 +-
 arch/arm/mach-davinci/dm365.c           |  203 +++++++++++++++++++++++++++++--
 3 files changed, 357 insertions(+), 14 deletions(-)

-- 
1.7.4.1

[PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm365.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c |    4 +-
 arch/arm/mach-davinci/davinci.h         |    2 +-
 arch/arm/mach-davinci/dm365.c           |  203 +++++++++++++++++++++++++++++--
 3 files changed, 195 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index c2d4958..cf77c46 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -564,8 +564,6 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm365_evm_map_io(void)
 {
-	/* setup input configuration for VPFE input devices */
-	dm365_set_vpfe_config(&vpfe_cfg);
 	dm365_init();
 }
 
@@ -597,6 +595,8 @@ static __init void dm365_evm_init(void)
 
 	davinci_setup_mmc(0, &dm365evm_mmc_config);
 
+	dm365_init_video(&vpfe_cfg, NULL);
+
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 12d544b..1c2670f 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -84,7 +84,7 @@ void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void __init dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
-void dm365_set_vpfe_config(struct vpfe_config *cfg);
+int __init dm365_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM644x function declarations */
 void __init dm644x_init(void);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6c39805..ec8b06e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -40,10 +40,16 @@
 
 #define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
 
+#define DM3XX_VDAC_CONFIG		0x01c4002c
+
+#define DM365_RTC_BASE			0x01c69000
+
 /* Base of key scan register bank */
 #define DM365_KEYSCAN_BASE		0x01c69400
 
-#define DM365_RTC_BASE			0x01c69000
+#define DM365_OSD_BASE			0x01c71c00
+
+#define DM365_VENC_REG_BASE		0x01c71e00
 
 #define DAVINCI_DM365_VC_BASE		0x01d0c000
 #define DAVINCI_DMA_VC_TX		2
@@ -56,6 +62,11 @@
 #define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
 #define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
 
+#define DM365_VPSS_CLK_CTRL_ADDR		0x44
+#define DM365_VPSS_VENCCLKEN_ENABLE		BIT(3)
+#define DM365_VPSS_DACCLKEN_ENABLE		BIT(4)
+#define DM365_VPSS_PLLC2SYSCLK5_ENABLE		BIT(5)
+
 static struct pll_data pll1_data = {
 	.num		= 1,
 	.phys_base	= DAVINCI_PLL1_BASE,
@@ -1226,6 +1237,186 @@ static struct platform_device dm365_isif_dev = {
 	},
 };
 
+static struct resource dm365_osd_resources[] = {
+	{
+		.start = DM365_OSD_BASE,
+		.end   = DM365_OSD_BASE + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device dm365_osd_dev = {
+	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
+	.resource	= dm365_osd_resources,
+	.dev		= {
+		.dma_mask		= &dm365_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dm365_venc_resources[] = {
+	{
+		.start = IRQ_VENCINT,
+		.end   = IRQ_VENCINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start = DM365_VENC_REG_BASE,
+		.end   = DM365_VENC_REG_BASE + 0x180,
+		.flags = IORESOURCE_MEM,
+	},
+	/* vdaccfg registers io space */
+	{
+		.start = DM3XX_VDAC_CONFIG,
+		.end   = DM3XX_VDAC_CONFIG + 4,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct resource dm365_v4l2_disp_resources[] = {
+	{
+		.start = IRQ_VENCINT,
+		.end   = IRQ_VENCINT,
+		.flags = IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start = DM365_VENC_REG_BASE,
+		.end   = DM365_VENC_REG_BASE + 0x180,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static int dm365_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
+			    int field)
+{
+	switch (if_type) {
+	case V4L2_MBUS_FMT_SGRBG8_1X8:
+		davinci_cfg_reg(DM365_VOUT_FIELD_G81);
+		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
+		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
+		break;
+
+	case V4L2_MBUS_FMT_YUYV10_1X20:
+		if (field)
+			davinci_cfg_reg(DM365_VOUT_FIELD);
+		else
+			davinci_cfg_reg(DM365_VOUT_FIELD_G81);
+		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
+		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
+				  unsigned int pclock)
+{
+	void __iomem *vpss_clkctl_reg;
+	u32 val;
+
+	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(DM365_VPSS_CLK_CTRL_ADDR);
+
+	switch (type) {
+	case VPBE_ENC_STD:
+		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+		vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+		val = DM365_VPSS_VENCCLKEN_ENABLE | DM365_VPSS_DACCLKEN_ENABLE;
+		break;
+
+	case VPBE_ENC_DV_TIMINGS:
+		if (pclock <= 27000000) {
+			vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+			vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+			val = DM365_VPSS_VENCCLKEN_ENABLE |
+			      DM365_VPSS_DACCLKEN_ENABLE;
+		} else {
+			/* set sysclk4 to output 74.25 MHz from pll1 */
+			val = DM365_VPSS_PLLC2SYSCLK5_ENABLE |
+			      DM365_VPSS_DACCLKEN_ENABLE |
+			      DM365_VPSS_VENCCLKEN_ENABLE;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	writel(val, vpss_clkctl_reg);
+
+	return 0;
+}
+
+static struct platform_device dm365_vpbe_display = {
+	.name		= "vpbe-v4l2",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(dm365_v4l2_disp_resources),
+	.resource	= dm365_v4l2_disp_resources,
+	.dev		= {
+		.dma_mask		= &dm365_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct venc_platform_data dm365_venc_pdata = {
+	.setup_pinmux	= dm365_vpbe_setup_pinmux,
+	.setup_clock	= dm365_venc_setup_clock,
+};
+
+static struct platform_device dm365_venc_dev = {
+	.name		= DM365_VPBE_VENC_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm365_venc_resources),
+	.resource	= dm365_venc_resources,
+	.dev		= {
+		.dma_mask		= &dm365_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= (void *)&dm365_venc_pdata,
+	},
+};
+
+static struct platform_device dm365_vpbe_dev = {
+	.name		= "vpbe_controller",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &dm365_video_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
+				struct vpbe_config *vpbe_cfg)
+{
+	if (vpfe_cfg || vpbe_cfg)
+		platform_device_register(&dm365_vpss_device);
+
+	if (vpfe_cfg) {
+		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
+		/* Add isif clock alias */
+		clk_add_alias("master", dm365_isif_dev.name,
+			      "vpss_master", NULL);
+		platform_device_register(&dm365_isif_dev);
+		platform_device_register(&vpfe_capture_dev);
+	}
+	if (vpbe_cfg) {
+		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
+		platform_device_register(&dm365_osd_dev);
+		platform_device_register(&dm365_venc_dev);
+		platform_device_register(&dm365_vpbe_dev);
+		platform_device_register(&dm365_vpbe_display);
+	}
+
+	return 0;
+}
+
 static int __init dm365_init_devices(void)
 {
 	if (!cpu_is_davinci_dm365())
@@ -1239,16 +1430,6 @@ static int __init dm365_init_devices(void)
 	clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
 		      NULL, &dm365_emac_device.dev);
 
-	/* Add isif clock alias */
-	clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
-	platform_device_register(&dm365_vpss_device);
-	platform_device_register(&dm365_isif_dev);
-	platform_device_register(&vpfe_capture_dev);
 	return 0;
 }
 postcore_initcall(dm365_init_devices);
-
-void dm365_set_vpfe_config(struct vpfe_config *cfg)
-{
-       vpfe_capture_dev.dev.platform_data = cfg;
-}
-- 
1.7.4.1

[PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display

[Sekhar Nori]

On 3/15/2013 8:41 PM, Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> 
> Create platform devices for various video modules like venc,osd,
> vpbe and v4l2 driver for dm365.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> ---
>  arch/arm/mach-davinci/board-dm365-evm.c |    4 +-
>  arch/arm/mach-davinci/davinci.h         |    2 +-
>  arch/arm/mach-davinci/dm365.c           |  203 +++++++++++++++++++++++++++++--
>  3 files changed, 195 insertions(+), 14 deletions(-)

> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
> index 6c39805..ec8b06e 100644
> --- a/arch/arm/mach-davinci/dm365.c
> +++ b/arch/arm/mach-davinci/dm365.c
> @@ -40,10 +40,16 @@
>  
>  #define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
>  
> +#define DM3XX_VDAC_CONFIG		0x01c4002c

DM365_VDAC_CONFIG since this is a DM365 specific file and to be
consistent with rest of the names?

> +
> +#define DM365_RTC_BASE			0x01c69000
> +
>  /* Base of key scan register bank */
>  #define DM365_KEYSCAN_BASE		0x01c69400
>  
> -#define DM365_RTC_BASE			0x01c69000
> +#define DM365_OSD_BASE			0x01c71c00
> +
> +#define DM365_VENC_REG_BASE		0x01c71e00
>  
>  #define DAVINCI_DM365_VC_BASE		0x01d0c000
>  #define DAVINCI_DMA_VC_TX		2
> @@ -56,6 +62,11 @@
>  #define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
>  #define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
>  
> +#define DM365_VPSS_CLK_CTRL_ADDR		0x44
> +#define DM365_VPSS_VENCCLKEN_ENABLE		BIT(3)
> +#define DM365_VPSS_DACCLKEN_ENABLE		BIT(4)
> +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE		BIT(5)
> +
>  static struct pll_data pll1_data = {
>  	.num		= 1,
>  	.phys_base	= DAVINCI_PLL1_BASE,
> @@ -1226,6 +1237,186 @@ static struct platform_device dm365_isif_dev = {
>  	},
>  };
>  
> +static struct resource dm365_osd_resources[] = {
> +	{
> +		.start = DM365_OSD_BASE,
> +		.end   = DM365_OSD_BASE + 0x100,
> +		.flags = IORESOURCE_MEM,
> +	},
> +};
> +
> +static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct platform_device dm365_osd_dev = {
> +	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
> +	.id		= -1,
> +	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
> +	.resource	= dm365_osd_resources,
> +	.dev		= {
> +		.dma_mask		= &dm365_video_dma_mask,
> +		.coherent_dma_mask	= DMA_BIT_MASK(32),
> +	},
> +};
> +
> +static struct resource dm365_venc_resources[] = {
> +	{
> +		.start = IRQ_VENCINT,
> +		.end   = IRQ_VENCINT,
> +		.flags = IORESOURCE_IRQ,
> +	},
> +	/* venc registers io space */
> +	{
> +		.start = DM365_VENC_REG_BASE,
> +		.end   = DM365_VENC_REG_BASE + 0x180,
> +		.flags = IORESOURCE_MEM,
> +	},
> +	/* vdaccfg registers io space */
> +	{
> +		.start = DM3XX_VDAC_CONFIG,
> +		.end   = DM3XX_VDAC_CONFIG + 4,

DM3XX_VDAC_CONFIG + 3. Check for similar errors in rest of the patch.

> +		.flags = IORESOURCE_MEM,
> +	},
> +};
> +
> +static struct resource dm365_v4l2_disp_resources[] = {
> +	{
> +		.start = IRQ_VENCINT,
> +		.end   = IRQ_VENCINT,
> +		.flags = IORESOURCE_IRQ,
> +	},
> +	/* venc registers io space */
> +	{
> +		.start = DM365_VENC_REG_BASE,
> +		.end   = DM365_VENC_REG_BASE + 0x180,
> +		.flags = IORESOURCE_MEM,
> +	},
> +};
> +

[...]

> +static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
> +				  unsigned int pclock)
> +{
> +	void __iomem *vpss_clkctl_reg;
> +	u32 val;
> +
> +	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(DM365_VPSS_CLK_CTRL_ADDR);
> +
> +	switch (type) {
> +	case VPBE_ENC_STD:
> +		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);

So as you found out, it is not correct to call driver functions from
platform code. I suggesting moving this function to driver altogether.
You just need access to DM365_VPSS_CLK_CTRL_ADDR which you can pass
using resource structures.

> +		vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
> +		val = DM365_VPSS_VENCCLKEN_ENABLE | DM365_VPSS_DACCLKEN_ENABLE;
> +		break;
> +
> +	case VPBE_ENC_DV_TIMINGS:
> +		if (pclock <= 27000000) {
> +			vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
> +			vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
> +			val = DM365_VPSS_VENCCLKEN_ENABLE |
> +			      DM365_VPSS_DACCLKEN_ENABLE;
> +		} else {
> +			/* set sysclk4 to output 74.25 MHz from pll1 */
> +			val = DM365_VPSS_PLLC2SYSCLK5_ENABLE |
> +			      DM365_VPSS_DACCLKEN_ENABLE |
> +			      DM365_VPSS_VENCCLKEN_ENABLE;
> +		}
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +	writel(val, vpss_clkctl_reg);
> +
> +	return 0;
> +}

[...]

> +int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
> +				struct vpbe_config *vpbe_cfg)
> +{
> +	if (vpfe_cfg || vpbe_cfg)
> +		platform_device_register(&dm365_vpss_device);
> +
> +	if (vpfe_cfg) {
> +		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
> +		/* Add isif clock alias */

This comment is useless. Instead please document why the aliases are
needed. I know you are just moving code here, but lets do a clean-up job
while at it.

> +		clk_add_alias("master", dm365_isif_dev.name,
> +			      "vpss_master", NULL);
> +		platform_device_register(&dm365_isif_dev);
> +		platform_device_register(&vpfe_capture_dev);
> +	}
> +	if (vpbe_cfg) {
> +		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
> +		platform_device_register(&dm365_osd_dev);
> +		platform_device_register(&dm365_venc_dev);
> +		platform_device_register(&dm365_vpbe_dev);
> +		platform_device_register(&dm365_vpbe_display);
> +	}
> +
> +	return 0;
> +}

Thanks,
Sekhar

[PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display

[Prabhakar Lad]

Sekhar,

On Mon, Mar 18, 2013 at 1:48 PM, Sekhar Nori <nsekhar@ti.com> wrote:
> On 3/15/2013 8:41 PM, Prabhakar lad wrote:
>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>
>> Create platform devices for various video modules like venc,osd,
>> vpbe and v4l2 driver for dm365.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>> ---
>>  arch/arm/mach-davinci/board-dm365-evm.c |    4 +-
>>  arch/arm/mach-davinci/davinci.h         |    2 +-
>>  arch/arm/mach-davinci/dm365.c           |  203 +++++++++++++++++++++++++++++--
>>  3 files changed, 195 insertions(+), 14 deletions(-)
>
>> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
>> index 6c39805..ec8b06e 100644
>> --- a/arch/arm/mach-davinci/dm365.c
>> +++ b/arch/arm/mach-davinci/dm365.c
>> @@ -40,10 +40,16 @@
>>
>>  #define DM365_REF_FREQ               24000000        /* 24 MHz on the DM365 EVM */
>>
>> +#define DM3XX_VDAC_CONFIG            0x01c4002c
>
> DM365_VDAC_CONFIG since this is a DM365 specific file and to be
> consistent with rest of the names?
>
OK

>> +
>> +#define DM365_RTC_BASE                       0x01c69000
>> +
>>  /* Base of key scan register bank */
>>  #define DM365_KEYSCAN_BASE           0x01c69400
>>
>> -#define DM365_RTC_BASE                       0x01c69000
>> +#define DM365_OSD_BASE                       0x01c71c00
>> +
>> +#define DM365_VENC_REG_BASE          0x01c71e00
>>
>>  #define DAVINCI_DM365_VC_BASE                0x01d0c000
>>  #define DAVINCI_DMA_VC_TX            2
>> @@ -56,6 +62,11 @@
>>  #define DM365_EMAC_CNTRL_RAM_OFFSET  0x1000
>>  #define DM365_EMAC_CNTRL_RAM_SIZE    0x2000
>>
>> +#define DM365_VPSS_CLK_CTRL_ADDR             0x44
>> +#define DM365_VPSS_VENCCLKEN_ENABLE          BIT(3)
>> +#define DM365_VPSS_DACCLKEN_ENABLE           BIT(4)
>> +#define DM365_VPSS_PLLC2SYSCLK5_ENABLE               BIT(5)
>> +
>>  static struct pll_data pll1_data = {
>>       .num            = 1,
>>       .phys_base      = DAVINCI_PLL1_BASE,
>> @@ -1226,6 +1237,186 @@ static struct platform_device dm365_isif_dev = {
>>       },
>>  };
>>
>> +static struct resource dm365_osd_resources[] = {
>> +     {
>> +             .start = DM365_OSD_BASE,
>> +             .end   = DM365_OSD_BASE + 0x100,
>> +             .flags = IORESOURCE_MEM,
>> +     },
>> +};
>> +
>> +static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
>> +
>> +static struct platform_device dm365_osd_dev = {
>> +     .name           = DM365_VPBE_OSD_SUBDEV_NAME,
>> +     .id             = -1,
>> +     .num_resources  = ARRAY_SIZE(dm365_osd_resources),
>> +     .resource       = dm365_osd_resources,
>> +     .dev            = {
>> +             .dma_mask               = &dm365_video_dma_mask,
>> +             .coherent_dma_mask      = DMA_BIT_MASK(32),
>> +     },
>> +};
>> +
>> +static struct resource dm365_venc_resources[] = {
>> +     {
>> +             .start = IRQ_VENCINT,
>> +             .end   = IRQ_VENCINT,
>> +             .flags = IORESOURCE_IRQ,
>> +     },
>> +     /* venc registers io space */
>> +     {
>> +             .start = DM365_VENC_REG_BASE,
>> +             .end   = DM365_VENC_REG_BASE + 0x180,
>> +             .flags = IORESOURCE_MEM,
>> +     },
>> +     /* vdaccfg registers io space */
>> +     {
>> +             .start = DM3XX_VDAC_CONFIG,
>> +             .end   = DM3XX_VDAC_CONFIG + 4,
>
> DM3XX_VDAC_CONFIG + 3. Check for similar errors in rest of the patch.
>
>> +             .flags = IORESOURCE_MEM,
>> +     },
>> +};
>> +
>> +static struct resource dm365_v4l2_disp_resources[] = {
>> +     {
>> +             .start = IRQ_VENCINT,
>> +             .end   = IRQ_VENCINT,
>> +             .flags = IORESOURCE_IRQ,
>> +     },
>> +     /* venc registers io space */
>> +     {
>> +             .start = DM365_VENC_REG_BASE,
>> +             .end   = DM365_VENC_REG_BASE + 0x180,
>> +             .flags = IORESOURCE_MEM,
>> +     },
>> +};
>> +
>
> [...]
>
>> +static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
>> +                               unsigned int pclock)
>> +{
>> +     void __iomem *vpss_clkctl_reg;
>> +     u32 val;
>> +
>> +     vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(DM365_VPSS_CLK_CTRL_ADDR);
>> +
>> +     switch (type) {
>> +     case VPBE_ENC_STD:
>> +             vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
>
> So as you found out, it is not correct to call driver functions from
> platform code. I suggesting moving this function to driver altogether.
> You just need access to DM365_VPSS_CLK_CTRL_ADDR which you can pass
> using resource structures.
>
OK

>> +             vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
>> +             val = DM365_VPSS_VENCCLKEN_ENABLE | DM365_VPSS_DACCLKEN_ENABLE;
>> +             break;
>> +
>> +     case VPBE_ENC_DV_TIMINGS:
>> +             if (pclock <= 27000000) {
>> +                     vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
>> +                     vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
>> +                     val = DM365_VPSS_VENCCLKEN_ENABLE |
>> +                           DM365_VPSS_DACCLKEN_ENABLE;
>> +             } else {
>> +                     /* set sysclk4 to output 74.25 MHz from pll1 */
>> +                     val = DM365_VPSS_PLLC2SYSCLK5_ENABLE |
>> +                           DM365_VPSS_DACCLKEN_ENABLE |
>> +                           DM365_VPSS_VENCCLKEN_ENABLE;
>> +             }
>> +             break;
>> +
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +     writel(val, vpss_clkctl_reg);
>> +
>> +     return 0;
>> +}
>
> [...]
>
>> +int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
>> +                             struct vpbe_config *vpbe_cfg)
>> +{
>> +     if (vpfe_cfg || vpbe_cfg)
>> +             platform_device_register(&dm365_vpss_device);
>> +
>> +     if (vpfe_cfg) {
>> +             vpfe_capture_dev.dev.platform_data = vpfe_cfg;
>> +             /* Add isif clock alias */
>
> This comment is useless. Instead please document why the aliases are
> needed. I know you are just moving code here, but lets do a clean-up job
> while at it.
>
by document you mean to add a file in Documentation folder ?

Regards,
--Prabhakar

>> +             clk_add_alias("master", dm365_isif_dev.name,
>> +                           "vpss_master", NULL);
>> +             platform_device_register(&dm365_isif_dev);
>> +             platform_device_register(&vpfe_capture_dev);
>> +     }
>> +     if (vpbe_cfg) {
>> +             dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
>> +             platform_device_register(&dm365_osd_dev);
>> +             platform_device_register(&dm365_venc_dev);
>> +             platform_device_register(&dm365_vpbe_dev);
>> +             platform_device_register(&dm365_vpbe_display);
>> +     }
>> +
>> +     return 0;
>> +}
>
> Thanks,
> Sekhar

[PATCH v6 1/2] ARM: davinci: dm365: add support for v4l2 video display

[Sekhar Nori]

On 3/18/2013 2:46 PM, Prabhakar Lad wrote:
> On Mon, Mar 18, 2013 at 1:48 PM, Sekhar Nori <nsekhar@ti.com> wrote:
>> On 3/15/2013 8:41 PM, Prabhakar lad wrote:

>>> +int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
>>> +                             struct vpbe_config *vpbe_cfg)
>>> +{
>>> +     if (vpfe_cfg || vpbe_cfg)
>>> +             platform_device_register(&dm365_vpss_device);
>>> +
>>> +     if (vpfe_cfg) {
>>> +             vpfe_capture_dev.dev.platform_data = vpfe_cfg;
>>> +             /* Add isif clock alias */
>>
>> This comment is useless. Instead please document why the aliases are
>> needed. I know you are just moving code here, but lets do a clean-up job
>> while at it.
>>
> by document you mean to add a file in Documentation folder ?

No, just modify the comment to talk about why the aliases are needed.

Thanks,
Sekhar

[PATCH v6 2/2] ARM: davinci: dm365 EVM: add support for VPBE display

[Prabhakar lad]

From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

add support for V4L2 video display to DM365 EVM.
Support for SD and ED modes is provided, along with Composite
and Component outputs.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c |  164 ++++++++++++++++++++++++++++++-
 1 files changed, 163 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index cf77c46..0518ce5 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -27,6 +27,7 @@
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/v4l2-dv-timings.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +40,7 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
 
+#include <media/ths7303.h>
 #include <media/tvp514x.h>
 
 #include "davinci.h"
@@ -374,6 +376,166 @@ static struct vpfe_config vpfe_cfg = {
 	.ccdc = "ISIF",
 };
 
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
+	{
+		.name		= "ntsc",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_525_60,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {11, 10},
+		.fps		= {30000, 1001},
+		.left_margin	= 0x79,
+		.upper_margin	= 0x10,
+	},
+	{
+		.name		= "pal",
+		.timings_type	= VPBE_ENC_STD,
+		.std_id		= V4L2_STD_625_50,
+		.interlaced	= 1,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {54, 59},
+		.fps		= {25, 1},
+		.left_margin	= 0x7E,
+		.upper_margin	= 0x16,
+	},
+};
+
+/* venc dv timings */
+static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
+	{
+		.name		= "480p59_94",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 480,
+		.aspect		= {1, 1},
+		.fps		= {5994, 100},
+		.left_margin	= 0x8F,
+		.upper_margin	= 0x2D,
+	},
+	{
+		.name		= "576p50",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
+		.interlaced	= 0,
+		.xres		= 720,
+		.yres		= 576,
+		.aspect		= {1, 1},
+		.fps		= {50, 1},
+		.left_margin	= 0x8C,
+		.upper_margin   = 0x36,
+	},
+	{
+		.name		= "720p60",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
+		.interlaced	= 0,
+		.xres		= 1280,
+		.yres		= 720,
+		.aspect		= {1, 1},
+		.fps		= {60, 1},
+		.left_margin	= 0x117,
+		.right_margin	= 70,
+		.upper_margin	= 38,
+		.lower_margin	= 3,
+		.hsync_len	= 80,
+		.vsync_len	= 5,
+	},
+	{
+		.name		= "1080i60",
+		.timings_type	= VPBE_ENC_DV_TIMINGS,
+		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
+		.interlaced	= 1,
+		.xres		= 1920,
+		.yres		= 1080,
+		.aspect		= {1, 1},
+		.fps		= {30, 1},
+		.left_margin	= 0xc9,
+		.right_margin	= 80,
+		.upper_margin	= 30,
+		.lower_margin	= 3,
+		.hsync_len	= 88,
+		.vsync_len	= 5,
+	},
+};
+
+#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular
+ * encoder.Driver uses this index to pass it to encoder when it supports more
+ * than one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm365evm_vpbe_outputs[] = {
+	{
+		.output		= {
+			.index		= 0,
+			.name		= "Composite",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.std		= VENC_STD_ALL,
+			.capabilities	= V4L2_OUT_CAP_STD,
+		},
+		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "ntsc",
+		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
+		.modes		= dm365evm_enc_std_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+	{
+		.output		= {
+			.index		= 1,
+			.name		= "Component",
+			.type		= V4L2_OUTPUT_TYPE_ANALOG,
+			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
+		},
+		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+		.default_mode	= "480p59_94",
+		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
+		.modes		= dm365evm_enc_preset_timing,
+		.if_params	= V4L2_MBUS_FMT_FIXED,
+	},
+};
+
+/*
+ * Amplifiers on the board
+ */
+struct ths7303_platform_data ths7303_pdata = {
+	.ch_1 = 3,
+	.ch_2 = 3,
+	.ch_3 = 3,
+	.init_enable = 1,
+};
+
+static struct amp_config_info vpbe_amp = {
+	.module_name	= "ths7303",
+	.is_i2c		= 1,
+	.board_info	= {
+		I2C_BOARD_INFO("ths7303", 0x2c),
+		.platform_data = &ths7303_pdata,
+	}
+};
+
+static struct vpbe_config dm365evm_display_cfg = {
+	.module_name	= "dm365-vpbe-display",
+	.i2c_adapter_id	= 1,
+	.amp		= &vpbe_amp,
+	.osd		= {
+		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
+	},
+	.venc		= {
+		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
+	},
+	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
+	.outputs	= dm365evm_vpbe_outputs,
+};
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -595,7 +757,7 @@ static __init void dm365_evm_init(void)
 
 	davinci_setup_mmc(0, &dm365evm_mmc_config);
 
-	dm365_init_video(&vpfe_cfg, NULL);
+	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
 
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
-- 
1.7.4.1