From: josephl@nvidia.com (Joseph Lo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 0/9] ARM: tegra: add platform suspend support
Date: Mon, 18 Mar 2013 16:13:11 +0800 [thread overview]
Message-ID: <1363594400-11663-1-git-send-email-josephl@nvidia.com> (raw)
This series introduces a basic functionality for Tegra to support the
platform suspend and resume.
Note: This series only adds the support for Tegra20 and Tegra30. The
Tegra114 will be supported later.
This series needs the patch below that not yet be merged into linux-mmc tree
to make the system suspend/resume function work correctly.
"mmc: tegra: use mmc_of_parse to get the support of standard MMC DT bindings"
Verified on Seaboard and Cardhu.
V4:
* add tegra_pm_validate_suspend_mode() to validate the suspend mode config
from DT
* squash the patch below into [4/9] to avoid churn after this series
[2/3] ARM: tegra: refactor the pmc_pm_set function
V3:
* fix the PMC DT configurations for paz00 board
* add a protection for only support LP2 suspend mode
V2:
* re-order the patch sequence to make sure the suspend function can be
enabled well after the last patch be merged
* squash the patches that defined the PM bindings for PMC and the
implementation
Joseph Lo (9):
gpio: tegra: add gpio wakeup source handling
ARM: tegra: irq: add wake up handling
ARM: dt: tegra: add bindings of power management configurations for
PMC
ARM: tegra: pm: add platform suspend support
ARM: dts: tegra: add power gpio keys to DT
ARM: dts: tegra: whistler: add wakeup source for KBC
ARM: dts: tegra: add non-removable and keep-power-in-suspend property
for MMC
ARM: tegra: config: defconfig update
ARM: dts: tegra: add the PM configurations of PMC
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 42 ++++++-
arch/arm/boot/dts/tegra20-harmony.dts | 17 +++
arch/arm/boot/dts/tegra20-paz00.dts | 7 ++
arch/arm/boot/dts/tegra20-seaboard.dts | 8 ++
arch/arm/boot/dts/tegra20-trimslice.dts | 20 +++
arch/arm/boot/dts/tegra20-ventana.dts | 19 +++
arch/arm/boot/dts/tegra20-whistler.dts | 10 ++
arch/arm/boot/dts/tegra30-beaver.dts | 8 ++
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 8 ++
arch/arm/configs/tegra_defconfig | 1 +
arch/arm/mach-tegra/common.c | 3 +
arch/arm/mach-tegra/irq.c | 95 ++++++++++++++-
arch/arm/mach-tegra/irq.h | 6 +
arch/arm/mach-tegra/pm.c | 93 ++++++++++++--
arch/arm/mach-tegra/pm.h | 15 +++
arch/arm/mach-tegra/pmc.c | 135 ++++++++++++++++++++-
arch/arm/mach-tegra/pmc.h | 12 +-
drivers/gpio/gpio-tegra.c | 21 +++-
20 files changed, 500 insertions(+), 22 deletions(-)
--
1.8.1.5
next reply other threads:[~2013-03-18 8:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 8:13 Joseph Lo [this message]
2013-03-18 8:13 ` [PATCH V4 1/9] gpio: tegra: add gpio wakeup source handling Joseph Lo
2013-03-19 16:52 ` Stephen Warren
2013-03-18 8:13 ` [PATCH V4 2/9] ARM: tegra: irq: add wake up handling Joseph Lo
2013-03-19 16:55 ` Stephen Warren
2013-03-18 8:13 ` [PATCH V4 3/9] ARM: dt: tegra: add bindings of power management configurations for PMC Joseph Lo
2013-03-19 17:00 ` Stephen Warren
2013-03-19 17:26 ` Stephen Warren
2013-03-18 8:13 ` [PATCH V4 4/9] ARM: tegra: pm: add platform suspend support Joseph Lo
2013-03-19 17:07 ` Stephen Warren
2013-03-20 10:26 ` Joseph Lo
2013-03-18 8:13 ` [PATCH V4 5/9] ARM: dts: tegra: add power gpio keys to DT Joseph Lo
2013-03-18 8:13 ` [PATCH V4 6/9] ARM: dts: tegra: whistler: add wakeup source for KBC Joseph Lo
2013-03-18 8:13 ` [PATCH V4 7/9] ARM: dts: tegra: add non-removable and keep-power-in-suspend property for MMC Joseph Lo
2013-03-18 8:13 ` [PATCH V4 8/9] ARM: tegra: config: defconfig update Joseph Lo
2013-03-18 8:13 ` [PATCH V4 9/9] ARM: dts: tegra: add the PM configurations of PMC Joseph Lo
2013-03-19 16:51 ` [PATCH V4 0/9] ARM: tegra: add platform suspend support Stephen Warren
2013-03-20 10:15 ` Joseph Lo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363594400-11663-1-git-send-email-josephl@nvidia.com \
--to=josephl@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).